Tender For Mtps- Ii - Mill Plant Division - Cutting, Removing The Existing Wornout/Eroded En-19 Strip Plate In Nozzle Ring Of Coal Mill A,C,E, H & Reconditioning, Strengthening Of The Existing Nozzle Ring Top & Bottom By Providing New En-19 Strip Pla
Tender Overview
Project Description
Tender for Mtps- Ii - Mill Plant Division - Cutting, Removing The Existing Wornout/Eroded En-19 Strip Plate In Nozzle Ring Of Coal Mill A,C,E, H & Reconditioning, Strengthening Of The Existing Nozzle Ring Top & Bottom By Providing New En-19 Strip Plate At Top & Bottom Of All Coal Mills A To H During Coh 2026.
BOQ
| Sl. No. | Item Description |
| 1 | Charges for cutting & removing the worn out/ eroded EN-19 strip plate of size 200 mm x 150 mm x 16 mm thick & cross plate of in between strip plate and grinding the surface for new plate fixing. |
| 2 | Charges for strengthening of existing worn out Nozzle ring by complete cleaning the worn out / Undulance nozzle ring top surface of coal mill, fabrication of new , EN-19 strip plate to required size of 200 mm x 150 mm x 16 mm thick, drilling 2 Nos. of 20 mm dia hole over each strip plate for the purpose of internal stress relieving while welding, bending the strip plate at required angle at 100 mm distance for tapper seating over the nozzle surface, pre-heating each nozzle before welding the strip plate for weldability purpose, seating the strip plate over the top of each nozzle ring without gap by heating & hammering, filling weld metal over the undulance surface of nozzle ring below the strip plate, welding the strip plate with nozzle surface by 3 runs using special type welding electrodes, welding nozzle teeth by using the cut bit of EN-19 flat plate and finally plug welding the stress relieving holes in the strip plate maching cost of EN-19 strip plate etc… |
| 3 | Charges for strengthening of existing worn out Nozzle ring by cutting , removing and grinding the worn out / Undulance nozzle ring bottom surface of coal mill,fabrication of the EN-19 plate to required size of 300 mm x 100 mm x 16 mm thick, drilling 2 Nos. of 20 mm dia hole over each strip plate for the purpose of internal stress relieving while welding, bending the strip plate at 45˚angle at 150 mm distance for tapper seating over the nozzle bottom surface, pre-heating each nozzle bottom surface before welding the 45 degree angle strip plate for weldability purpose, seating the 45˚angle strip plate over the bottom of each nozzle ring without gap by heating & hammering, filling weld metal over the undulance surface of nozzle ring below the 45˚angle strip plate, welding strip plate with nozzle surface by 3 runs using special type welding electrodes and finally plug welding the stress relieving holes strip plate after completion of strip plate welding including the cost of EN-19 plate etc… 5.0 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender