Tender For Repair/Maintenance To Flooring, Plinth Protection, Plastering & Other Connected B/R Works At Trg Area And Ranges At Lansdowne
Tender Value
23 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
17 days left
EMD
46000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance To Flooring, Plinth Protection, Plastering & Other Connected B/R Works At Trg Area And Ranges At Lansdowne
BOQ
| Sl. No. | Item Description |
| 1 | M&L for glazed ceramic coloured tiles of size not less than 450x300x7 mm thick as on vertical surfaces such as wall set and jointed in neat cement slurry and pointed with coloured cement to match over and including 15 mm thick backing coat on fair faces of brick work in CM 1:4 including dismantling of wall tiling and removing rubbish off premises complete all as specified and as directed. Note: Pattern/Texture and Finish of wall Tile shall be as approved by AGE(I). |
| 2 | M&L for non skid ceramic coloured tiles 7-8 mm thick area of each tile exe 0.11 sqm but not exe 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed or bedding layer in CM 1: 6 including dismantling of floor tiling including cement mortar bedding and removing rubbish off premises complete all as specified and as directed. Note : 1.Size and pattern/texture of Tile shall be as approved by AGE(I). |
| 3 | M&L for glazed vitrified Ceramic tiles light shade 9-10 mm thick polished, area of each tiles not exceeding 0.36 sqm, in floors etc over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling of existing flooring complete all as specified and as directed. Note : 1.Size, pattern/texture and finish of tile shall be as approved by AGE(I). |
| 4 | All as per Item No.03 above but in skirting complete all as specified and as directed. |
| 5 | M&L machine cut kota stone slab as in floor/steps 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete ncl screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6 including demolition of old slab Complete all as specified and directed. |
| 6 | M&L for 18-20 mm thick Granite slab work (table rubbed and polish) of approved quality of required size in Floor,Wall, Platform ,steps/riser and like bedded and jointed in grey cement slurry and pointed with coloured cement(1:2) using marble dust with admixture of pigment to match the shade of granite stone laid over and including 20 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder including demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and directed. |
| 7 | M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and pigment incl demolition of old tiles complete all as specified and as directed. Note: Shape, size and colour of interlocking paver block shall be as approved by AGE(I). |
| 8 | M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 9 | M&L for chequered cement concrete tiles with grey cement and pigment of size 30cmX30cmX30mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 including demolition of old tiles complete all as specified and directed. |
| 10 | M& L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate, including finishing surface of concrete topping even and rough including demolition of cement concrete in ground floor complete all as specified and directed. |
| 11 | M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, including finishing surface of concrete topping even and rough incl demolition omplete all as specified and directed. |
| 12 | M&L 75mm cement concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in plinth protection finishing cement concrete surface even and smooth without using extra cement including joints filled with glass beading including demolition of existing concrete omplete all as specified and directed. |
| 13 | Material & labour for Rendering 10 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 14 | M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement incl taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.. |
| 15 | M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as specified and directed.. |
| 16 | M&L preparation of newly plastered surface of External wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 17 | M&L for preparation of newly plastered surface of internal wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper using roller all as specified and prescribed by manufacture of paint omplete all as specified and directed. Note- Putty shall be measured and paid seperately. |
| 18 | M&L for 1mm thick Acrylic/WaterProofing Wall Putty and surface finished even and smooth with sand paper complete all as specified and directed |
| 19 | S&F fabricating coloured powder coated aluminium frame work door,windows , ventilators, with one or more rebates sections of approved tint as required including beading, cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed. |
| 20 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each omplete all as specified and directed. |
| 21 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exc 1.5 Sqm but not exceeding 4.0 Sqm each omplete all as specified and directed. |
| 22 | S&F aluminium coloured power coated door/ window /ventilator shutters, sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed. |
| 23 | S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium Ventilator/window/ incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed. |
| 24 | S & F for Stainless steel wire cloth of 0.36 mm dia wire and average width of aperture 1.40 mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed. |
| 25 | M&L for 4 mm Aluminium Composite Panels (ACP) any colour of for fixing in shutter/partition with all other necessary accessories for fixing complete all as specified and directed. |
| 26 | M&L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4 including demolition of brickwork built in cement mortar including all quoins, arches, pillars complete all as specified. |
| 27 | M & L for walling of random rubble stone masonry but except stones un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 incl demoliton complete all as specified and directed. |
| 28 | M & L for walling of random rubble stone masonry, un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 including demolition complete all as specified and directed. |
| 29 | Extra over stone walling for hammer dressing to faces of stone and dressing of faced beds and joints as specified for RR walling uncoursed or brought upto courses hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 40mm for lime or sand stone complete all as specified and directed. |
| 30 | M&L for raised pointing to RR or Polygon rubble uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed. |
| 31 | M & L for plain cement concrete type B-1, 1:2:4 (using20 mm graded stone agg) in copings, Kneelers, apex stone, bed plate, kerbs including slightly rounded or chamfered angles and throating including demolition of existing concrete complete all as specified and directed. |
| 32 | S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks triple layered white (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plasttic ball screwed for iron pipe and fixed (Minimum weight 20mm-455gms) including dismantling of water tanks complete all as specified and directed |
| 33 | All as per item no 32 above but 500Ltr complete all as specified and directed |
| 34 | Mirror polishing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish omplete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender