Tender For Machinery Component For The Installation Of New Dewatering Pump At F&V Market Parimpora Srinagar.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Dec 2026
13 days left
EMD
85000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Machinery Component For The Installation Of New Dewatering Pump At F&V Market Parimpora Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, testing & commissioning of 2 Cusec capacity self-priming type, horizontal pump set coupled through flexible tyre coupling to three-phase AC induction motor.The main specifications of the pumping unit shall be as under: PUMP: -Capacity = 2 Cusec Preferred Size = 200×200 mmType = volute casing, horizontal shaft deposition, end suction.Head at rated Capacity = 10mDuty = ContinuousBearings = Oil/grease lubricated ball or roller or bothMaterial of Construction: -Pump casing = Cast ironImpeller = Cast IronPump shaft = Carbon SteelMotor: -Rated capacity = 15 HPVoltage = 415V ± 10%Speed = 1450RPMNo. of phase = 03Frequency = 50 HZ ±5%Class of insulation = “F” or aboveDuty = ContinuousBase frame: - The pump set shall be installed on M.S channel base frame of rigid construction of suitable size. |
| 2 | Fabrication, providing, installation, testing and commissioning of 150A LT electrical control panel for controlling/distribution of power for above mentioned pumping units and illumination system of the dewatering station. The panel shall be of cubical type suitable for operating at 415V± 10%, 50Hz ± 2 %, three phase of electrical power supply. The enclosure of the panel shall be powder quoted and fabricated out of suitable sheet steel. The panel shall comprise of 100A 4-pole,415V 2 No MCCBs as incoming feeders, 63A 3-pole, 415V 2 No MCCBs as outgoing feeders, 32A double Pole 1 No MCB as auxiliary feeder and 100 A three phase on-load front-operated manual changeover switch. The panel shall comprise of FASD starters of suitable rating contactors, thermal overload relay, single phase preventer, MCCBs/MCB, busbars etc. The panel shall also consist of digital meters and neon type phase indicator lamps on incoming/outgoing feeders, and all other allied accessories. |
| 3 | Providing, Installing, Testing and commissioning of servo voltage stabilizer with following specifications: Features Minimum Requirementsa) Capacity 50kVAb) Type of winding Copper Wirec) Type of cooling Oild) Input 170-440V, 3 phase ACe) Output 415V ± 1%, 3 phase ACf) Supply Frequency 50Hz ± 3%g) Protection i) Under Voltage/ Over voltage cutoff ii) Time delay iii) Overload short circuiting cutoff through MCCB.h) Operation Automatic/manual/bypassi) Overload Capacity 110% for 10mins |
| 4 | Supply, installation, testing, and commissioning of 50 kVA 3-phase, 415 V, 50 Hz, 1500 RPM diesel generator set having brushless alternator, liquid cooled, CPCB-IV+ compliant, acoustic enclosure, control panel, integrated fuel tank, battery with charger, anti-vibration mountings. The control panel shall comprise of the following:i) Over/ Under Voltage (Alarm)ii) Battery charger fault (Alarm)iii) Low fuel oil level (Alarm)iv) Over load (Alarm)v) Low lube oil pressure (Trip)vi) High water temperature (Trip)vii) High lube oil temperature (Trip). The Engine and alternator are to be mounted on a common fabricated MS base frame. The DG set should be rated for continuous duty with overload provision of 10% for running different capacities electrical induction motor driven sewage/drainage pump set as well as illumination system. |
| 5 | Creation of 63 kVA, 11/.433 kV HT/LT Electrical Sub-Station, 2 pole structure complete with Drop Out (DO) fuses, link set, lightning arrestor, Prodigy energy meter, earthing arrangements, heat shrink kits, and suitable 150 Amp, 4 Pole, 50 kA MCCB with enclosure, all conforming to IS code/Electrical Regulatory Authority standards, including testing, commissioning, inspection, NOC charges and 3 core 25sqmm HT aluminium armoured XLPE cable network. Complete in all respects. |
| 6 | Fabrication, providing & fitting of ERW M.S Pipeline, with following Nominal Diameters & specification. The rate includes arrangement of skilled labour, tools and tackles and power back up unit which shall be arranged and brought to the site by the contracting agency. The job shall include painting of the pipes with two coats of black oxide or Enamel paint of approved shade. i. 200mm diameter, 8mm thick |
| 7 | Fabrication, providing & fitting of M.S bend/offset to be fabricated out of ERW M.S. pipe with the following Nominal Diameters. The rate includes arrangement of skilled labour, tools and tackles and power back up unit which shall be arranged and brought to the site by the contracting agency. The job shall include painting of the bend/offset with two coats of black oxide or Enamel paint of approved shade. i) Bend:200mm Dia, 8mm thickness |
| 8 | ii. Offset: 200mm Dia., 8mm thickness |
| 9 | Providing & fitting 200mm n/d foot valves heavy duty of MS construction. |
| 10 | Providing & fitting of 200mm diameter, C.I, hand operated, butterfly valve |
| 11 | Providing & fitting M.S Flanges to the M.S pipe, through electric arc welding of adequate strength & consistency. The job shall include painting of the flanges with two coats of black oxide or Enamel paint of approved shade. i) 200mm Dia., 12mm thickness |
| 12 | Providing & fitting of gaskets of RI cloth/rubber to be fitted between the flanged joints of various diameter pipes given below: - i) 200mm Dia |
| 13 | Providing & fitting of screwed fasteners for the flanged joints of various diameter pipes. |
| 14 | Supply, erection, testing and commissioning of 1 ton manually operated gantry system by way of: |
| 15 | supply/Erection/installation of steel members vertical/horizontal of ISMB 150 as per the requirement and as per the design of the in-charge engineer. The Job includes fabrication/providing/fitting of M.S supports of ISA 40×40x5 to the gantry. The jointing to be welded through electric arc welding of adequate strength and consistency or using nuts and bolts of required size as per the design of the in-charge engineer. |
| 16 | Supply and fitting of MS plates of thickness 8mm, to be fitted at the ends of ISMB 150 members, as per the site requirement. |
| 17 | Supply, fitting in position and testing of 1 ton spur gear type chain pully block with a lift of 6m. The Job includes providing and fitting of suitable size sling with U-clamp and nut bolts |
| 18 | Painting of M.S gantry comprising of bridge girder, M.S built up columns and other fixtures shall be painted with one coat of steel primer and then with two coats of supper enamel paint of yellow/orange shade. |
| 19 | Fabrication, providing and fitting of M.S chequered plate covering over sump by way of: - |
| 20 | Fabrication, providing and fitting of ISMB 150 M.S members as a supporting frame for laying of MS chequered plate of thickness 5mm over the sump, to be fabricated as per the design of Engineer in charge. The job includes fabrication of 2 Nos of windows out of M.S Chequered plate with suitable MS hinges, handles, for lifting and lowering of suction pipes. The assembly shall be painted with two coats of anticorrosive paint/Enamel paint of approved shade. |
| 21 | Supply, laying and termination including lugs, glands/termination kit of Aluminium XLPE armoured cable from HT/LT transformer to servo to panel to DG and from panel to motors of following specification: i) 3.5 core 25sqmm |
| 22 | ii) 3 core 10sqmm |
| 23 | Illumination and Earthing |
| 24 | Supply and installation of 30W LED, 10 No AL die cast flood light with suitable fixtures as per IS code with IP66. 2 No heating points and 2 No lighting points/charging points in 4 sqmm and 1.5 sqmm respectively in PVC insulated copper wire and fittings including 16A and 6A SS combines, placed and positioned as per the site requirement. |
| 25 | Supply and installation of the chemical earthing system as per the requirement of the site complete in all aspects. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender