Tender For Nctps - I - Se/Mi Circle - Aoh (26-27) - Bm Dn.- Unit-Ii - Overhaul Of Id Fans During Annual Overhaul For The Year 2026-27
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Nov 2026
2 days left
EMD
13100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Nctps - I - Se/Mi Circle - Aoh (26-27) - Bm Dn.- Unit-Ii - Overhaul Of Id Fans During Annual Overhaul For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Disconnecting the gear couplings at motor and fan ends, opening of all man hole doors. Water washing the impeller, suction, spiral casing and delivery chamber. Cleaning the gear coupling, inspecting and replace the wornout bolts. Opening the bearing housings, taking radial clearance of bearings and its condition. Cleaning the housing, end cover, bolts, base bolts, replace the wornout bolts and provide a new gaskets. Dismantle the labyrinth seal and renew the gaskets. Checking the condition of the shafts at bearing seating area. Di-penetrate test at welding joints. Including cost of consumables and T&P's. |
| 2 | Inspection of ID Fan shaft impeller mounting flange welding by opening the conical cover plate : Work involves gas cutting of cover plate, loosening of bolts of conical cover plate, dismantling of conical cover plates, cleaning of ash & rust at shaft flange welding, DPT of welding, remounting the conical cover plate, bolting and providing cover plate and welding, normalizing. Including cost of consumables and T&P's. |
| 3 | Overhaul of Lube oil Lines: Drain the working oil, dismantle the oil lines. Draining oil from coolers, opening the end covers. Dismantle the NRVs in AOP and MOP end inspection, cleaning and refixing. Box up the oil lines with proper gaskets after completion of all works and fill the working oil. Trial run of AOP. Including drawl, devolution, transportation, cost of consumables and T&P's. |
| 4 | Labour charges for cleaning and dismantling of ID fan Coolers. Including cost of consumables and T&P's |
| 5 | Labour charges for assembling of ID fan Lub oil coolers. Including cost of consumables and T&P's |
| 6 | Hydraulic testing of ID fan lub oil coolers @ 15 Kg/Cm2 pressure for 30 minutes in the presence of Board Engineer. Including cost of consumables and T&P's. |
| 7 | Arrangement of fixtures to dismantling of DE gear coupling, and dismantling of bearing housing, lifting, shifting and placing of hydraulic unit to convenient place for removing the coupling and bearing. Removal of DE side fan bearing and sealing collars etc. and supporting the shaft assembly on the wooden sleepers. Checking the bearing mounting area, measuring, rectifying the minor defects and polishing, mounting of existing DE bearing / new bearing after heating in the oil/Induction heating to 120 degree and soaking. Mounting of gear coupling to the shaft after heating in the oil bath, assly of sealing collars and oil rings etc. Assembling of bearing housing, resetting of hydraulic unit and positioning of coupling with shaft. Including cost of consumables and T&P's. (The Required Material will be supplied by TNPGCL) |
| 8 | Loosening the bed bolts for NDE bearing housing and lifting and locking of shaft, arrangement of fixtures, dismantling and removal of housing and bearing Checking the bearing mounting area, measuring, rectifying the minor defects and polishing, mounting of existing NDE bearing / new bearing after heating in the oil / Induction heating to 120 degree and soaking and mounting. Including cost of consumables and T&P's. (The Required Material will be supplied by TNPGCL) |
| 9 | Charges for removal of worn out wear plates from casing/ impeller of ID fan by heating the counter sunk bolts or gas cutting, cleaning the area of casing / impellers and Removal of worn-out wear plates in one ID fan. Including cost of consumables and T&P's. (The Required Material will be supplied by TNPGCL) |
| 10 | Charges of mounting of new / reconditioning of worn out wear plates from casing / impeller of ID fan by fixing and tightening the counter sunk bolts, cleaning the area of casing / impellers, Removal of worn-out wear plates in one ID fan. Including cost of consumables and T&P's. (The Required Material will be supplied by TNPGCL) |
| 11 | Charges for opening of voith coupling oil tank cover, drain the working oil, cleaning and checking the internals and closing the cover and renewal of working oil including cleaning the oil filters. Including cost of consumables and T&P's. |
| 12 | Alignment of ID fan to Voith Coupling/ Voith Coupling to Motor. Including cost of consumables and T&P's. |
| 13 | Removal of existing radial seals (L & R) by loosening of bolts, and renewal of new radial seal / existing removed radial seal (after reconditioning) and bolting, adjusting the radial seal for required clearance and tightened and tack welding. Including cost of consumables and T&P's. (The Required Material will be supplied by TNPGCL) |
| 14 | Rectification of damaged portions in ID fan casing: This work includes complete cleaning of casing patch up by fabrication and fixing of M.S.plate required size at damaged portions in fan casing and welding. Including cost of consumables and T&P's. (The Required Material will be supplied by TNPGCL) |
| 15 | Charges for one coat of painting the fan housing, lub oil lines, coolers, voith, ACW lines and all inspection door with enamel paint. (including cost of paint), Including cost of consumables and T&P's. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender