Tender For Repair/Replacement Of Modular Kitchen Cabinets , Cupboard Shutters And Other Connected Works Under Cell No 1 Of Ge (Nw) Nofra , Colaba, Mumbai.
Tender Value
49.03 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
16 days left
EMD
98060
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Modular Kitchen Cabinets , Cupboard Shutters And Other Connected Works Under Cell No 1 Of Ge (Nw) Nofra , Colaba, Mumbai.
BOQ
| Sl. No. | Item Description |
| 1 | Note :- Contractors/Venders shall be responsible for providing the all safety measures, equipment and scaffolding at site wherever require as per site requirement. The cost of the same shall be deemed in coated rate/amount only. There is no extra payment will be made by the dept. for the same. |
| 2 | Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing rubbish off the premises (outside MOD land) complete all as specified and directed. |
| 3 | M & L for non-skid coloured ceramic tiles 7mm to 8mm thick(squaqre or rectangular) area of each tile exceedimg 0.11Sqm but not exceeding 0.18Sqm, in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM(1:6), complete all as specified and directed. |
| 4 | M&L, Glazed ceramic tiles coloured of size 450X 300X 7mm laid on vertical surface such as dado/skirting over cement mortar backing coat, set jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick backing coat in CM 1:4, complete all as specified. |
| 5 | Taking down shutters of any description exc 1 sqm and not exc 2sqm each and refixing in the same opening after easing and adjusting. |
| 6 | Taking up or down 15mm bore steel tubing and connections, complete all as specified and directed |
| 7 | S&F 20mm dia CPVC pipes SDR 11 fittings concealed on walls/ceiling or laying in floors including fixing of pipes in wall with clamps complete all as specified. |
| 8 | S&F in repairs Sink Cock with swinging Spout (wall Mounted Model) fancy type chromium plated suitable for 15mm dia bore pipe with fittings and complete all as specified and directed. |
| 9 | Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified. |
| 10 | M&L for 18-20 mm thick Granite slab (of any type and colour as approved by GE) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms (with provn of gas pipe hole), mounte sink/Wash hand basin over including bedding layer of 20mm thick in cement mortar (1:4) for laying floor finishes including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 11 | Dismantling of boarding any description fixed in any position with screws. |
| 12 | S&F of Modular kitchen cabinet with following specifications complete all as shown on drawing of Modular kitchen and approved by GE : (a) 18mm thick Marine plywood, grade BWP (IS:710), type BB with both side 1mm thick decorative choice laminate type 1 of surface finish, colour and pattern as approved, as in front and shutters with aluminium profile handles.(b) Carcass made up of combination of 0.50mm (body panels) and 1.20mm thick (Horizontal stiffener & leg channels), epoxy poylster powder coating with dry film and shelves made up of 0.50mm thick galvanised steel shelves.(c) Grossery Kit : Taiming Tranquil Solid Drawer 175mm, 304 grade stainless steel wire basket 525MM, 2 Drawer solid Tranquil Drarwers 350MM each, Dish Kit : 175mm Tranquil Drawer, 175mm cup and saucer wire basket , 350MM Wire Basket, Thali Holder 350MM, 200MM bottle pull out 2 layer utility of 304 Garde Stainless Steel. Wicker basket unit 450MM cane wood , undermount soft closing channels, weight bearing capacity of 35Kg each.(d) Hetich hinges with CED coating for extended edge bending of 2mm thick, corrosion resistance. Legs : Hetich make PVC legs with adjustable heights. Hardware & Screws made upof stainless steel.(e) Skirting : 100mm Rehau make PVC Co-extruded skirting in metallic silver color or as approved.Make : Godrej/ Sleek/ Kutchina as approved by accepting officer. Product compliant of ISO 14001/ISO 45001/ISO 50001 & IGBC Greenpro.(This also include taking down of old U/S modular kitchen of any type.) |
| 13 | S&F of 18/19 mm thick Block boards, grade 2 quality, interior grade, with decorative face veneer on both side with decorative choice lamination as approved by GE fixed with screws to timber frame work including 6mm thick teak wood beading all around complete all as specified and directed. |
| 14 | S&F in repairs of 125mm long fancy type extruded brass handles, fabricated type fixed with nut screw and washer complete all as specified and directed. |
| 15 | S&F in repairs of magnetic catcher suitable for kitchen cabinet/coupboard with steel plate and stainless steel as required complete all as specified and as directed. |
| 16 | S&F in repairs of 100mm stainless steel butt hinges medium weight fixed with Stainless Steel Screws etc. complete all as specified and as directed. |
| 17 | Taking down cement plaster of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, complete all as specified. |
| 18 | Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces in patches, surfaces to be finished even and smooth without using extra cement, complete all as specified. |
| 19 | M & L for Anti termite treatment to wood and wood based material by drilling hole in the direction of 45 degree 150mm to 200mm deep at minimume 300mm distance in consecutive hole and applying emulsion of chemical of PREMISE or PAXTON mixed with water in the ratio of 1:20 by spraying machine minimume 250ML to 300ML emulsion should be incert in the each hole and for that 3 to 4 round spraying to be done. Finally the chemical will be mixed with white cement and make it just like the paste and incert in the hole for the closing and better results etc complete all as per specification and as directed by Engr-in-Charge. |
| 20 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat primer on 1 to 2 mm thick wall care putty. all as specified and directed. |
| 21 | M&L for preparation of old plastered surface of wall and applying one coats of oil emuslion distemper, all as specified and directed. |
| 22 | M&L for preparation of old plastered surfaces of celing and apply two coats of oil bound distemper over and including 1mm thick wall care putty complete all as specified and directed. |
| 23 | M & L for preparation of old painted steel surfaces over 10cm width or girth as in support of loft tank and applying one coats of synthetic enamel paint, complete all as specified and directed. |
| 24 | S&F in repairs of 38mm dia PVC (flexible) waste pipe 900 mm long complete. |
| 25 | S&F in repairs 75mmdia bore cast iron(Sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, fixing floors/trenches ,complete all as specified and directed. |
| 26 | S&F in repairs of cast iron floor trap,75mm dia of out let,ISI marked, with mild steel cromium plated grating, including jointing to waste pipe in plain cement concrete(1:2:4) type B-1. complete all as specified and directed. |
| 27 | S&F in repairs of gratting 125mm dia (Minimum weight 40 gms) with or without waste hole of PTMT fixed on floor/nahani trap with cement mortar, fixed in repairs, complete all as specified and directed. |
| 28 | M & L for 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work as in kitchen cabinet / cupboard and similar work fixed in repair ect complete all as specified and as directed. |
| 29 | M & L for 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work as in kitchen cabinat / cupbord and similar work fixed in repars ect complete all as specified and as directed. |
| 30 | S & F of 0.9mm thick Sunmica of choice coloure / pattern as in kitchen cabinates , cupboard / wardrobes etc and fixed with high quality adhesive after preparation and cleaning the surfces of the substrate etc complete all as specified and directed by Engr-in-Charge. |
| 31 | S&F Telescopy channels,power coated with ball bearings,suitable for sliding SS kitchen bracket 60 cm long long standard width,fixed over 2nd class hard Wood rectangular fillet sectional area exc 3 & n exc 6 sqcm, clean swan secured with screws and the fillets fixed on cuddapah stone with screws ,all as specified and directed. |
| 32 | M & L for 18 mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws as in kitchen cabinet shutters/drawers etc complete all as specified and as directed by Engr-in-Charge. |
| 33 | S & F in repairs kitchen plate racks made of rust resistant stainless steel of 1mm thick with provision of 8 to 15 vertical slots measures roughly of size 450mm x 600mm , of rust -proof electro polished or lacqer-sealed for water exposure , fixed with screws on wall etc complete all as specified and as directed by Engr-in-Charge. |
| 34 | M & L for 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice amination & other side balancing white lamination, fixed with screws to timber frame works as in repairs cupboard shutters, kitchen cabinet drawers etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 35 | M & L for 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice amination & other side balancing white lamination, fixed with screws to timber frame works as in repairs cupboard shutters, kitchen cabinet drawers etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender