Defence Statutory Bodies & Commissions/Committees Closing in 14 days TDR #58530034

Tender For Provn Of Security Chain Link Fence 2.10 Mtr Height With Angle Iron Along The Periphery And Security Lights With Allied Works At 431 (I) Sup Pl Asc Fatehgarh

Issued by Statutory Bodies & Commissions/Committees · Farrukhabad, Uttar Pradesh
Tender Value
27.93 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
14 days left
EMD
55860
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Farrukhabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Provn Of Security Chain Link Fence 2.10 Mtr Height With Angle Iron Along The Periphery And Security Lights With Allied Works At 431 (I) Sup Pl Asc Fatehgarh

BOQ

Name of Work:- PROVN OF SECURITY CHAIN LINK FENCE 2.10 MTR HEIGHT WITH ANGLE IRON ALONG THE PERIPHERY AND SECURITY LIGHTS WITH ALLIED WORKS AT 431 (I) SUP PL ASC FATEHGARH
Sl. No. Item Description
1Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, including watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.
2S&F mild steel posts and struts as in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.Note: The construction of the chain-link fencing shall be carried out in accordance with HQ CELZ Drawing No. TD-733, Sheets 1/2 to 2/2.
3S&F mild steel flat, round or square bars, in available lengths, conforming to Fe 290 (Grade E-165), complete all as specified and as directed
4M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
5M&L for reinforced cement concrete 1:2:4, Type B-1 (using 20 mm graded stone aggregate), nominal mix in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc and mass concrete, complete all as specified and directed.Note :- Reinforcement and form work shall be measured and paid for separately
6M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, hooking ends and spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed
7M&L for formwork to the sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (where required) of foundation and plinth beams, and similar works, complete all as specified and as directed
8S&F mild steel bars of 10 mm diameter and over, cut to the required lengths and bent to the specified shapes, including cranking, bending, spirally bending for column hooping, forming hooked ends, and binding with annealed mild steel wire of not less than 0.9 mm diameter or securing with clips, complete all as specified and as directed
9M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.
10M&L for preparation of new or previously untreated steel or iron surfaces of any description, not exceeding 10 cm in width or girth, when unconnected with other painting work or when painted in a different tint, and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and as directed
11S&F galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, complete all as specified and directed.Note :- Each line of horizontal /vertical/diagonal wire shall be measured for the purpose of payment.
12Supply only chain link mild steel galvanised fencing, any size or type complete all as specified and directed
13Fixing only galvanised mild steel chain-link fencing of any mesh size and type to standards, rails and straining bolts, including providing and fixing line wires, binding wire and all necessary accessories, complete all as specified and as directed Note: Chain-link fencing shall be measured and paid for separately under the relevant ‘Supply Only’ item.
14S&F mild steel screw bolts (machine made), diametre of neck 11 to 15 mm, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of the bolt exceeding 5 cm but not exceeding 10 cm complete all as specified and directed.
15S&F LED street light fitting, 60 W, comprising pressure die-cast aluminium housing, polycarbonate cover, high-power LEDs and secondary lenses, with IP66 protection and inbuilt 10 kV surge protection device (SPD), luminous efficacy not less than 110 lm/W and correlated colour temperature (CCT) of 5700 K, including necessary length of 3-core, 1.5 sq mm, multistranded copper conductor cable, PVC insulated and PVC sheathed, from the junction box to the light fitting, complete, all as specified and as directed
16S&F pole-mounted automatic street light controller panel, complete with smart timer and nature switch, housed in a specially moulded thermoplastic polycarbonate enclosure of IP66 protection (dust-tight and protected against powerful water jets), conforming to IEC 60529. The enclosure shall be self-extinguishing, flame-retardant, silicone-free and halogen-free, with corrosiveness of fumes conforming to IEC 60754-2, environment-friendly and recyclable. The enclosure shall have a transparent lid fitted with half-turn spring-return fasteners for easy operation and a suitable locking arrangement, designed for durable outdoor use. The panel shall be suitable for a three-phase load of 8 kW, complete all as specified and directed and shall comprise the following:-(i) Three-phase incoming and outgoing arrangement with 3 Nos. MCBs of 16–20 A rating, as required.(ii) 3 Nos. contactors, SP/2-pole/3-pole, 20 A rating, as required.(iii) Internal circuit wiring with 6 sqmm copper conductor cable, suitable for three-phase operation.(iv) Smart timer and photocell switch for automatic ON/OFF operation of street lights.(v) 2 Nos. suitable-size GI clamps for fixing the panel to the pole.(vi) All necessary internal connections, terminals, accessories and fixing arrangements required for proper functioning of the panel.Makes:-Contactor: Siemens / Lauritz Knudsen (L&T) / BCH or make specified in Appendix 'B'.MCBs: Schneider / Lauritz Knudsen (L&T) / Siemens or make specified in Appendix 'B'.Enclosure: Hensel / GE / Walther or equivalent make specified in Appendix 'B'.Circuit wiring: Polycab / Finolex or as specified in Appendix 'B'.
17M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, burried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanised iron or steel all as shown in electrical plate No - 3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but without earth lead protection pipe and test on completion, complete all as directed.Note :- On testing after completion if desired earth resistence is not obtained, the earthing shall be redone by the contractor at no extra cost.
18M&L for thermoplastic cable junction box, size 240 mm × 130 mm × 110 mm, having IP65/IP66 protection, with metric knockouts for cable entry, suitable for weatherproof outdoor installation, complete with suitable cable glands and 4 Nos. terminals for terminating one incoming and one outgoing underground cable of size 10/16 sqmm, 3.5/4-core, including fixing to PCC/steel poles with suitable clamps, nuts and bolts, complete all as specified and directed. Please Enable Macros to View BoQ information
19M&L for thermoplastic cable junction box, size 240 mm × 130 mm × 110 mm, having IP65/IP66 protection, with metric knockouts for cable entry, suitable for weatherproof outdoor installation, complete with suitable cable glands and 4 Nos. terminals for terminating one incoming and one outgoing underground cable of size 10/16 sqmm, 3.5/4-core, including fixing to PCC/steel poles with suitable clamps, nuts and bolts, complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58530034
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 27.93 Lakhs
LAST DATE 05-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of Security Chain Link Fence 2.10 Mtr Height With Angle Iron Along The Periphery And Security Lights With Allied Works At 431 (I) Sup Pl Asc Fatehgarh
Basic Detail
Tender No 86343/E8
Bidding Type Tender
Location
City Farrukhabad
State Uttar Pradesh
Key Dates
Publish Date 14 Nov 2026
Submission Date 05 Dec 2026
Open Date 12 Dec 2026
Finance
Tender Value 27.93 Lakhs
Tender Fee 500
EMD 55860
Exemption Not Available
Document List
19cc24bf-09df-4763-9cfd-8a49e5d16b64.html
AppxG.pdf
BOQ_896080.xls
TD733.pdf
Tenderdocuments.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 14 days
Dec 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 21 days

Tender Documents

Download All (ZIP) ↓
html

19cc24bf-09df-4763-9cfd-8a49e5d16b64.html

pdf

AppxG.pdf

xls

BOQ_896080.xls

pdf

TD733.pdf

pdf

Tenderdocuments.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender