Tender For Provn Of Upvc Partitions With Panels At Building No P-73 Addn/Altn To Wicket Gate Of Main Gate At Afac Coimbatore.
Tender Value
9.41 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
20 days left
EMD
18820
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Upvc Partitions With Panels At Building No P-73 Addn/Altn To Wicket Gate Of Main Gate At Afac Coimbatore.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) Openable (double leaf/ single leaf) or fixable Door made of extruded profile wilh wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, . Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass complete fixed to wall and floor surfaces with cleats, screws etc including necessary joining clips, rubber packing, snap beading, screws etc complete all as specified of appropriate make as described by Engr in charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.Note : Casement door double panel with French (False) Mullion with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) & French (False) mullion (55 mm & above) x (60 mm & above). (Height upto 2.5 metre). |
| 2 | S & F 5.5 mm thick Sheet glass size exc 0.50sqm in each panes with Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers .all as specified and directed. |
| 3 | Material and labour for preparing, washing, rubbingdown and stopping of distempered and complete removal of existing treatment and painted surfaces and applying two coat of oil bound distemper over a coat of alkali resistant primer with 3mm wall care putty on old decorated walls, pillasters, cornices etc all as directed. |
| 4 | M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard and dense soil. |
| 5 | M & L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area |
| 6 | M&L for cement concrete Type D2 1:4:8 (40mm graded aggregates) in foundations, filling and mass, complete all as specified. |
| 7 | M & L for Flat Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified. |
| 8 | M & L for cement concrete of M-30 grade (20mm graded aggregates) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified. |
| 9 | M & L for flat square Formwork to rough concrete surfaces sides of pillars, posts, struts, piers, columns and stanchions , complete all as specified. |
| 10 | M & L for cement concrete of M-30 grade (20mm graded aggregates) for Columns, pillars, piers, posts and struts, complete all as specified. |
| 11 | M & L for Flat Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of finished concrete, complete all as specified. |
| 12 | M & L for reinforced cement concrete of design mix M-30 grade (20mm graded aggregates) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified. |
| 13 | M&L for flat formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete. |
| 14 | M&L for RCC design mix M-25 (20mm graded aggregate) in chajjas etc. |
| 15 | M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified. |
| 16 | M & L for Mild steel TMT bars 6mm to 8mm diaTMT bars cut to legth, bent to shape required including cranking bending spirally for hooping for slab for manhole etc complete all as directed. |
| 17 | M & L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified. |
| 18 | M&L for brick work with flyash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in modular bricks of cement mortar 1:6 complete all as specified and directed. |
| 19 | M&L for brickwork with flyash bricks, old size, straight or curved on plan to any radius in half brick thick walls built in modular bricks of cement mortar (1:4) complete all as specified and directed. |
| 20 | M&L Rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement. all as specified and directed. |
| 21 | M & L for Rendering work 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified. |
| 22 | M & L for Rendering work 05mm thick on fair faces of brick work or concrete surfaces (Celling) in cement mortar 1:3, rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified. |
| 23 | Supply only integral water proofing compound. |
| 24 | M & L prepation of newly plastered wall surfaces and applying two coats of distemper oil- emulsion over a coat of primer on wall on wall all as specified and as directed . |
| 25 | M & L prepaeation newly plastered of wall surfaces and applying two coats of acrylic smooth exterior paint of required shade (applied @ 1.67ltr/10 Sqm) over and including priming coat of exterior primer @2.20 Kg/10 Sqm) all as specified . |
| 26 | M & L for Preparing newly surfaces plastered or unplastered celling and applying three coat of white wash, complete all as specified. |
| 27 | M & L for Hardcore of gauge n exc. 63 mm, broken stone or boulder deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified. |
| 28 | M&L for plain cement concrete 100 mm thick of 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in levelling course of sub floors, sub-base, floors and paving etc., complete all as specified and directed. |
| 29 | M&L for Screed bed or bedding layer of mortor 20 mm thick in CM 1:4 for laying floor finishes all as specified and directed. |
| 30 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete,all and as directed. |
| 31 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 13014 |
| 32 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 as in backing coat of skirting /dado all as specified and directed. |
| 33 | M&L for 1st class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed. |
| 34 | S&F 40mm thick 2nd class HW rails Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified |
| 35 | S&F 100mm long butt hinges, type C-22 extruded aluminium anodised with brass hinge pin, anodised and fixed and all as specified and directed complete and all as specified and directed. |
| 36 | S&F 150mm long Aluminium anodised barrel towers bolts of extruded section and all as specified and directed |
| 37 | S&F 150mm extruded aluminium alloy handles, fabricated type anodised as specified and directed |
| 38 | M & L for Steel windows for industrial buildings with centre hung shutters including brass pivots, catch spring and pulley wheel , complete all as specified. |
| 39 | M&L framed work such as grills ,grating etc with ends of bars shouldered or riveted, or forged into spikes conforming to Fe 290-Gde -E-165. |
| 40 | M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 41 | M & L for Surface excavation not exc 30 cm and averaging 15 cm deep and getting out in hard/dense soil, all as specified. |
| 42 | M & L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area → |
| 43 | M&L 75mm thick cement concrete type C-2 , 1:3:6 (using 40mm graded stone aggregate as in plinth protection in alternative bay and surface finish even and smooth with out using extra cement complete all specified and directed. |
| 44 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 45 | Demolition of (Unreinforcement) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 46 | M&L for plain cement concrete 1;4:8, type D-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and as directed. |
| 47 | Demolition of brick work built in cement mortar or cement lime mortar .complete all as specified and directed at site. |
| 48 | M&L for PCC 1:3:6, type C1 (using 20 mm graded stone aggregate) for coping and benching inside the manholes including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed. |
| 49 | M & L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/ dense soil. |
| 50 | M&L for Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all specified and directed. |
| 51 | Supplyng and laying of XLPE insulated armoured heavey duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 sq mm 4 core all as directed. |
| 52 | Excavation in trenches not exceeding 1.5 m wide and n.exc 1.5 m deth for foundation etc of for shafts,wells, cesspits, manholes, pier holes, etc not exc 10 sq mtr on plan and not exc 1.5 mtr in depth and getting out soft/loose soil for laying of pipes complete all as specified and directed. |
| 53 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 CM thick for soft/loose soil complete all as specified and directed. |
| 54 | Removing excavated materials (soils) to a distance not exc 50m and depositing where directed at a level not exc1.5 m above the starting point all as specified and as directed. |
| 55 | Earth cushioning to UG cables using excavated soil riddled by using large sieve to separate the composite particles/roots etc and refilling in trenches all as specified and as directed. Note: Punned thickness will be measured for payment. |
| 56 | Supply and lay old size bricks common burnt clay building bricks sub-class 'B' designation 75 all as sdirected Note (i) The bricks lay a cable protection |
| 57 | Supply and laying tubes light grade galvanised with all fittings laid in trenches of dia 50 mm all as directed for cable protection |
| 58 | M&L for dismantling / cutting of existing road / path / hard standing cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) suitable for laying pipes up to 50 mm dia under the road / path / hard standing complete. |
| 59 | Material and labour for cement concrete in foundations, filling and mass conrete type B 2 (1:2:4) (using 40 mm graded crushed stone aggregate) for making good the disturbed surface of road/path/hard standing by using cement contrete mortar 1:2:4 type B2, using 40 mm graded stone aggregate 0.45 mtr wide and 0.15 mtr thick complete all as specified and directed. Note (i) Removing the debris from site complete deemed to be included in quated rate |
| 60 | Supply and laying PVC non metalic conduit including tees, bends, elbows, reducers, and fixing accessaries etc for telephone/TV connection of size 20 mm dia all as directed Note (i) TV/Telephone cable provide by user section . |
| 61 | Supply and fixing PVC non metalic junction boxes one to four way for telephone/TV connection of size 20 mm dia all as directed |
| 62 | M&L for concealed Point wiring one light/bell point controlled by one, one way switch complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately. |
| 63 | All as per item No 62 herein before but one ceiling/exhaust fan point controlled by one, one way switch. |
| 64 | All as per item No 62 herein before but one 05 Amps socket outlet point on same board. |
| 65 | All as per item No 62 herein before but one switch socket outlet point 5 Amps on independent board. |
| 66 | All as per item No. 62 here-in-before but with copper conductor cable FRLS, 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board. |
| 67 | All as per item no 62 above but copper conductor FRLS 4 Sq mm |
| 68 | S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed. |
| 69 | S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed. |
| 70 | S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed. |
| 71 | S&F socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and as directed. |
| 72 | Supply and fixing LED lights fitting 1 x 18/ 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 73 | Supply and fixing LED light fitting round/squre type 12 watts 230 volts recessed/surfac type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof /celing including connecting up with three core flexiblecopper conductor cable of suitable size complete. |
| 74 | Supply and fixing LED street light fitting 60/70 watt 230 V AC outdoort type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including necessary mounting bracket with nut bolts and mounting on wall or roof etc including taking down unserviceable fitting all as directed. |
| 75 | Supply and fixing ceiling fans complete with blades, down rods electronic modular regulator two module and accessories 230 volts 1200 mm sweep minimum air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) all as directed |
| 76 | Supply and fix lamp holder PVC/Polycorbonate type with back plate suitable for battern/angle fittings all as directed |
| 77 | Supply and fix MCB DB, TPN, 4 ways, double door, 415 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete. Make: L&T/Legrand/ Havells |
| 78 | Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, \\"B\\" Curve complete. Make: L&T/Legrand/ Havells |
| 79 | Supply and fixing TP 25 to 63 Amp rating 415 V, 10 KA 'C' curve miniature circuit breaker (MCB) complete. Make: L&T/Legrand/ Havells |
| 80 | Supply and fixing TPN 32 Amp rating 415 V, 10 KA 'C' curve miniature circuit breaker (MCB) complete. Make: L&T/Legrand/ Havells |
| 81 | M&L for concealed Sub main wiring by making recess in wall/surface complete with 4 runs of 2.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 2.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc from Main DB to MCB DB all as specified and as directed by engr - in- charge. Note :- (i) 4 runs of 2.5 sqmm, + 1 run of 2.5 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length. (ii) Electric hooter and starter provided by user section |
| 82 | Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals. |
| 83 | Supply and fix modular telphone socket RJ 11 one module including taking down unserviceable socket all as directed |
| 84 | M & L for earthing complete with GI earth plate electrode 600 x 600 x 6.3 mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to GI earth lead 4 mm wire by means of bolts, nuts, check nuts/bracing and washers all as shown in electrical plate No. 3 of SSR Part-I and including necessary excavation and earth work in any type of soil, removal and refilling of soil and funnel with wire mesh and GI watering pipe 20mm dia, Chamber in PCC 1:3:6, type C1 using 20mm graded stone aggregate and 40mm thick cover in RCC 1:2:4, type B1 using 20mm graded stone aggregate and reinforced with 8mm dia TMT bars at 150mm c/c on both ways, with flush type handle with 16mm dia round bars and 15 mm dia GI pipe upto 7.5m for protection and connected to earthing test point all as specified or indicated including testing on completion. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender