Tender For Provn Of Watch Tower In Pocket A And B Main Gate At Afac Coimbatore.
Tender Value
9.30 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
18600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Watch Tower In Pocket A And B Main Gate At Afac Coimbatore.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil. |
| 2 | M & L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area |
| 3 | M&L for cement concrete Type B2 1:4:8 (40mm graded aggregates) in foundations, filling and mass, complete all as specified. |
| 4 | M & L for Flat Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified. |
| 5 | M & L for cement concrete of M-30 grade (20mm graded aggregates) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified. |
| 6 | M & L for flat square Formwork to rough concrete surfaces sides of pillars, posts, struts, piers, columns and stanchions , complete all as specified. |
| 7 | M & L for cement concrete of M-30 grade (20mm graded aggregates) for Columns, pillars, piers, posts and struts, complete all as specified. |
| 8 | M & L for flat Formwork to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter , complete all as specified. |
| 9 | M & L for RCC type B1 1;2:4 12.5 mm thk Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like, complete all as specified. |
| 10 | M & L for Flat Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping, complete all as specified. |
| 11 | M & L for cement concrete of M-30 grade (20mm graded aggregates) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified. |
| 12 | M&L for flat formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete. |
| 13 | M&L for RCC design mix M-25 (20mm graded aggregate) in chajjas etc. |
| 14 | M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified. |
| 15 | M & L for Mild steel TMT bars 6mm to 8mm diaTMT bars cut to legth, bent to shape required including cranking bending spirally for hooping for slab for manhole etc complete all as directed. |
| 16 | M & L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified. |
| 17 | M&L for brick work with flyash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed. |
| 18 | M&L for brickwork with flyash bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4). |
| 19 | M&L Rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement. all as specified and directed. |
| 20 | M & L for Rendering work 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified. |
| 21 | M & L for Rendering work 05mm thick on fair faces of brick work or concrete surfaces (Celling) in cement mortar 1:3, rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified. |
| 22 | M & L for Rendering work 05mm thick on fair faces of brick work or concrete surfaces (wall) in cement mortar 1:3, rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified. |
| 23 | Supply only integral water proofing compound. |
| 24 | M & L prepaeation newly plastered of wall surfaces and applying two coats of acrylic smooth exterior paint of required shade (applied @ 1.67ltr/10 Sqm) over and including priming coat of exterior primer @2.20 Kg/10 Sqm) all as specified . |
| 25 | M & L for Preparing newly surfaces plastered or un plastered celling and applying three coat of white wash, complete all as specified. |
| 26 | M & L prepation of newly plastered wall surfaces and applying two coats of distemper oil-emulsion over a coat of primer on wall on wall all as specified and as directed . |
| 27 | M & L for Hardcore of gauge n exc. 63 mm, broken stone or boulder deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified. |
| 28 | M&L for plain cement concrete 100 mm thick of 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in levelling course of sub floors, sub-base, floors and paving etc., complete all as specified and directed. |
| 29 | M&L for Screed bed or bedding layer of mortor 20 mm thick in CM 1:4 for laying floor finishes all as specified and directed. |
| 30 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete,all and as directed. |
| 31 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 13014 |
| 32 | M & L for Non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but n. exceeding 0.11 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed by Engr-in-charge.. |
| 33 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 as in backing coat of skirting /dado all as specified and directed. |
| 34 | M & L Glazed coloured ceramic tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed by Engr-in-charge.. |
| 35 | S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suplying and fixing in opening as per specification and drawing etc complete all as specified and as directed by Engineer- in-Charge. |
| 36 | S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rial, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement , suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed by Engineer-in-Charge. |
| 37 | S&F 75 mm long butt hinges, type C-22 extruded aluminium anodised with brass hinge pin, anodised and fixed and all as specified and directed |
| 38 | S&F 100mm long Aluminium anodised barrel towers bolts of extruded section and all as specified and directed |
| 39 | S&F 100mm extruded aluminium alloy handles, fabricated type anodised as specified and directed |
| 40 | M&L for 1st class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed. |
| 41 | S&F 40mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and both faces are covered with decorative face veneer with lipping/frame to match |
| 42 | S&F 100mm long butt hinges, type C-22 extruded aluminium anodised with brass hinge pin, anodised and fixed and all as specified and directed complete and all as specified and directed. |
| 43 | S&F 150mm long Aluminium anodised barrel towers bolts of extruded section and all as specified and directed |
| 44 | S&F 150mm extruded aluminium alloy handles, fabricated type anodised as specified and directed |
| 45 | M & L for Steel windows for industrial buildings with centre hung shutters including brass pivots, catch spring and pulley wheel , complete all as specified. |
| 46 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white including seat cover and flush pipe fixing to existing 125/110mm size PVC (SWR) P trap etc complete all as specified and as directed by Engineer-in-Charge. |
| 47 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 Ltrs capacity , low level , white, with inlet , ball valve, float and handle including brackets and flush pipe etc complete all as specified and as direted by Engineer-in-Charge. |
| 48 | Health faucet (ABS Body) mild steel chromium plated suitable for 20 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 49 | S&F two way Bib taps, brass chromium plated fancy type with wall flange screwed down, screwed for iron pipe or for brass ferrule and fixed for 20mm bore. Make : Parryware . Model No :G5834A1 or equivalent including taking down of existing one complete all as per specified. |
| 50 | S&F in repair Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets excluding ditto but including brackets and complete all as specified. |
| 51 | S&F in repair Waste coupling of 32mm PTMT(half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms), complete all as specified and directed. |
| 52 | S&F in repairs Bib taps, brass chromium plated fancy type with cruch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore. |
| 53 | S&F in repairs Pillar taps fancy type cast copper alloy, with capstain head, chromium plated screwed down high pressure, with long shanks and fly nuts screwed for iron pipe and fixed 20 mm bore. |
| 54 | S&F 600mm x 450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 55 | S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm |
| 56 | S&F in repairs chromium plated fency type stop valves, cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 20 mm size. |
| 57 | S&F brass cromium plated towel Tubular towel rail, 20mm dia, D type, 60cm long between flanges including taking down of existing one complete all as per specified . |
| 58 | S & F for Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (including flush pipe and waste pipe) with Vitreous china urinal partition white of size 310x700 mm and Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms). complete all as specified and directed. |
| 59 | S&F Unplasticised PVC of 20mm dia pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type, complete all as specified. |
| 60 | S&F Unplasticised PVC of 25mm dia pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type, complete all as specified. |
| 61 | S&F in repair for PVC (SWR) multi floor trap of 75mm dia with grating including jointing with solvent cement etc complete,all as specified and directed. |
| 62 | S & F in repair PVC (SWR) pipe 110mm dia single sockted in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 63 | S&F in repair PVC (SWR) bends 110mm radius complete all as specified and directed. |
| 64 | S & F in repair PVC (SWR) pipe 75 mm dia single sockted in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 65 | S&F in repair PVC (SWR) bends 75mm radius complete all as specified and directed. |
| 66 | S&F 110 mm bore PVC (SWR) vent cowl |
| 67 | S&F 75 mm bore PVC (SWR) vent cowl |
| 68 | S&F moulded polyethylene 1000 ltr water tank storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-charge. |
| 69 | S&F in repairs 25 mm Ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 70 | Concrete bed to 150 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, in PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregates. |
| 71 | S&F Reinforced conctrete 150mm bore of pipes class NP2, laid and jointed complete with collars all as specified and directed. |
| 72 | M&L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping complete all as specified and directed. |
| 73 | M&L for Providing Precast Reinforced cement concrete 1:2:4 type B-I (using 20mm graded crushed stone aggregate) as in manhole covers, set in cement mortar 1;4 including necessary form work and moulds complete all as specified and as directed. (Note: Steel reinforcement shall be measured and paid for separately under respective item.) complete all as specified. |
| 74 | M&L framed work such as grills ,grating etc with ends of bars shouldered or riveted, or forged into spikes conforming to Fe 290-Gde -E-165. |
| 75 | M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 76 | M & L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area → |
| 77 | M&L 75mm thick cement concrete type C-2 , 1:3:6 (using 40mm graded stone aggregate as in plinth protection in alternative bay and surface finish even and smooth with out using extra cement complete all specified and directed. |
| 78 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 79 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all specified and directed. |
| 80 | M&L for Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all specified and directed. |
| 81 | Supply and laying PVC non metalic conduit including tees, bends, elbows, reducers, and fixing accessaries etc for telephone/TV connection of size 20 mm dia all as directed Note (i) TV/Telephone cable provide by user section . |
| 82 | Supply and fixing PVC non metalic junction boxes one to four way for telephone/TV connection of size 20 mm dia all as directed |
| 83 | M&L for concealed Point wiring one light/bell point controlled by one, one way switch complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. Note : Cutting chases will be Measured and paid seperately. |
| 84 | All as per item No 83 herein before but one ceiling/exhaust fan point controlled by one, one way switch. |
| 85 | All as per item No 83 herein before but one 05 Amps socket outlet point on same board. |
| 86 | All as per item No 83 herein before but one switch socket outlet point 5 Amps on independent board. |
| 87 | All as per item No. 83 here-in-before but with copper conductor cable FRLS, 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board. |
| 88 | All as per item no 83 above but copper conductor FRLS 4 Sq mm |
| 89 | S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed. |
| 90 | S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed. |
| 91 | S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed. |
| 92 | S&F socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and as directed. |
| 93 | Supply and fixing LED lights fitting 1 x 18/ 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 94 | Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet 10 watt 220 V AC decorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size complete. |
| 95 | Supply and fixing LED flood light fitting 200 watts 230 volts AC out door type with thermal management in multiple optics and supplied with IP 65 protection with impack and corrosion resistent complete with driver and lamp all as directed. |
| 96 | Supply and fixing LED street light fitting 60/70 watt 230 V AC outdoort type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including necessary mounting bracket with nut bolts and mounting on wall or roof etc including taking down unserviceable fitting all as directed. |
| 97 | Supply and fix exhaust/ventilating fans made of sturdy engineering plastic complete with louvers shuter voltage 230 volts, 50 Hz RPM 1200 copper winding of sweep 250/300 mm all as directed |
| 98 | Supply and fixing ceiling fans complete with blades, down rods electronic modular regulator two module and accessories 230 volts 1200 mm sweep minimum air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) all as directed |
| 99 | Supply and fix MCB DB, SPN, 8 ways, double door, 240 volt, Isolated neutral bar with IP 43 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete. Make: L&T/Legrand/ Havells |
| 100 | Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, \\"B\\" Curve complete. Make: L&T/Legrand/ Havells |
| 101 | Supply and fixing SPN 32 Amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) complete. Make: L&T/Legrand/ Havells |
| 102 | M&L for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 2.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 2.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etc from Main DB to MCB DB all as specified and as directed by engr - in- charge. Note :- (i) 2 runs of 2.5 sqmm, + 1 run of 2.5 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length. (ii) Electric hooter and starter provided by user section |
| 103 | Supply and fix ceiling rose three terminals phase PVC/polycorbonate isolated body all as directed. |
| 104 | Supply and fix modular telphone socket RJ 11 one module including taking down unserviceable socket all as directed |
| 105 | M & L for earthing complete with GI earth plate electrode 600 x 600 x 6.3 mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to GI earth lead 4 mm wire by means of bolts, nuts, check nuts/bracing and washers all as shown in electrical plate No. 3 of SSR Part-I and including necessary excavation and earth work in any type of soil, removal and refilling of soil and funnel with wire mesh and GI watering pipe 20mm dia, Chamber in PCC 1:3:6, type C1 using 20mm graded stone aggregate and 40mm thick cover in RCC 1:2:4, type B1 using 20mm graded stone aggregate and reinforced with 8mm dia TMT bars at 150mm c/c on both ways, with flush type handle with 16mm dia round bars and 15 mm dia GI pipe upto 7.5m for protection and connected to earthing test point all as specified or indicated including testing on completion. |
| 106 | Supplyng and laying of XLPE insulated armoured heavey duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 sq mm 2 core all as directed. |
| 107 | Excavation in trenches not exceeding 1.5 m wide and n.exc 1.5 m deth for foundation etc of for shafts,wells, cesspits, manholes, pier holes, etc not exc 10 sq mtr on plan and not exc 1.5 mtr in depth and getting out soft/loose soil for laying of pipes complete all as specified and directed. |
| 108 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 CM thick for soft/loose soil complete all as specified and directed. |
| 109 | Removing excavated materials (soils) to a distance not exc 50m and depositing where directed at a level not exc1.5 m above the starting point all as specified and as directed. |
| 110 | Earth cushioning to UG cables using excavated soil riddled by using large sieve to separate the composite particles/roots etc and refilling in trenches all as specified and as directed. Note: Punned thickness will be measured for payment. |
| 111 | Supply and lay common burnt old size bricks sub-class 'B' designation 75 for cable protection all as specified and as directed. |
| 112 | Supply and laying tubes light grade galvanised with all fittings laid in trenches of dia 50 mm all as directed for cable protection |
| 113 | M&L for dismantling / cutting of existing road / path / hard standing cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) suitable for laying cable protection pipe 80 / 50 mm dia under the road / path / hard standing complete. |
| 114 | Material and labour for cement concrete in foundations, filling and mass conrete type B 2 (1:2:4) (using 40 mm graded crushed stone aggregate) for making good the disturbed surface of road/path/hard standing by using cement contrete mortar 1:2:4 type B2, using 40 mm graded stone aggregate 0.45 mtr wide and 0.15 mtr thick complete all as specified and directed. Note (i) Removing the debris from site complete deemed to be included in quated rate |
| 115 | Supplyng and laying of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches complete of size 32 mm outer dia all as directed. |
| 116 | Material and labour for cutting of existing steel water tubing for additions or alterations in GI pipe of size 40 to 50 mm dia and fix the CPVC pipe with existing pipe line all as directed |
| 117 | Supply and fix ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of size 20 mm dia (Minimum weight of 20 mm - 210 grams) all as directed |
| 118 | Supply and fix ball valves high pressure screwed/fixed in both ends of iron /CPVC pipes of size 25 mm all as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender