Tender For Supply And Construction Of Cook House With Ug Bunker
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Dec 2026
13 days left
EMD
1.16 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Construction Of Cook House With Ug Bunker
BOQ
| Sl. No. | Item Description |
| 1 | DINING HALL |
| 2 | Supply and Construction of Dining Hall of size (19.53 M x 6.10 M WITH 1.50 M WIDE VERANDAH) made up of PIR (Polyisocynerate) Wall Panels of 60 mm thick (Make : Lloyd/Jindal/ ACE/Modern Pre Fab) with both inner and outer sheet of the panel made of GI Metal plain sheet. Inner plain sheet with slight ribs. Inner and Outer sheets to be of 240 MPa GI with 180 GSM Zn coating/ 300 MPa galvalume steel with 150 GSM Alu-Zn Coating of dining hall of size 11.82 x 6.1 m (from RHS Columns to bk wall of cook house as per drg) and 3.00 m clear headroom and all as per technical specification attached. Plan and elevation of the shelter is as per drawing attached. |
| 3 | Fly Ash Bricks of size 230 x 115 x 75 mm with frog size 110 x 40 x 10-20 mm having min compressive Str 75 Kg/cm2 and conforming to IS 12894 of 2002. |
| 4 | Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 (Make: AMBUJA / BIRLA/ ULTRATECH/ SHREE). |
| 5 | Sand conforming to IS-383-1970. The sand shall be hard, dense, strong, durable, clear and free from veins, adherent coatings, disintegrated pieces, alkali, vegetable matters and other deleterious substances. |
| 6 | Fine Sand conforming to IS-383-1970. |
| 7 | Graded Stone Aggregate of size 40-63mm conforming to IS-383-1970. |
| 8 | Graded Stone Aggregate of size 40mm conforming to IS-383-1970. |
| 9 | Graded Stone Aggregate of size 20mm conforming to IS-383-1971. |
| 10 | Graded Stone Aggregate of size 12.5 mm conforming to IS-383-1972. |
| 11 | Thinner of Make : Shalimar/ Asian/Johnson & Nicholson/Berger/Goodlas Nerolac. |
| 12 | Water proofing compound packed in one Kg packet. Make : Seeko / Pidilite / Fosroc. |
| 13 | Red oxide (Zinc Chromate) Make : Shalimar/ Asian/Jenson and Nicholson/Berger/Goodlas Nerolac. |
| 14 | Synthetic Enamel Paint Make : Shalimar/ Asian/Jenson and Nicholson/Berger/Goodlas Nerolac. |
| 15 | Welding Rod. |
| 16 | OBD Primer White Make: Shalimar/ Asian/Jenson and Nicholson/Berger/Goodlas Nerolac. |
| 17 | Oil Bound distemper (Make: Shalimar/ Asian/Jenson and Nicholson/Berger/Goodlas Nerolac. |
| 18 | Primer for Cement based paint Make Snocem Bombay/ Berger/ Asian Paints/ Durocem/Shalimer. |
| 19 | Cement based paint Make: Acrocem / Snowcem / Dorocem. |
| 20 | White Cement (Make: JK / Birla ). |
| 21 | Tor Steel 12 mm dia conforming to IS 2062-1999 Make : SAIL/TISCO/RINL |
| 22 | Tor Steel 8 mm dia conforming to IS 2062-1999 Make : SAIL/TISCO/RINL |
| 23 | MS Binding wire 0.9 mm dia (annealed). |
| 24 | 7-8 mm thick Glazed Ceramic tiles 300 x 200 mm Make Johnson/Kajaria/Orient/Somany. |
| 25 | Pre polished Kota stone 20-25 mm thick of size 550 x 550 mm. |
| 26 | Pre polished Kota Stone 20-25 mm thick of size 1000 x 300 mm for steps. |
| 27 | Granite Stone 18-20 mm thick of size 1000 x 150 mm for steps riser. |
| 28 | Granite Stone 18-20 mm thick of size 1000 x 600 mm as in slabs. |
| 29 | Nails various sizes. |
| 30 | Fevicol. |
| 31 | Commercial plywood 8 mm thick (1.2m x2.4 m) ISI Marked. |
| 32 | Wooden scantling 50 x 75 x 2400 mm long. |
| 33 | LED Tube light 4' long 20 Watt cool day light, Make Philips/Crompton Greaves/GEC/Wipro/Bajaj/ Havells/Asian. |
| 34 | Ceiling fan 1200 mm sweep complete with electronic dimmer 450 W Make Crompton Greaves /Usha/ Bajaj/Orient/Havells/GEC/Khaitan. |
| 35 | Hook for hanging ceiling fan. |
| 36 | Bulk head fitting complete with glass and LED 09 Watt Make : Bajaj/Crompton/Havells/Philips/Wipro. |
| 37 | Ceiling rose 2 to 3 terminal Make: Havells/Bajaj/Asian. |
| 38 | Switch modular type 5 Amps Make: Roma/ Anchor/ Legrand/C&S/ Bentec/ Seimens/ Philips/Indo Asian. |
| 39 | 5 Pin 15 Amps switch socket combination with PVC mounting box Make:Havells/Anchor/ SSK/CONA. |
| 40 | 5 Pin 5 Amps switch socket combination with PVC mounting box Make- Havells/Anchor/ SSK/CONA. |
| 41 | MCB DB SPN 12 way Make Legrand/ABB/L&T/C&S/Anchor/Schneider/ Havells/ GEC/ Bentec/ Crompton. |
| 42 | MCB SPN 63 Amps conforming to IS 8828-1996 Make Havells/ L&T/Indokupp/Standard/Anchor. |
| 43 | Miniature circuit breaker (MCB) 6 Amp to 32 Amps (single pole) Make Havells/ L&T/Indokupp/ Standard/Asian. |
| 44 | MCB DB 3 phase 32 Amp TPN wih bus bar (size 30 x 45 x 20 cm approx). |
| 45 | PVC modular switch mounting box 8 way with cover plate and one dummy swith Make- Havells/Bajaj/Asian. |
| 46 | PVC modular switch mounting box 4 way with cover plate and one dummy swith Make- Havells/Bajaj/Asian. |
| 47 | PVC modular switch mounting box 2 way with cover plate and one dummy swith Make- Havells/Bajaj/Asian. |
| 48 | Wire PVC insulated cable 1 sqmm multistranded Copper conductor single core 1100V, grade conforming to IS 694/1990 a roll of 90 m long of Make: Havells/ Paragon/ Finolex/Plaza/Nicco/Polycab/Anchor/Gloster/Panasonic. |
| 49 | Wire PVC insulated cable 1.5 sqmm multistranded Copper conductor single core 1100V, grade conforming to IS 694/1990 a roll of 90 m long of Make: Havells/ Paragon/ Finolex/Plaza/Nicco/Polycab/Anchor/Gloster/Panasonic. |
| 50 | Wire PVC insulated cable 2.5 sqmm multistranded Copper conductor single core 1100V, grade conforming to IS 694/1990 a roll of 90m long of Make: Havells/ Paragon/ Finolex/Plaza/Nicco/Polycab/Anchor/Gloster/Panasonic. |
| 51 | Cable flexible twisted copper conductor PVC insulated 1100v of size 23/0.0076. |
| 52 | PVC casing capping 25 mm size Make Precision/Supreme/ Asian/Madi/ National/ Plaza/Aristoplast. |
| 53 | PVC casing capping 32 mm size Make Precision/Supreme/ Asian/Madi/ National/ Plaza/Aristoplast. |
| 54 | PVC Tee 32 mm casing caping Make Precision/Supreme/ Asian/Madi/ National/ Plaza/Aristoplast. |
| 55 | PVC Tee 25 mm casing caping Make Precision/Supreme/ Asian/Madi/ National/ Plaza/Aristoplast. |
| 56 | PVC Bend 32 mm Casing Caping make Precision/Supreme/ Asian/Madi/ National/ Plaza/Aristoplast. |
| 57 | PVC Bend 25 mm Casing Caping make Precision/Supreme/ Asian/Madi/ National/ Plaza/Aristoplast. |
| 58 | PVC Junction box 3 way 32 mm Make Precision/Supreme/ Asian/Madi/ National/ Plaza/Aristoplast. |
| 59 | PVC Junction box 4 way 32 mm Make Precision/Supreme/ Asian/Madi/ National/ Plaza/Aristoplast. |
| 60 | PVC Junction box 3 way 25 mm Make Precision/Supreme/ Asian/Madi/ National/ Plaza/Aristoplast. |
| 61 | PVC Junction box 4 way 25 mm Make Precision/Supreme/ Asian/Madi/ National/ Plaza/Aristoplast. |
| 62 | Tape insulation 10 m roll Make Steel grip/Anchor grip. |
| 63 | GI earthing plate 600 x 600 x 6 mm thick with 10 mm dia, 25 mm long 02 Nos nut & bolts. |
| 64 | Common Salt. |
| 65 | Charcoal. |
| 66 | GI wire 4 mm (8 SWG). |
| 67 | CI cover 5 mm thick (300 x 300mm size) hinged to CI frame. |
| 68 | GI funnel with wire mesh. |
| 69 | Rawl plug (Pkt of 100 Nos). |
| 70 | AI strip 25 x 3 mm. |
| 71 | GI strip 25 x 3 mm. |
| 72 | Star Screw Steel Full threaded 25 mm (Pkt of 100 Nos). |
| 73 | Star Screw Steel Full threaded 40 mm (Pkt of 100 Nos). |
| 74 | PVC box of size 4\\" x 4\\" for mounting ceiling rose/ pendent holder. |
| 75 | PVC conduit pipe 20 mm dia. |
| 76 | Flexible conduit 20mm dia. |
| 77 | Conduit clips. |
| 78 | Cooler stand 800 x 800 x 750 mm (avg height) made out of 25 mm Square Pipe 2 mm thick reqd ht at site, with min two horizontal supports in between the frame. |
| 79 | Heavy Duty cooler Body made of 22 Gauge PGI sheet duly spray painted with following specifications:- (a) Motor of IS specification (Make Khaitan/ORISON/ Voltas/Crompton/Bajaj) (b) Sweep -500mm (c) Size- 4000 M3/HR (d) Pump with 1340 RPM, 1/70 HP for min head of 1.5mt of 40 watts for 220-240 volts of capacity 7.5 ltrs per min. |
| 80 | Heavy duty Exhaust fan 450 mm sweep with louvers (Make Crompton/Bajaj/ Usha ) incl fixing arrangements with gable ends over ceiling level. |
| 81 | GI Pipe 20 mm dia 5' Long Light grade with 4 Nos MS Clamp Make Jindal /TATA / Prakash / Swastik. |
| 82 | GI Pipe 50 mm dia 5' Long medium grade Make Jindal /TATA / Prakash / Swastik. |
| 83 | Insect killer electric grill box type 4x 20 watt tube rod, ISI Marked including hanging arrangement complete. |
| 84 | Supply and install of electrical operated, single phase, waer storage heater (Geyser) of capacity 25 ltr having copper inner tank complete inlet and out let water connecion slot with 600mm long PVC pipe with PTMT nut and provision of safety devise etc. alogwith 3 mtr long 3 core copper cable with plug top 15 amp, AC 230 Volt complete - 01 Nos Make USHA/Racold. |
| 85 | Wind driven Turbo Air Ventilator of 21” dia made up of stainless steel body shall be provided on the top of roof in each shelter. Outer dia of the Turbine ventilator, throatal dia & overhall height shall be 30”, 24” and is 17” respectively. The turbine ventilator shall be operated by automatic wind power driven. The ventilator fitted with Nylon made Typhonic bearing & high sensitive roller bearing system. Make : Shreeji / Maxxair Jumbo. |
| 86 | Cable PVC insulated aluminium solid conducter served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq mm and 3 core for working voltage 1100 volts conforming to IS 7098 (part I/IS 1554 (Part I) Make Havells/ Standard/ Polycab. |
| 87 | Cable XLPE insulated PVC sheathed heavy duty armoured (CG Cable) 25 sq mm 04 core aluminium conductor for working voltage conforming to IS 7098 (part I/IS 1554 (Part I) Make : Havells/ Polycab/ Finolex. |
| 88 | Feeder piller box out door cubical type factory made vermin protected dust proof water proof made out of MS sheet 1.6 mm thick and 50x50x6 mm thick angle iron base freme having insulated bus bar aluminium 300 Amps cap 3 phase 200 Amp for neutral with openable shutters and locking arragements incl painting with two coats of synthetic enamel paint over a coat of red oxide (internally & extranally ) complete and connection cable with lugs to be mounted on PCC platform. |
| 89 | GI pipe 110 mm dia (length 20') (Make Kishan/Prince/Supreme). |
| 90 | GI Socket 110 mm dia (Make kishan/Prince/Supreme). |
| 91 | GI door bend 110 mm dia (Make kishan/Prince/Supreme). |
| 92 | GI Tee 110 mm dia (Make kishan/Prince/Supreme). |
| 93 | GI adhesive (100 gm tube) . |
| 94 | Floor trap GI 110 mm size with CP grating (Make Prayag/Sudhakar/Polytuff). |
| 95 | Float valve GI 25 mm dia complete with HDPE Ball. |
| 96 | Angle Stop cock (CP ) Brass 15mm ( Make Prayag / Parko / Jaquar/Plumber/Kohler/Cera). |
| 97 | CP bib cock 15 mm ( Make Prayag / Parko / Jaquar/Plumber/Kohler/Cera). |
| 98 | GI Pipe 15 mm dia medium grade (Make : Tata / Jindal / Zenith/Swastik/Prakash/Cera). |
| 99 | PVC water storage tank of capacity 2000 Ltrs, ISI marked (Make:Sintex/ Supreme / Polycon/Rotex). |
| 100 | GI Tee 15 mm medium grad (Make : Tata / Jindal / Zenith/Swastik/Prakash). |
| 101 | GI Elbow 15 mm medium grade (Make : Tata / Jindal / Zenith/Swastik/Prakash). |
| 102 | GI Union 15 mm medium grade (Make : Tata / Jindal / Zenith/Swastik/Prakash). |
| 103 | GI Socket 15 mm medium grade (Make : Tata / Jindal / Zenith/Swastik/Prakash). |
| 104 | Cotton thread. |
| 105 | White lead(safeda) 200gm packed in a container. |
| 106 | Tank Connector 25 mm dia GI (Make : Tata / Jindal / Zenith/Swastik/Prakash). |
| 107 | GI Pipe 25 mm dia medium grade (Make :Tata / Jindal / Zenith/Swastik/Prakash). |
| 108 | Brass Gate Valve 25 mm dia heavy duty wheel type Make : Zoloto / Leader / Upadhay. |
| 109 | GI Tee 25 mm (Medium grade) (Make : Tata / Jindal / Zenith/Swastik/Prakash). |
| 110 | GI reducer socket 25/15mm (Make : Tata / Jindal / Zenith/Swastik/Prakash). |
| 111 | GI Socket 25 mm (Make : Tata / Jindal / Zenith/Swastik/Prakash). |
| 112 | GI elbow 25 mm (Make : Tata / Jindal / Zenith/Swastik/Prakash). |
| 113 | GI extension nipple 150 mm long , 15 mm dia. |
| 114 | GI extension nipple 75 mm long , 15 mm dia pipe. |
| 115 | GI Union 25 mm (Medium grade) (Make : Tata / Jindal / Zenith/Swastik/Prakash). |
| 116 | Pedestal type WHB (Vitreous chine white) size 550 x400mm flat back with CP coupling 32 mm dia, CP Pillar cock, waste pipe 900 mm long with CP coupling and brackets for fastening complete Make:Hindware/Parryware/Cera/Jaquar/H2O/Kohler/Cera). |
| 117 | Looking mirror of Size 1200 x 600 x 6 mm thick bevelled edge mirror selected quality glass mounted on 6 mm th AC Bldg Bd or commercial ply wood and fixed to wdn plug with CP brass screw and cup washers. Make : Atul / Modi / Saint Gobin/Equivalent. |
| 118 | Stainless steel sink 1 mm thick of vverall size 915 x 460 mm and bowl size 410 x 330 x 160 mm with drainage board alongwith 40 mm dia waste coupling and waste pipe and 02 Nos brackets etc complete fittings of Make: Prayag / Nirali/Jayant / Silvershine (glossy finish). |
| 119 | Stainless steel Kitchen Rack of size 36\\" x 39\\" x 1 mm thick Make: Prayag / Nirali/Jayant / Silvershine. |
| 120 | CP Towel rail 600 mm long with CP brass screws and bracket. |
| 121 | CP soap case. |
| 122 | UPVC pipe 25 mm bore incl all fitting Tee, bends, elbow/union/sockets etc Make Supreme/Finolex/Asirwad. |
| 123 | Air termination single pointed aluminium rod 12 mm dia and 300 mm long. |
| 124 | Testing point terminal block make of gun metal & phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw. |
| 125 | Aluminium strips 25 x 3.0 mm. |
| 126 | Galvanized Iron strip 32 x 6 mm. |
| 127 | Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long. Pipe (Make : Tata / Jindal / Zenith / Swastik /Prakash). |
| 128 | Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings, drilled with 2 Nos holes for 6 mm dia near one side. |
| 129 | CI earth pit cover of size 300 x 300 x 6 mm with Angle iron of size 20x20mm, 3 mm thick with MS frame. |
| 130 | Charcoal. |
| 131 | Salt normal. |
| 132 | Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt (Make:-Presto/ Polycab/ Finolex). |
| 133 | Dining table of size of 1800mm x 900mm x760mm made of 65mm x 50mmx 641mm 1st class hard teak wood rectangular legs, top runner size 100mm x50mm, Top of the table shall be of 19 mm thick prelaminated MDF Board exterior grade of approved make with PVC beading all around, All wood surfaces shall be polished with high class french polish till glossy finish.Hard Nylone Buffer/Toes shall be provided to the legs of the table complete all as specified/Drg. Make/Manufacturer: Vidya MDF/IGodrej Interio/Featherlite/Durian). |
| 134 | Dining Chair: Over all size of chair (Lxdxh) 450x450x900mm,The seat and back rest shall be PVC sheet having holes(Net). Frame shall be made of first class seasoned teak wood free from knots, All joints and fixing shall be done in accordance with standard workmanship and specifications. All wooden surface shall be french polished with high class french polish all as specified shape and size complete all as specified /Drg and directed. Make: RK Empire/Godrej/Neelkamal/Durian. |
| 135 | Almirah Steel large. Steel Almirah large steel of size 910mm x 490mm x1900 mm, it shall be 1.25 mm thick MS sheet confirming to relevant IS with four shelves with fastening arrangement (removable). The front corner shall be rounded off. Handle shall be steel chromium plated fitted with lock having three way locking device, grade-II quality, brass body, 75 mm size( Make Harison/Godrej/Supreme / Neelkamal. |
| 136 | Steel Rack. Steel rack shall be of 4 Nos shelves/tier size 1800mm x 1200mm x 600mm consisting pf 600mm wide rack will be covered with 2mm thick MS sheet welded in square pipe frame size 40mm x 40mm x 2.9mm thick will be welded at bottom of leg square section, finishing with powder coated colour. 04 Nos Stainless steel buffer welding with legs complete all as per directed and specified/Drg. Make: Lakshi/Neelkamal/Supreme. |
| 137 | Steel Bench. Over all size of bench (LxDxH) 1830mm x 660mm x 830mm Steel Bench Stainless Steel 3 Seater Silver colour, it is high quality mild steel powder coated. Its arms and legs are made of chrome plated mild steel to give a good look. The product is durable, rustproof and comfortable to sit. The beam is provided at the center of the product to distribute the weight equally and as per drg.Make : Neelkamal/ MCS steel/Godrej/Featherlite/Durian). |
| 138 | Fire Extinguisher 3 kg capacity with mounting brackets. Make: Minimax/Omax/equivalent. |
| 139 | Fire ball extinguisher 150 mm dia weight not less than 1.3 kg Make: Minimax/Omax/Equivalent |
| 140 | Hot rolled equal angle 75 x 75x 5mm thick for vertical members of length 5.55m Make:- Tata/Jindal/Rinl/Sail |
| 141 | Hot rolled equal angle 65x65x5mm thick for horizontal members of length 1.5m each Make: Tata/Jindal/Rinl/Sail |
| 142 | Hot rolled equal angle 65x65x5mm thick for bracing members of length 2.34m each Make: Tata/Jindal/Rinl/Sail. |
| 143 | 20 mm dia foundation bolts of length 0.5m with nuts. |
| 144 | Mild steel plate 400x 400x 10mm thick with 16mm dia 600mm long fixing bolts etc. Make: Tata/Jindal/Rinl/Sail |
| 145 | MS SHS 45x45x4.5mm and flat iron 50x 5mm thick for tank staging Make: Tata/Jindal/Rinl/Sail. |
| 146 | MS flat iron 50x5mm thick for tank holding Make: Tata/Jindal/Rinl/Sail. |
| 147 | Cement Bags OPC 43 grade confirming to IS-8112 packed in HDPE Bag of 50 Kg each confirming to IS-11652/2000 Make : AMBUJA/ BIRLA/ ULTRATECH. |
| 148 | Sand fine/coarse conforming to IS-383-1970. The sand shall be hard, dense strong, durable, clear and free from veins, adherent coatings, disintegrated pieces, alkali, vegetable matters and other deleterious substances. Source of materials- Chandigarh/Pathankot. |
| 149 | Graded Stone Aggregate size 40-63mm conforming to IS-383-1970 (Hard core) source of materials- Chandigarh/ Pathankot. |
| 150 | Graded Stone Aggregate size 40mm conforming to IS-383-1970 source of materials- Chandigarh/ Pathankot. |
| 151 | Graded Stone Aggregate size 20mm conforming to IS-383-1970 source of materials- Chandigarh/ Pathankot. |
| 152 | Fly Ash Bricks of size 230 x 115 x 75 mm with frog size 110 x 40 x 10-20 mm having min compressive Str 75 Kg/cm2 and conforming to IS 12894 of 2002. |
| 153 | Coarse Sand (Sand should be free from silt, clay and organic mtrls). |
| 154 | Fine Sand. |
| 155 | Aggregate 20 mm graded (Aggregate shall be as per IS 383-1970 hard, strong, dense, durable, clean and free from veins, adherent coating, disintegrated, flaky and elongated pieces alkali, veratable matter and other substances). |
| 156 | Aggregate 40 mm graded (Aggregate shall be as per IS 383-1970 hard, strong, dense, durable, clean and free from veins, adherent coating, disintegrated, flaky and elongated pieces alkali, veratable matter and other substances). |
| 157 | Aggregate 40-63 mm graded (Aggregate shall be as per IS 383-1970 hard, strong, dense, durable, clean and free from veins, adherent coating, disintegrated, flaky and elongated pieces alkali, veratable matter and other substances). |
| 158 | Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 (Make: AMBUJA/ BIRLA/ ULTRATECH/ SHREE). |
| 159 | Tor Steel 10 mm dia conforming to IS 2062-1999 Make : SAIL/TISCO/RINL/Kamadhenu TMT. |
| 160 | 0.9 mm dia mild steel binding/tying wire annealed. |
| 161 | Commercial plywood 8 mm thick (1.2 x2.4 m) ISI Marked. |
| 162 | Wooden scantling 50 x 75 x 2400 mm long. |
| 163 | Nails various sizes. |
| 164 | Brick Bats. |
| 165 | UG COOKING FACILITY |
| 166 | Supply & constrction of Pre fababricated M-50 grade RCC culverts of size 2.5m x 2.5m x 1.5m |
| 167 | Exavation of size 14.0M x 3.5M x 3.5M for placing of culvert |
| 168 | Returning,filling in including spreading , levelling,watering and well ramming in layers not exc 25 cm.complete all as specified and directed. |
| 169 | Cement Bags OPC-53 grade conforming to IS -8112-1989 packed in HDPE Bag of 50 Kg each confirming to IS-11652/2000 (Make : Ambuja I Birla I Ultratech I ACC). |
| 170 | Sand conforming to IS-383-1970. The sand shall be hard, dense, strong, durable, clear and free from veins, adherent coatings, disintegrated pieces, alkali, vegetable matters and other deleterious substances. |
| 171 | Graded Stone Aggregate of size n exc 63mm conforming to IS383-1970 (Hard core) |
| 172 | Graded Stone Aggregate of size 20mm conforming to IS-3831970 |
| 173 | Closing of back side of culvert with precast RCC slab of size 2.9m x 2.94m x 0.20 m with reinforcement of TMT Grade 550 D. Reinforcement provided in the slab is must be atleast 88.9 Kgs/m3. The back wall be designed to have plug side and socket to fixing as per reqmt. |
| 174 | Fabrication for closing of front side of culvert with steel frame and MS plate as per specified as below: -(a) Min Size- 2.90 mtr x 2.94 mtr(b) All around frame - Equal angle 50 x 50 x 5 mm. (i) For vertical angle -- 02 Nos with the length of 2.50 mtr of size Equal angle 50 x 50 x 5 mm. (ii) For horizontal angle - 02 Nos with the length of 2.50 mtr 02 Nos with the length of 0.85 mtr of size Equal angle 50 x 50 x 5 mm(c) MS Plate — 3 mm thick MS plate of size 2.5 mtr x 2.5 mtr.(d) Fixing - Fixing - Fixed with self drilled fastener of 8 mm dia and 50mm length (Nos-08)(e) All iron should be pre painted Door. Supply of pre painted Steel doors of size 0.85 x 2.00 m with angle iron frame (50x50x5mm) with two cleats welded to the Frame as door stopper. Leaf will be consisting of not less than three panels (frame made of angle iron 25 x 25 x 5mm withl .25mm thick MS sheet covering Including 1 Nos MS sliding door bolt 300mm, two Nos -Tower bolt 200mm , three Nos - MS hinge 125mm size , two Nos -125mm Handle fabricated out of 25 x 6mm thick flat iron,four Nos - 40mm x 6mm of 300 mm long hold fast of Fl made to shape, complete with two coats of synthetic enamel plaint over a coat of red oxide. The cost to incl all type of fabrication and erection. Make of sturctural members are SAIL/TATA/RINL/JINDAL |
| 175 | PVC casing capping 20 mm size Make: Polyplast/ BeraIia /Power/Shakti |
| 176 | 20mm dia PVC conduit pipe med grade Make: Polyplast Beralia/Power IShakti |
| 177 | PVC Tee 20mm casing capping Make Polyplast/BeraIia/Power/Shakti |
| 178 | PVC Tee 20mm conduit Make Polyplast/ Beralia/Power/ Shakti |
| 179 | PVC Bend 20mm Casing Capping Make: Polyplast/BeraIia/Power/ShaktI |
| 180 | PVC Bend 20mm conduit Make: Polyplast/Beralia/Power/Shakti |
| 181 | Supply of PVC heavy duty Exhaust fan 300 mm with louvers & 100mm dia PVC and fixed with 300 mm x 300 mm x 4mm PVC sheet. |
| 182 | LED tube rod 4' x 20 W conforming to IS 2418-1997 Make Philips/Crompton Greaves/GEC/Wipro/Bajaj/ Havells/Asian |
| 183 | 5 Pin 15 Amps switch socket combination with PVC mounting box Make : Havells/ GM Modular/Legrand/Polycab |
| 184 | 5 Pin 5 Amps switch socket combination with PVC mounting box Make- Havells/ GM Modular/Legrand/Polycab |
| 185 | Switch piano type 5 Amps Make- Havells/ GM Modular/Legrand /Polycab |
| 186 | MCB DP 32Amps conforming to IS 8828-1996 Make Havells/ L&T/Anchor |
| 187 | PVC junction box 3 way 25mm cassing capping Make Havells/ L&T/Anchor |
| 188 | Wire PVC insulated cable 1.5 sqmm multistranded Copper conductor single core 1100V, grade conforming to IS 694/1990 a roll of 90m long of Make: Havells/ Finolex/ Plaza /Nicco/ Polycab /Anchor /GIoster. |
| 189 | Wire PVC insulated cable 2.5sqmm multistranded Copper conductor single core 1100V, grade conforming to IS 694/1990 a roll of 90m long of Make: Havells/ Finolex/Plaza/ Nicco/ Polycab /Anchor /Gloster. |
| 190 | Sand Bag (PP as HDPE fabric 100 to 120 GSM) min length 660 mm and min width 350 mm. |
| 191 | MS/GI Bench: - Fabrication and supply of MS/GI bench as per specified as below:-(a) Size - 1.8 mtr x 0.50 mtr x 0.90 mtr(b) Frame - equal angle 40 x 40 x 4 mm and Fl 40 x 4 mm for frame and support and 12 mm ply fixed on the top of base frame and horizontal support with cushion and cushion cloth.(c) Fixing - (a) Fixing - Fixed with self drilled fastener of 8 mm dia Nos (04)(d) Steel bench should have folded and unfolded arrangement with the wall.(e) All steel should be pre painted. (Make of plywood Century/ Kitply/Archid ply/National Plywood/ Anchor/ and Make of steel : SAIL/TATA/JINDAL |
| 192 | SIGI Rack: Fabrication and supply of MS/GI rack as per specified as below: -(a) Size - 1.8 mtr x 0.50 mtr(b) Frame - equal angle 40 x 40 x 4 mm and Fl 40 x 4 mm for frame and support and 12 mm ply fixed on the top of base frame. (d) Support — 0.45mtr length of equal angle 40 x 40 x 4 mm with pre punched. (Nos-04)(c) Fixing - Fixed with self drilled fastener of 8 mm dia (Nos-04) (d) All steel should be pre painted.(Make of plywood Century/ Kitply/Archid ply/National Plywood/ Anchor and Make of steel : SAIL/TATA/JINDAL |
| 193 | EPDM :- 1.5 mm thick EPDM (Ethylene Proplene Diene Monomer) is a high performance synthetic rubber membrane over apreared concrete surface to provide a durable, flexible and waterproof lining. |
| 194 | MS Hollow Square Pipes(50x50x2mm) |
| 195 | PPGI Sheet (3000mm x 1050mm x 0.5mm) |
| 196 | PPGI Sheet (12' x 3'x1mm ) |
| 197 | 7ft Stainless steel Circular Pipe (6\\"dia) long with two 'L' Bend |
| 198 | 12ft PVC Pipe (5\\") |
| 199 | 'L' shaped Iron angle (1\\"x1\\"x3mm) |
| 200 | flat Iron frame (1\\"x3mm) |
| 201 | Rectangular iron square pipe (1\\"x3\\"x3mm) |
| 202 | MS Door of size 2.1M x 1.2M with single leaf 2mm thick MS sheet covering Including 1 Nos MS sliding door bolt 300mm, two Nos -Tower bolt 200mm , three Nos - MS hinge 125mm size , two Nos -125mm Handle fabricated out of 25 x 6mm thick flat iron,four Nos - 40mm x 6mm of 300 mm long hold fast of Fl made to shape, complete with two coats of synthetic enamel plaint over a coat of red oxide. The cost to incl all type of fabrication and erection. Make of sturctural members are SAIL/TATA/RINL/JINDAL |
| 203 | M & L for hardcore broken stone or boulders of gauge n exec 63mm, deposited spread and levellled in layers n exc 15 cm thick, watered and rammed to true surface completed as as specified |
| 204 | M&L for cement concrete 300mm & 200mm thick in foundation normal mix type B1, 1:2:4 using 20mm grade aggregate complete all as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender