Housing Urban and Rular Development Government Departments Closing in 0 days TDR #58528461

Tender For Permanent Restoration Of Road From Km 28Th Of T01 To Dabrote

Issued by Government Departments · Rajouri, Jammu and Kashmir
Tender Value
1.49 Crore
Estimated cost
Bid Submission
19 Nov 2026
0 days left
EMD
2.99 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Permanent Restoration Of Road From Km 28Th Of T01 To Dabrote

BOQ

Name of Work:- Permanent Restoration of road from Km 28th of T01 to Dabrote
Sl. No. Item Description
1Earth work in excavating for structure as per drawing and technical specification clause 301.2 including setting out construction of shoring and bracing, removal of slumps and other delirious material and disposal up to a lead of 50mts dressing of sides and bottom and back filling in trenches with excavate suitable material including dewatering if any up to 3mts depth in AKS
2Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
3Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (with 15% Boulder)
4Polygonal/Random Rubble Masonry uncoursed brought to course in 1:6 fine sand mortar in foundation and plinth with Cement mortar 1:6 (1 Cement : 6 coarse sand)
5Polygonal/Random Rubble Masonry Laid Dry uncoursed brought to course in foundation and plinth With bond stone.
6Providing and laying Coping/flooring 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
7Back filling behind R/wall Abutment wing wall Return wall with available stone from earthwork complete as per drawing & technical specification clause 1204.3.8 labour rate.
8Providing and laying wire crates with least dimension 200mm as per drawing and technical specifications as per drawing, all complete as per direction of Engineer-in-charge.
9Providing and laying non-pressure of specified class R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete. Non-pressure NP-3 class (Medium duty) R.C.C. pipes 600 mm dia. R.C.C. pipe
10Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings etc. mass concrete.
11Scarifying of existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift of 3m and lead upto 1000 m as per Technical Specification clause 301.4
12Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts. spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-ChargeWith material conforming to Grade-l (size range 75 mm to 0.075 mm) having CBR Value-30
13Providing, laying, spreading and compacting stone aggregates of specific sizes to WBM Gr II specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, complete job
14Providing and applying Tack Coat with Bitumen emulsion (RS-I) using emulsion distributor at the rate of 0.25 to 0.30 Kg per Sqm on the prepared granular surfaces treated with primer and cleaned with Hydraulic broom as per technical specification clause 503 including leads, lifts, carriages, loading and unloading complete
15Providing and laying bituminous macadam 50mm thick with hot mix plant using crushed aggregates of grading as per Table 500.4 premix with bituminous binder, transported to site upto a lead of 1000m laid over a previously prepared surface with paver finisher to the required grade level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504 complete job
162 cm premix carpet surfacing with 1.8cum and 0.90 cum of stone chippings of 13.2 mm size and 11.2 size respectively, per 100 sqm and 52kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately).16.40.1With paving Asphalt grade VG-10 heated and then mixed withsolvent at the rate of 70 grams per kg of asphalt.16.40.2With paving Asphalt grade VG-30 with no solvent. 16.40.3With Refinery Modified Bitumen CRMB 55 conforming toIRC: SP: 53
17Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels ,grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 (Type B) Bitumen S-90
18Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer-in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer -in - charge
19Carriage/consumption of material
20Sand for an average distance of 175km by MT
21Aggregate 20 mm nominal size for an average distance of 60 km by MT
22Aggregate 40 mm nominal size for an average distance of 60km by MT
23Stone for an average distance of 25 km by MT Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58528461
AUTHORITY Government Departments
TENDER VALUE 1.49 Crore
LAST DATE 19-11-2026
Authority
Authority Name Road And Building Department
Work Description Tender for Permanent Restoration Of Road From Km 28Th Of T01 To Dabrote
Basic Detail
Tender No EE/PMGSY/R/35 OF 2026-27 Dated 12.11.2026
Bidding Type Tender
Location
City Rajouri
State Jammu and Kashmir
Key Dates
Publish Date 13 Nov 2026
Submission Date 19 Nov 2026
Open Date 20 Nov 2026
Finance
Tender Value 1.49 Crore
Tender Fee 3000
EMD 2.99 Lakhs
Exemption Not Available
Document List
3081abee-065b-464f-9266-3e756109ba82.html
BOQ_236808.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

3081abee-065b-464f-9266-3e756109ba82.html

xls

BOQ_236808.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender