Tender For Construction Of R.I. Office-Cum-Residence Building At Joda Under Barbil Tahasil In The District Of Keonjhar Buildings.
Tender Value
76.89 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
0 days left
EMD
76900
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendujhar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of R.I. Office-Cum-Residence Building At Joda Under Barbil Tahasil In The District Of Keonjhar Buildings.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing brick or stone masonry in Cement mortar or lime including stacking the useful materials for re-use and removing the debris within 50m lead etc. complete as per direction of Engineer-in-Charge. |
| 2 | Earthwork in excavation of foundation in stoney earth and gravel mixed with stone boulders not exceeding 0.014 cum in volume with initial lead and initial lift including shoring,shuttering, propping bullahs, piling,dewatering from foundation, with & working pumps & staking the excaveted materials away from the working area including rough dressing the bed and foundation tranches to required size including cost, conveyance, taxes, cess, royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge.a) Ground Floor |
| 3 | b) Site Development |
| 4 | c) Compound wall |
| 5 | Supplying and filling in foundation and plinths with sand well watered and compacted including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additonal Charges, watering, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.a) Ground Floor |
| 6 | b) Compound Wall |
| 7 | c) Approach Road |
| 8 | Providing and laying plain cement concrete (1:3:6)(using branded cement) in foundation using 4 cm size hard crusher broken granite metal of approved quality from approved quarry including mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period including cost of all material, labour, conveyance, loading and unloading, taxes,cess, royalties, DMF, EMF, Additonal Charges, scaffolding, watering, curing, sundries, tools and plants,etc. ,complete as per the direction of the Engineer-in-charge.a) Ground Floor |
| 9 | b) Compound Wall |
| 10 | c) Approach Road |
| 11 | Cement Concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge a) Ground Floor |
| 12 | c) Parking shed |
| 13 | d) Approach Road |
| 14 | R.C.C. work of M-25 in following works using 20 mm down graded hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, DMF, EMF, Addtional charges, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge. i) R.C.C Column Footing |
| 15 | ii) R.C.C Columns up to Plinth Beam level Ground Floor |
| 16 | iii) R.C.C Grade Beam Ground Floor |
| 17 | iv) R.C.C Column Ground Floor |
| 18 | iv) R.C.C Column First Floor |
| 19 | iv) R.C.C Column Second Floor |
| 20 | v) R.C.C Lintel Ground Floor |
| 21 | v) R.C.C Lintel First Floor |
| 22 | vi) R.C.C Roof Beam Ground Floor |
| 23 | vi) R.C.C Roof Beam First Floor |
| 24 | vi) R.C.C Roof Beam Second Floor |
| 25 | viii) R.C.C Chajja Ground Floor |
| 26 | viii) R.C.C Chajja First Floor |
| 27 | ix) R.C.C Roof Slab Ground Floor |
| 28 | ix) R.C.C Roof Slab First Floor |
| 29 | ix) R.C.C Roof Slab Second Floor |
| 30 | ix) R.C.C Staircase Ground floor |
| 31 | ix) R.C.C Staircase First Floor |
| 32 | ii) R.C.C Columns BaseCompound wall |
| 33 | iii) R.C.C Column up to Plinth Beam Compund wall |
| 34 | iii) R.C.C Plinth Beam Compund wall |
| 35 | iii) R.C.C Column Top Chhajah Compund wall |
| 36 | Supplying steel i.e. Tor Steel / HYSD Bars conforming IS-1786 including straightening, cutting, bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (Linear measurement will be taken and quantity will be calculated on standard weight of tor steel / HYSD bars for all heights) complete as per specification & direction of Engineer-in-charge.a) Ground Floor |
| 37 | b) First Floor |
| 38 | c) Second Floor |
| 39 | d) Compound wall |
| 40 | Fly Ash brick masonry in cement mortar (1:6) (Using Branded Cement) in foundation & plinth using Fly Ash bricks of 25x12x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties, DMF, EMF, Additonal Charges and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per specification & direction of Engineer-in-charge.a) Ground Floor |
| 41 | b) Compound Wall |
| 42 | Providing Fly Ash brick masonry work in super structure using 25 X 12 X 8 cm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand),(using branded cement) immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additonal Charges,scaffolding, watering, curing, sundries, tools and plants,etc., complete as per the direction of the Engineer-in-charge.a) Ground Floor |
| 43 | b) First Floor |
| 44 | c) Second Floor |
| 45 | d) Compound wall |
| 46 | Providing Fly Ash brick masonry work in super structure using 25 X 12 X 8 cm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:4 (1 cement : 4 sand),(using branded cement) for 0.125 mm wall immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additonal Charges,scaffolding, watering, curing, sundries, tools and plants,etc., complete as per the direction of the Engineer-in-charge.a) Compound wall |
| 47 | Providing 12 mm thick cement mortar 1:4 (1 cement : 4 sand )(using branded cement) to outside surface / plumbed surface of masonry, raking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing grooves or beads where ever necessary, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additonal Charges, scaffolding, watering. curing, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge.a) Ground Floor |
| 48 | Providing 12 mm thick cement mortar 1:6 (1 cement : 6 sand )(using branded cement) to outside surface / plumbed surface of masonry, raking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing grooves or beads where ever necessary, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additonal Charges, scaffolding, watering. curing, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge.a) Ground Floor |
| 49 | b) First Floor |
| 50 | c) Second Floor |
| 51 | d) Compound wall |
| 52 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) (Using Branded Cement) with screened and washed sharp sand for mortar and finished smooth to the inside rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves or beads where ever necessary with cost, conveyance, royalties, DMF, EMF, Additonal Charges and taxes of all materials with cost of all labour, labour cess, T&P, and scaffolding required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge.a) Ground Floor |
| 53 | b) First Floor |
| 54 | c) Second Floor |
| 55 | Providing 6 mm thick cement plaster (1:4)(1 cement : 4 sand ) (using branded cement)to RCC surfaces finished smooth including closed deep chiping and slury treatment., raking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing grooves or beads where ever necessary, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering. curing, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge. |
| 56 | b) First Floor |
| 57 | Supplying, fitting and fixing vitrified tile of size 600mm x 600mm of approved make a shade in floor on 25mm thick bed of C.M. (1:1) (Using Branded Cement) and filling the joint with white cement mixed with pigment to match the shades of the tile including washing and cleaning with oxalic acid complete including cost of all materials, taxes, labour, labour cess, DMF, EMF, Additonal Charges T&P etc. required for the work complete in all respect as per specification & direction of Engineer-in-charge.a) Ground Floor |
| 58 | b) First Floor |
| 59 | Providing, fitting, fixing vitrified tiles of size 600mm x 600mm of approved make (Orient Bell, Somany, Kajaria, Johnson) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) (Using Branded Cement) jointed with neat cement mixed with pigment to match the shades of the tiles including washing and cleaning with oxalic acid and polishing etc. complete with cost, conveyance, royalties and taxes of all materials all labour,labour cess complete in all respects as per specification & direction of Engineer-in-charge.a) Ground Floor |
| 60 | b) First Floor |
| 61 | Supplying, fitting and fixing Chequared Tile of approved make a shade in floor on 25mm thick bed of C.M. (1:1) (Using Branded Cement) and filling the joint with white cement mixed with pigment to match the shades of the tile including washing and cleaning with oxalic acid complete including cost of all materials, taxes, labour, labour cess, DMF, EMF, Additonal Charges T&P etc. required for the work complete in all respect as per specification & direction of Engineer-in-charge.a) Ground Floor |
| 62 | Providing supplying, fitting, fixing of polished black granite tile in flooring on 20mm thick bed of C.M (1:3) (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tile including watering & curing with cost, conveyance, royalty, DMF, EMF, Additional Charges and taxes of all materials and labour with T&P required for the work etc. complete as per direction of Engineer-in-charge.a) First Floor |
| 63 | Supplying, Fitting & Fixing M.S. Grill, Grills gates, MS gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of MS Square bar / flat including stair case hand railing with 40mm dia GI pipe etc. including drilling holes in walls priming the grill with red oxide primer including cost ,conveyance, taxes of all material, labour ,cess required for the work complete as per the direction of the Engineer-in-charge.a) Ground Floor |
| 64 | b) First Floor |
| 65 | c) Second Floor |
| 66 | d) Compound wall |
| 67 | Labour for fitting, fixing of M.S. Door / Window / Grill gates with C.C. (1:2:4) including cost of all labour (T&P) required for the work etc. complete as per direction of Engineer -in - Charge.A) Ground Floor |
| 68 | B) First Floor |
| 69 | C) Second Floor |
| 70 | Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC) (NCL VEKA LTD./ FENESTA / KOMMERLING) Two Track -Two Panel sliding window-60-Series duly manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frames and window sash of 39mm x 58mm x 2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame sash shall be fitted with 6mm thick clear glass os SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced large coupler at the site using anchor fasteners, silicon rubber sealant,easy glazing/deglazing at site etc. including cost and conveyance of all material, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-447-95 and other applicable codes and standards.a) Ground Floor |
| 71 | b) First Floor |
| 72 | Supplying, fitting, fixing of Un-plasticised poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD. ) Ventilator / Top Hung - 60 - Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frame, 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14, EN- 477-95 and other applicable codes and standards.a) Ground Floor |
| 73 | b) First Floor |
| 74 | Painting two coats with Synthetic enamel paint of approved quality and shade over a coat of primer (Red Oxide Primer) on surfaces as specified below Steel Surface) to give an even shade with 2 coats of approved quality paint, including cost of all materials, labour, conveyance, taxes, cess, royalties, scaffolding. watering, curing, sundries. tools and plants, etc., complete as per the direction of the Engineer-in-charge.a) Ground Floor |
| 75 | b) First Floor |
| 76 | c) Second Floor |
| 77 | Priming one coat of primer to wall surface with any approved shade including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge.A) Ground Floor |
| 78 | B) First Floor |
| 79 | C) Second Floor |
| 80 | d) Compound wall |
| 81 | Finishing wall surface of walls with Acrylic wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding & staging charges with,cost of all materials, taxes, cess, labour, conveyance, royalties, watering, curing, tools and plants, etc. complete, as per the direction of the Engineer-in-charge.Ground Floor |
| 82 | B) First Floor |
| 83 | C) Second Floor |
| 84 | Distempering two coats to interior wall surface with any approved shade including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. |
| 85 | B) First Floor |
| 86 | C) Second Floor |
| 87 | Finishing outside wall surface with painting two coats with Weather coat paint (1st quality) exterior grade (Water based) of approved make & approved shade to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cess, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge. Ground Floor |
| 88 | B) First Floor |
| 89 | C) Second Floor |
| 90 | d) Compound wall |
| 91 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fitting and fixture complete etc including cost of all materials, hardware fittings, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge. A) Ground Floor |
| 92 | B) First Floor |
| 93 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect etc. complete.a) Ground Floor |
| 94 | b) First Floor |
| 95 | Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) (Using Branded Cement) using 4.7mm size hard granite crusher broken chips and screened & washed sharp sand and finished smooth to the rough surface of roof slab including watering and curing with cost, conveyance, royalties, DMF, EMF, Additonal Charges and taxes of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge.a) First Floor |
| 96 | b) Second Floor |
| 97 | Providing, supplying, fitting and fixing of 4 dia PVC rain water down pipes for disposal of water including cost, conveyances, taxes of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge.Terrace Floor |
| 98 | Structural steel riveted bolted or welded in built of section, trusses and framed work includingParking Shed |
| 99 | Providing, fitting , fixing of G.C.I. Colour Sheet (Bhusan) in roofing including fixing of ridges wind ties etc. complete but excluding cost of fitting including drilling holes in wind ties including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of Engineer-in- Charge.Parking Shed |
| 100 | Earthwork in excavation of foundation in hard soil within 50m initial lead and 1.5m, initial lift including shoring,shuttering, propping bullahs, piling,dewatering from foundation, with & working pumps & staking the excaveted materials away from the working area including rough dressing the bed and foundation tranches to required size including cost, conveyance, taxes, cess, royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge a) Approach road |
| 101 | b) Prking shed |
| 102 | E.I. WorksRecessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / KEI / Anchor / Havells /Polycab) (Make of Switch, Socket & Regulator/Anchor(Roma Classic)/Havells(Crabtree)/Legrand) ( wire colour code to be followed i.e . Neutral-Black, Earthing-Green Phase-R-Y-B )Group-A -L.P- F.P- C.B.P- |
| 103 | Group-B L.P- F.P- C.B.P- |
| 104 | Group-C L.P- F.P- C.B.P- |
| 105 | Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with piano type switch , phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. |
| 106 | Supply and fixing of 5 Amp plug with switch on existing board (Modular type/cover including connection etc. as required ) |
| 107 | SF of 3 pin 15 Amp plug point on M.S. Board Modular type |
| 108 | Circuit Submain wiring in PVC Conduit with inverter wiring2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 109 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm -do- |
| 110 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
| 111 | 2 X 6 sq.mm +1 X 2.5 sq.mm -do- |
| 112 | S/F of Bakelite angle holder/batten holder of ISI marked including connection etc as required . |
| 113 | S/F of 10 watt LED bulb (Havells/Phillips/CG) |
| 114 | S/F of A.C. Ceiling fan of size 48 without regulator . (Make- Usha(swift/racer)/Havells/Crompton-Breeza) (Except Brown Colour) |
| 115 | Supply and fixing of Electronic Step Type fan regulator (Make-Cona/ Anchor/ Usha/Bajaj) |
| 116 | Installlation, Testing and commissioning of ceiling fan including wiring the down rod of standard length(up to 30 cm) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor etc. as required. |
| 117 | Supply of Exhaust fan of 12 size (Make-Usha/Havells/CG) |
| 118 | Installation, Testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required. |
| 119 | S/F of 20 watt LED tube light fitting.(Havells/Phillips/CG) |
| 120 | S/F of Superior type dingdong call bell with push switch |
| 121 | S/F of computer board consisting 3 nos 5amp switch and socket |
| 122 | S/F of 60 watt LED street light (Havells/Phillips/CG) |
| 123 | S/F of G.I. Bend pipe for street light |
| 124 | S/F of Modular starter for AC machine(Crabtree/Schneider/Siemens/Legrand) |
| 125 | S/F of sine wave Inverter of capacity 1100 VA (Luminous/Microtech) |
| 126 | S/F of Tubular battery of capacity 150Ah((Exide Invatall1500/Luminous) |
| 127 | Battery Rack for single battery |
| 128 | Supply and fixing of 4 way (4+12) double door TPN DB with sheet steel enclosure,distribution board,on suface/recess,complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,detachable gland plate,interconnection,phosphate and powder painted including earthing etc.as required. (L&T/Havells/Anchor) |
| 129 | Supply and fixing of 12 way double door single pole MCB DB with sheet steel enclosure,distribution board,on suface/recess,complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,detachable gland plate,interconnection,phosphate and powder painted including earthing etc.as required. (L&T/Havells/Anchor) |
| 130 | Supply and fixing of 6Amp single pole MCB(Make-Havells(Craptree)/L&T/Legrand) |
| 131 | Supply and fixing of 16Amp single pole MCB(Make-Havells(Craptree)/L&T/Legrand) |
| 132 | S/F of 32 Amp DP MCB (Make-Havells(Craptree)/L&T/Legrand) |
| 133 | S/F of 63 Amp DP MCB (Havells/HPL/L&T) |
| 134 | S/F of 32Amp DP switch (Havells/crabtree) |
| 135 | S/F of Street light- 60W,120 lm/w efficacy , new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 136 | Supply of 7 mtr long single arm hot dip Galvanized Octagonal pole manufactured from HT steel as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat as per direction of Engg. in Charge. |
| 137 | Supply ,Installation,testing & commissioning of main control panel plinth mounted both side openable made out of CR sheet of 16 SWG and boarder angle frame to provide above panel with proper space,hinged door must be painted one coat of powder coating and two coat of enamel grey paint including wiring with appropriate size FRLS PVC single core multistrand copper cable,cable alley and connector with following arrangement.(Depth 15 cm to 30 cm) size (36 x 48 x11 )=(0.9 x 1.2) sq.mtrDIGITAL INSTRUMENT:- Voltmeter, Ameter,selector switch& Indicating lamp (R-Y-B) -1 set digital,CT coil up to 400 AmpINCOMING160 Amp 4 pole MCCB, 36 KA (L&T/Havells)-1No.200 Amp TPN Copper Bus-bar (Havells/L&T)-1No.OUTGOING63 Amp four pole MCB (L&T/Havells)-2Nos.32 Amp 4 pole MCB (L&T/Havells)-2Nos.63 Amp DP MCB (Havells/HPL/L&T)-2Nos.32 Amp DP MCB (Havells/HPL/L&T)-6Nos. |
| 138 | S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type IP66 based panel made out by 2mm hot dip galvanised steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 25A TPN MCB 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 32 A 3P contactor, OLR,RYB,ON,OFF trip indication, Type-II SPD 40ka ,,03 nos 10A 4P MCB as outgoing Make-LEGRAND-dx3/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 3 years of acceptance of materials |
| 139 | S/F of 16 sq.mm 3 core Aluminium Armoured cable(Havells/Polycab) |
| 140 | S/F of 25 sq.mm 3 1/2 core Aluminium Armoured cable(Havells/Polycab) |
| 141 | Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size 16 sq.mm & 25 sq.mm direct in ground as required. |
| 142 | Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
| 143 | Supply of Extra running earth with 8 SWG ( 4mm ) dia copper wire |
| 144 | PH WorkProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C - PVC pipe(Ashirbad/Supreme/Astrol/Ori Plast - SDR - 11)Ground Floor |
| 145 | First Floor |
| 146 | 25mm dia C - PVC pipe(Ashirbad/Supreme/Astrol/Ori Plast - SDR - 11)Ground Floor |
| 147 | First Floor |
| 148 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.32mm dia PVC ASTM pipe (sch-80)(Ashirbad/Supreme/Astrol/Ori Plast) |
| 149 | 40mm dia PVC ASTM pipe (sch-80))(Ashirbad/Supreme/Astrol/Ori Plast) |
| 150 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)15mm dia CP angle stop cock(FLR-ACR-5053N) |
| 151 | 15mm dia CP two way bib cock(FLR-CHR-5041N) |
| 152 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 153 | 15mm dia. C.P swanneck pillar cock ( Jaquar make)ARI-MCH-39011 |
| 154 | 25mm dia brass full way valve (Shakti make) |
| 155 | 32mm dia brass full way valve (Shakti make) |
| 156 | 40mm dia brass full way valve (Shakti make) |
| 157 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 158 | WALL MIXER WITH PROVISION FOR OVERHEAD Shower (FLR-ABR-5273UPR) |
| 159 | 15mm CP Extension piece |
| 160 | 125mm CP grating |
| 161 | 15mm size C.P. flange |
| 162 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank roof of 1st floor |
| 163 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.Ground Floor |
| 164 | First Floor |
| 165 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-chargeGround Floor |
| 166 | First Floor |
| 167 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.Ground Floor |
| 168 | First Floor |
| 169 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Supreme /Ashirvad) |
| 170 | 110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 171 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 172 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 173 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 174 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 175 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 176 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 177 | 110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make) |
| 178 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI p or s trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 179 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 180 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make) |
| 181 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral p or s trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)European water closet with p trap plain(Hindware/Parryware/Neycer make) |
| 182 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 183 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24 inch x 18 inch x 10 inch sink (Jaquar make/ Plaza Make/ Cera make/ Hindwere Make) |
| 184 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)25mmx600mm long CP towel rail |
| 185 | Towel ring |
| 186 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)600mmx125mm plate glass shelf with CP/NP guard rails. |
| 187 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)600mmx450mm size B.E mirror (swivelled type) |
| 188 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)CP soap holder |
| 189 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)½ inch x 5 inch CP Shower (Plaza Deluxe Make) |
| 190 | Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 191 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 192 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18 inch dia RCC MH cover |
| 193 | Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge |
| 194 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 195 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 196 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargeGround Floor |
| 197 | First Floor |
| 198 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx60cmGround Floor |
| 199 | First Floor |
| 200 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.Ground Floor |
| 201 | First Floor |
| 202 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx30cmGround Floor |
| 203 | First Floor |
| 204 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 205 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge |
| 206 | Fitting & fixing of Aquagurad Cooler Cum Purifier for drinking water privision. 1noCost of Aquaguard Cooler - Cum Purifier |
| 207 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge100mm dia P.V.C. pipe |
| 208 | 150mm dia P.V.C. pipe |
| 209 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18 inch dia RCC Cover ) |
| 210 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 211 | 1 no 20 Users Septic tankEarth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 212 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. |
| 213 | Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge |
| 214 | Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. |
| 215 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 216 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 217 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 218 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-chargeRCC floor, roof slab chhaja up to 4.430 m height |
| 219 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 220 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 221 | Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge |
| 222 | Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. |
| 223 | Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. |
| 224 | Construction of production well including scientific source finding through consolidated and unconsolidated rock with down the ODEX drilling rig with PVC, GI, MS pipe and installation of submersible pump set with all accessories.Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with combination drilling rig as required to suit the site condition as per the direction of Engineer-in-charge including supply of own rig with its accessories, tools and plant and consumables etc. for lowering of 200mm /150mm dia M.S. Pipe / PVC casing fitted with socket and with or without well screen as per the necessity for sub-medium hard and boulder formation (M.S./PVC casing pipe if required to prevent collapse of over burden is to be provided by contractor including lowering and withdrawing after completion of the tube well) 200mm dia x 400mm dia in over burden position inlcluding packing of gravel supplied by Contractor for 400mm bore only etc as per direction of Engineer incharge.Drilling for 200mm dia bore 00mtr to 20 mtr |
| 225 | 21mtr to 40 mtr |
| 226 | Drilling for 150mm dia bore 41mtr to above |
| 227 | Lowering the following size of G.I. / PVC / M.S. housing pipe with or without slotted pipe as per the necessity for ground level upto 45 mtr depth and fitted and fixed up perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plants etc all complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials.Lowering 200mm dia M.S.ERW pipe casing pipe 00mtr to 40 mtr |
| 228 | cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge in obtained from the tube well including supply and use of all necessary equipment and labour as per direction of Engineer-in-charge.By DTH / Rotary |
| 229 | Supplying all labour, materials and T&P for providing sanitary sealing by cement concrete grouting of annular space around M.S. casing pipe uptp 5 mtr below groun dlevel to plug the bore hole excluding cost of cement etc all complete as per direction of EIC. |
| 230 | Supplying all materials, labour, T&P and providing fittings and fixing submersible pump with squarrel cage induction type submersible electric motor to run on 3 phase / single phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specification with suitable control panel, jointing with GI / PVC / HDPE pipes, electrification, testing commissioning, trial running, conveyance of all materials to worksite, payment to taxes etc all complete as per the specification and direction of the Engineer in charge. (Texmo / Crompton Greaves / Kirloskar make)2HP single phase 3 stage vertical / horizontal submersible pump set at head range 20 to 35 meters discharge 145 to 110 LPM with outlet dia of 25mm |
| 231 | DOL control panel |
| 232 | 40mm steel short piece |
| 233 | well cap |
| 234 | 50mm size CI bracket |
| 235 | 4 sqmm flat cable |
| 236 | steel rope with cover |
| 237 | labour charges for lowering including transportation |
| 238 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge32mm HDPE pipes (Finolex/Supreme make) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 14, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender