Housing Urban and Rular Development Government Departments Closing in 0 days TDR #58528394

Tender For Construction Of R.I. Office-Cum-Residence Building At Barbil Under Barbil Tahasil In The District Of Keonjhar Buildings.

Issued by Government Departments · Kendujhar, Odisha
Tender Value
77.42 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
0 days left
EMD
77500
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kendujhar → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of R.I. Office-Cum-Residence Building At Barbil Under Barbil Tahasil In The District Of Keonjhar Buildings.

BOQ

Name of Work:- Construction of R.I. Office-cum-Residence Building at Barbil under Barbil Tahasil in the District of Keonjhar Buildings.
Sl. No. Item Description
1Dismantling and removing brick or stone masonry in Cement mortar or lime including stacking the useful materials for re-use and removing the debris within 50m lead etc. complete as per direction of Engineer-in-Charge.
2Earthwork in excavation of foundation in stoney earth and gravel mixed with stone boulders not exceeding 0.014 cum in volume with initial lead and initial lift including shoring,shuttering, propping bullahs, piling,dewatering from foundation, with & working pumps & staking the excaveted materials away from the working area including rough dressing the bed and foundation tranches to required size including cost, conveyance, taxes, cess, royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge.a) Ground Floor
3b) Site Development
4c) Compound wall
5d) Parking Shed
6Supplying and filling in foundation and plinths with sand well watered and compacted including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additonal Charges, watering, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.a) Ground Floor
7b) Compound Wall
8c) Approach Road
9Providing and laying plain cement concrete (1:3:6)(using branded cement) in foundation using 4 cm size hard crusher broken granite metal of approved quality from approved quarry including mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period including cost of all material, labour, conveyance, loading and unloading, taxes,cess, royalties, DMF, EMF, Additonal Charges, scaffolding, watering, curing, sundries, tools and plants,etc. ,complete as per the direction of the Engineer-in-charge.a) Ground Floor
10b) Compound Wall
11c) Approach Road
12Cement Concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge a) Ground Floor
13b) Compound Wall
14c) Parking shed
15d) Approach Road
16R.C.C. work of M-25 in following works using 20 mm down graded hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, DMF, EMF, Addtional charges, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge. i) R.C.C Column Footing
17ii) R.C.C Columns up to Plinth Beam level Ground Floor
18iii) R.C.C Grade Beam Ground Floor
19iv) R.C.C Column Ground Floor
20iv) R.C.C Column First Floor
21iv) R.C.C Column Second Floor
22v) R.C.C Lintel Ground Floor
23v) R.C.C Lintel First Floor
24vi) R.C.C Roof Beam Ground Floor
25vi) R.C.C Roof Beam First Floor
26vi) R.C.C Roof Beam Second Floor
27viii) R.C.C Chajja Ground Floor
28viii) R.C.C Chajja First Floor
29ix) R.C.C Roof Slab Ground Floor
30ix) R.C.C Roof Slab First Floor
31ix) R.C.C Roof Slab Second Floor
32ix) R.C.C Staircase Ground floor
33ix) R.C.C Staircase First Floor
34ii) R.C.C Columns BaseCompound wall
35iii) R.C.C Plinth Beam Compund wall
36iii) R.C.C Column and Beam Compund wall
37iii) R.C.C Column Top Chhajah Compund wall
38Supplying steel i.e. Tor Steel / HYSD Bars conforming IS-1786 including straightening, cutting, bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (Linear measurement will be taken and quantity will be calculated on standard weight of tor steel / HYSD bars for all heights) complete as per specification & direction of Engineer-in-charge.a) Ground Floor
39b) First Floor
40c) Second Floor
41d) Compound wall
42Fly Ash brick masonry in cement mortar (1:6) (Using Branded Cement) in foundation & plinth using Fly Ash bricks of 25x12x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties, DMF, EMF, Additonal Charges and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per specification & direction of Engineer-in-charge.a) Ground Floor
43b) Compound Wall
44Providing Fly Ash brick masonry work in super structure using 25 X 12 X 8 cm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand),(using branded cement) immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additonal Charges,scaffolding, watering, curing, sundries, tools and plants,etc., complete as per the direction of the Engineer-in-charge.a) Ground Floor
45b) First Floor
46c) Second Floor
47d) Compound wall
48Providing Fly Ash brick masonry work in super structure using 25 X 12 X 8 cm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:4 (1 cement : 4 sand),(using branded cement) for 0.125 mm wall immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additonal Charges,scaffolding, watering, curing, sundries, tools and plants,etc., complete as per the direction of the Engineer-in-charge.a) Ground Floor
49b) First Floor
50Providing 12 mm thick cement mortar 1:4 (1 cement : 4 sand )(using branded cement) to outside surface / plumbed surface of masonry, raking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing grooves or beads where ever necessary, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additonal Charges, scaffolding, watering. curing, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge.a) Ground Floor
51Providing 12 mm thick cement mortar 1:6 (1 cement : 6 sand )(using branded cement) to outside surface / plumbed surface of masonry, raking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing grooves or beads where ever necessary, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, DMF, EMF, Additonal Charges, scaffolding, watering. curing, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge.a) Ground Floor
52b) First Floor
53c) Second Floor
54d) Compound wall
55Providing 16 mm thick cement plaster with cement mortar of mix (1:6) (Using Branded Cement) with screened and washed sharp sand for mortar and finished smooth to the inside rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves or beads where ever necessary with cost, conveyance, royalties, DMF, EMF, Additonal Charges and taxes of all materials with cost of all labour, labour cess, T&P, and scaffolding required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge.a) Ground Floor
56b) First Floor
57c) Second Floor
58d) Compound wall
59Supplying, fitting and fixing vitrified tile of size 1200mm x 600mm of approved make a shade in floor on 20mm thick bed of C.M. (1:4) (Using Branded Cement) and filling the joint with white cement mixed with pigment to match the shades of the tile including washing and cleaning with oxalic acid complete including cost of all materials, taxes, labour, labour cess, DMF, EMF, Additonal Charges T&P etc. required for the work complete in all respect as per specification & direction of Engineer-in-charge.a) Ground Floor
60b) First Floor
61Providing, fitting, fixing vitrified tiles of size 1200mm x 600mm of approved make (Orient Bell, Somany, Kajaria, Johnson) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) (Using Branded Cement) jointed with neat cement mixed with pigment to match the shades of the tiles including washing and cleaning with oxalic acid and polishing etc. complete with cost, conveyance, royalties and taxes of all materials all labour,labour cess complete in all respects as per specification & direction of Engineer-in-charge.a) Ground Floor
62b) First Floor
63Supplying, fitting and fixing Chequared Tile of approved make a shade in floor on 25mm thick bed of C.M. (1:1) (Using Branded Cement) and filling the joint with white cement mixed with pigment to match the shades of the tile including washing and cleaning with oxalic acid complete including cost of all materials, taxes, labour, labour cess, DMF, EMF, Additonal Charges T&P etc. required for the work complete in all respect as per specification & direction of Engineer-in-charge.a) Ground Floor
64Providing supplying, fitting, fixing of polished black granite tile in flooring on 20mm thick bed of C.M (1:3) (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tile including watering & curing with cost, conveyance, royalty, DMF, EMF, Additional Charges and taxes of all materials and labour with T&P required for the work etc. complete as per direction of Engineer-in-charge.a) First Floor
65Supplying, Fitting & Fixing M.S. Grill, Grills gates, MS gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of MS Square bar / flat including stair case hand railing with 40mm dia GI pipe etc. including drilling holes in walls priming the grill with red oxide primer including cost ,conveyance, taxes of all material, labour ,cess required for the work complete as per the direction of the Engineer-in-charge.a) Ground Floor
66b) First Floor
67c) Second Floor
68d) Compound wall
69Labour for fitting, fixing of M.S. Door / Window / Grill gates with C.C. (1:2:4) including cost of all labour (T&P) required for the work etc. complete as per direction of Engineer -in - Charge.A) Ground Floor
70B) First Floor
71C) Second Floor
72d) Compound wall
73Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC) (NCL VEKA LTD./ FENESTA / KOMMERLING) Two Track -Two Panel sliding window-60-Series duly manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frames and window sash of 39mm x 58mm x 2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame sash shall be fitted with 6mm thick clear glass os SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced large coupler at the site using anchor fasteners, silicon rubber sealant,easy glazing/deglazing at site etc. including cost and conveyance of all material, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-447-95 and other applicable codes and standards.a) Ground Floor
74b) First Floor
75Supplying, fitting, fixing of Un-plasticised poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD. ) Ventilator / Top Hung - 60 - Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frame, 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14, EN- 477-95 and other applicable codes and standards.a) Ground Floor
76b) First Floor
77Painting two coats with Synthetic enamel paint of approved quality and shade over a coat of primer (Red Oxide Primer) on surfaces as specified below Steel Surface) to give an even shade with 2 coats of approved quality paint, including cost of all materials, labour, conveyance, taxes, cess, royalties, scaffolding. watering, curing, sundries. tools and plants, etc., complete as per the direction of the Engineer-in-charge.a) Ground Floor
78b) First Floor
79c) Second Floor
80d) Compound wall
81Priming one coat of primer to wall surface with any approved shade including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge.A) Ground Floor
82B) First Floor
83C) Second Floor
84d) Compound wall
85Finishing wall surface of walls with Acrylic wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding & staging charges with,cost of all materials, taxes, cess, labour, conveyance, royalties, watering, curing, tools and plants, etc. complete, as per the direction of the Engineer-in-charge.Ground Floor
86B) First Floor
87C) Second Floor
88Providing and applying painting over the inside plastered surfaces with 2 coats of Plastic emulsion paint of approved quality and shade, using the required quantity of Plastic emulsion paint as specified by the manufacturer to give an even shade including cost of all materials, labour, conveyance, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.Ground Floor
89B) First Floor
90C) Second Floor
91Finishing outside wall surface with painting two coats with Weather coat paint (1st quality) exterior grade (Water based) of approved make & approved shade to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cess, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge. Ground Floor
92B) First Floor
93C) Second Floor
94d) Compound wall
95Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fitting and fixture complete etc including cost of all materials, hardware fittings, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge. A) Ground Floor
96B) First Floor
97Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect etc. complete.a) Ground Floor
98b) First Floor
99Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) (Using Branded Cement) using 4.7mm size hard granite crusher broken chips and screened & washed sharp sand and finished smooth to the rough surface of roof slab including watering and curing with cost, conveyance, royalties, DMF, EMF, Additonal Charges and taxes of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge.a) First Floor
100b) Second Floor
101Providing, supplying, fitting and fixing of 4 dia PVC rain water down pipes for disposal of water including cost, conveyances, taxes of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge.Terrace Floor
102Structural steel riveted bolted or welded in built of section, trusses and framed work includingParking Shed
103Providing, fitting , fixing of G.C.I. Colour Sheet (Bhusan) in roofing including fixing of ridges wind ties etc. complete but excluding cost of fitting including drilling holes in wind ties including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of Engineer-in- Charge.Parking Shed
104Earthwork in excavation of foundation in all kind of soil (Hard Soil & Ordinary Soil) within 50m initial lead and 1.5m, initial lift including shoring,shuttering, propping bullahs, piling,dewatering from foundation, with & working pumps & staking the excaveted materials away from the working area including rough dressing the bed and foundation tranches to required size including cost, conveyance, taxes, cess, royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge
105E.I. WorksRecessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / KEI / Anchor / Havells /Polycab) (Make of Switch, Socket & Regulator/Anchor(Roma Classic)/Havells(Crabtree)/Legrand) ( wire colour code to be followed i.e . Neutral-Black, Earthing-Green Phase-R-Y-B )Group-A -L.P- F.P- C.B.P-
106Group-B L.P- F.P- C.B.P-
107Group-C L.P- F.P- C.B.P-
108Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with piano type switch , phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required.
109Supply and fixing of 5 Amp plug with switch on existing board (Modular type/cover including connection etc. as required )
110SF of 3 pin 15 Amp plug point on M.S. Board Modular type
111Circuit Submain wiring in PVC Conduit with inverter wiring2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia
1122 X 2.5 sq.mm +1 X 1.5 sq.mm -do-
1132 X 4 sq.mm +1 X 1.5 sq.mm -do-
1142 X 6 sq.mm +1 X 2.5 sq.mm -do-
115S/F of Bakelite angle holder/batten holder of ISI marked including connection etc as required .
116S/F of 10 watt LED bulb (Havells/Phillips/CG)
117S/F of A.C. Ceiling fan of size 48 without regulator . (Make- Usha(swift/racer)/Havells/Crompton-Breeza) (Except Brown Colour)
118Supply and fixing of Electronic Step Type fan regulator (Make-Cona/ Anchor/ Usha/Bajaj)
119Installlation, Testing and commissioning of ceiling fan including wiring the down rod of standard length(up to 30 cm) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor etc. as required.
120Supply of Exhaust fan of 12 size (Make-Usha/Havells/CG)
121Installation, Testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
122S/F of 20 watt LED tube light fitting.(Havells/Phillips/CG)
123S/F of Superior type dingdong call bell with push switch
124S/F of computer board consisting 3 nos 5amp switch and socket
125S/F of 60 watt LED street light (Havells/Phillips/CG)
126S/F of G.I. Bend pipe for street light
127S/F of Modular starter for AC machine(Crabtree/Schneider/Siemens/Legrand)
128S/F of sine wave Inverter of capacity 1100 VA (Luminous/Microtech)
129S/F of Tubular battery of capacity 150Ah((Exide Invatall1500/Luminous)
130Battery Rack for single battery
131Supply and fixing of 4 way (4+12) double door TPN DB with sheet steel enclosure,distribution board,on suface/recess,complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,detachable gland plate,interconnection,phosphate and powder painted including earthing etc.as required. (L&T/Havells/Anchor)
132Supply and fixing of 12 way double door single pole MCB DB with sheet steel enclosure,distribution board,on suface/recess,complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,detachable gland plate,interconnection,phosphate and powder painted including earthing etc.as required. (L&T/Havells/Anchor)
133Supply and fixing of 6Amp single pole MCB(Make-Havells(Craptree)/L&T/Legrand)
134Supply and fixing of 16Amp single pole MCB(Make-Havells(Craptree)/L&T/Legrand)
135S/F of 32 Amp DP MCB (Make-Havells(Craptree)/L&T/Legrand)
136S/F of 63 Amp DP MCB (Havells/HPL/L&T)
137Supply ,Installation,testing & commissioning of main control panel plinth mounted both side openable made out of CR sheet of 16 SWG and boarder angle frame to provide above panel with proper space,hinged door must be painted one coat of powder coating and two coat of enamel grey paint including wiring with appropriate size FRLS PVC single core multistrand copper cable,cable alley and connector with following arrangement.(Depth 15 cm to 30 cm) size (36 x 48 x11 )=(0.9 x 1.2) sq.mtrDIGITAL INSTRUMENT:- Voltmeter, Ameter,selector switch& Indicating lamp (R-Y-B) -1 set digital,CT coil up to 400 AmpINCOMING100 Amp 4 pole MCCB, 36 KA (L&T/Havells)-1No.200 Amp TPN Copper Bus-bar (Havells/L&T)-1No.OUTGOING63 Amp DP MCB (Havells/HPL/L&T)-2Nos.32 Amp DP MCB (Havells/HPL/L&T)-6Nos.
138S/F of 10 sq.mm 2 core Aluminium Armoured cable(Havells/Polycab)
139Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size 10 sq.mm direct in ground as required.
140Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.
141Supply of Extra running earth with 8 SWG ( 4mm ) dia copper wire
142PH WorksProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C - PVC pipe(Ashirbad/Supreme/Astrol/Ori Plast - SDR - 11)Ground Floor
143First Floor
14425mm dia C - PVC pipe(Ashirbad/Supreme/Astrol/Ori Plast - SDR - 11)Ground Floor
145First Floor
146Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.32mm dia PVC ASTM pipe (sch-80)(Ashirbad/Supreme/Astrol/Ori Plast)
14740mm dia PVC ASTM pipe (sch-80))(Ashirbad/Supreme/Astrol/Ori Plast)
148Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)15mm dia CP angle stop cock(FLR-ACR-5053N)
14915mm dia CP two way bib cock(FLR-CHR-5041N)
15015mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
15115mm dia. C.P swan neck pillar cock ( Jaquar make)ARI-MCH-39011
15225mm dia brass full way valve (Shakti make)
15332mm dia brass full way valve (Shakti make)
15440mm dia brass full way valve (Shakti make)
15515mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
156WALL MIXER WITH PROVISION FOR OVERHEAD Shower (FLR-ABR-5273UPR)
15715mm CP Extension piece
158125mm CP grating
15915mm size C.P. flange
160Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank roof of 1st floor
161supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.Ground Floor
162First Floor
163Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-chargeGround Floor
164First Floor
165Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.Ground Floor
166First Floor
167Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Supreme /Ashirvad)
168110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make)
169110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
170110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
171110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
172110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
173110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
174110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
175110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make)
176Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI p or s trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)580mm size Orissa pan (Hindware/Parryware/Neycer make)
177Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
178Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)
179Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral p or s trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)European water closet with p trap plain(Hindware/Parryware/Neycer make)
180Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal
181Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24 inch x 18 inch x 10 inch sink (Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)
182Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)25mmx600mm long CP towel rail
183Towel ring
184Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)600mmx125mm plate glass shelf with CP/NP guard rails.
185Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)600mmx450mm size B.E mirror (swivelled type)
186Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)CP soap holder
187Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make)½ inch x 5 inch CP Shower (Plaza Deluxe Make)
188Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
189Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
190Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18 inch dia RCC MH cover
191Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
192Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
193Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
194Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargeGround Floor
195First Floor
196Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx60cmGround Floor
197First Floor
198Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.Ground Floor
199First Floor
200Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx30cmGround Floor
201First Floor
202Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
203Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
204Fitting & fixing of Aquagurad Cooler Cum Purifier for drinking water privision. 1noCost of Aquaguard Cooler - Cum Purifier
205Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge100mm dia P.V.C. pipe
206150mm dia P.V.C. pipe
207Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18 inch dia RCC Cover )
208Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
2091 no 20 Users Septic tankEarth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
210Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
211Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge
212Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
213Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
214Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
215Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
216Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-chargeRCC floor, roof slab chhaja up to 4.430 m height
217Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
218Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
219Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
220Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.
221Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
222Construction of production well including scientific source finding through consolidated and unconsolidated rock with down the ODEX drilling rig with PVC, GI, MS pipe and installation of submersible pump set with all accessories.Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with combination drilling rig as required to suit the site condition as per the direction of Engineer-in-charge including supply of own rig with its accessories, tools and plant and consumables etc. for lowering of 200mm /150mm dia M.S. Pipe / PVC casing fitted with socket and with or without well screen as per the necessity for sub-medium hard and boulder formation (M.S./PVC casing pipe if required to prevent collapse of over burden is to be provided by contractor including lowering and withdrawing after completion of the tube well) 200mm dia x 400mm dia in over burden position inlcluding packing of gravel supplied by Contractor for 400mm bore only etc as per direction of Engineer incharge.Drilling for 200mm dia bore 00mtr to 20 mtr
22321mtr to 40 mtr
224Drilling for 150mm dia bore 41mtr to above
225Lowering the following size of G.I. / PVC / M.S. housing pipe with or without slotted pipe as per the necessity for ground level upto 45 mtr depth and fitted and fixed up perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plants etc all complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials.Lowering 200mm dia M.S.ERW pipe casing pipe 00mtr to 40 mtr
226Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge in obtained from the tube well including supply and use of all necessary equipment and labour as per direction of Engineer-in-charge.By DTH / Rotary
227Supplying all labour, materials and T&P for providing sanitary sealing by cement concrete grouting of annular space around M.S. casing pipe uptp 5 mtr below groun dlevel to plug the bore hole excluding cost of cement etc all complete as per direction of EIC.
228Supplying all materials, labour, T&P and providing fittings and fixing submersible pump with squarrel cage induction type submersible electric motor to run on 3 phase / single phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specification with suitable control panel, jointing with GI / PVC / HDPE pipes, electrification, testing commissioning, trial running, conveyance of all materials to worksite, payment to taxes etc all complete as per the specification and direction of the Engineer in charge. (Texmo / Crompton Greaves / Kirloskar make)2HP single phase 3 stage vertical / horizontal submersible pump set at head range 20 to 35 meters discharge 145 to 110 LPM with outlet dia of 25mm
229DOL control panel
23040mm steel short piece
231well cap
23250mm size CI bracket
2334 sqmm flat cable
234steel rope with cover
235labour charges for lowering including transportation
236Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge32mm HDPE pipes (Finolex/Supreme make) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58528394
AUTHORITY Government Departments
TENDER VALUE 77.42 Lakhs
LAST DATE 19-11-2026
Authority
Authority Name Road And Building Department
Work Description Tender for Construction Of R.I. Office-Cum-Residence Building At Barbil Under Barbil Tahasil In The District Of Keonjhar Buildings.
Basic Detail
Tender No PWDK- 18 / 2026-27
Bidding Type Tender
Location
City Kendujhar
State Odisha
Key Dates
Publish Date 14 Nov 2026
Submission Date 19 Nov 2026
Open Date 20 Nov 2026
Finance
Tender Value 77.42 Lakhs
Tender Fee 10000
EMD 77500
Exemption Available
Document List
a5d06f62-e539-4038-8d6a-f5bb8a76e915.html
BOQ_620835.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

a5d06f62-e539-4038-8d6a-f5bb8a76e915.html

xls

BOQ_620835.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender