Rural Development Government Departments Closing in 2 days TDR #58528392

Tender For Construction Of Up-Graded Higher Secondary School At Bapuji Govt. High School Building Daincha Under Naktideul Block In The District Of Sambalpur For The Year 2025-26

Issued by Government Departments · Sambalpur, Odisha
Tender Value
1.44 Crore
Estimated cost
Bid Submission
25 Nov 2026
2 days left
EMD
1.44 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sambalpur → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Up-Graded Higher Secondary School At Bapuji Govt. High School Building Daincha Under Naktideul Block In The District Of Sambalpur For The Year 2025-26

BOQ

Name of Work:- Construction of Up-graded Higher Secondary School at Bapuji Govt. High School building Daincha under Naktideul Block in the District of Sambalpur for the year 2025-26
Sl. No. Item Description
1Earth work in excavation of foundation in hard soil within initial lead and lift including rough dressing and breaking clods etc. complete. including dressing and levelling the bed not exceeding 1.50m depth and Depositing the Soil within initial lead of 50m & as per specification approved by the Department.
2Providing filling foundation and plinth with sand well watered and rammed with all leads and lifts including cost , conveyance, royality of materials labour . T & P etc. complete as per direction of Er. In Charge.
3Cement concrete (1:3:6) with 4cm size hard granite metal of approved quality and approved quarry in foundation including hoisting laying concrete with cost conveyance of materials including watering, curing, royality all T & P required for the work etc. complete as per direction of the Er. in charge.
4Cement concrete of proportion (1:2:4) with 12mm (1/2\\") size hard granite crusher broken chips including watering curing, cost, conveyance, royalties and all taxes of all materials labour with T&P required for the work etc.complete as per direction of Engineer-in-charge.
5Fly ash.Brick masonary in cement mortar ( 1:6 )using K.B.Bricks of size 10\\"x5\\"x3\\" having crushing strength between 100 Kg/Cm2 to 149 Kg/Cm2 after immersing the bricks for six hours in water before use in foundation plinth & basement and for ornamental flower beds plinth moulding and similar such type of works with all necessary projections flooring moulding corbelling, champhering watering and curing etc.including cost,conveyance,royalties and all taxes of all materials and cost of all labouir with T&P required for the work etc.complete in all respect as per direction of Engineer-in-charge.
6Fly ash.Brick masonary in cement mortar ( 1:6 )using K.B.Bricks of size 10\\"x5\\"x3\\" having crushing strength between 100 Kg/Cm2 to 149 Kg/Cm2 after immersing the bricks for six hours in water before use in superstructure with all necessary projections flooring moulding corbelling, champhering watering and curing etc.including cost,conveyance,royalties and all taxes of all materials and cost of all labouir with T&P required for the work etc.complete in all respect as per direction of Engineer-in-charge.Ground Floor
71st Floor
8Providing Reinforcement cement concrete (1:1½:3) mix with nominal size stone aggregate in foundation upto a depth of 1.5m below ground level & upto bed level including cost & conveyance of all materials to site & all labour charges complete as per the direction of Engineer in Charge.(Foundation, Column Base)
9Plinth beam
10Lintel Ground Floor
11Chajja Ground Floor
12Column & beam Ground Floor
13Head Room 1st Floor
14window seals Ground Floor
15Stair Case Ground Floor
16Roof Slab Ground Floor
17Providing HYSD bar reinforcement for R.C.C. work including Straightening, cutting, bending, binding, welding, tying the grills, laying and placing in proper position as per approved design and drawing including cost, conveyance of 18 to 20 gauge binding wire cost and conveyance of HYSD bars complete in all respect as per specification for road & Bridge and direction of Eng - in Charge.Ground Floor
1816mm(5/8\\") thick cement plaster (1:6)in finished smooth to inside rough surface of 10\\" thick brick walls after racking out the joints including watering and curing with cost, conveyance, royalty, all tax of all materials and cost of all labour with T&P required for the work etc. complete. as per the direction of Engineer in Charge. Ground Floor
191st Floor
20Finishing surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. Ground Floor
211st Floor
2212mm(1/2\\") thick cement plaster (1:6)in finished smooth to outside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge.Ground Floor
231st Floor
2420mm thick cement plaster in cm (1:4) for Grading plaster with all cost conveyancy Royality etc. complete.Ground floor
25Fixing Kota tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.Ground Floor
26Fixing Kota tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.Ground Floor
27Fixing chequred tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. Ground Floor
28Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. Ground Floor
29Supplying Fitting & fixing of steel shutter including cost of all materials etc. complete as per the direction of Engineer in Charge.Ground Floor
30First Floor
31Supplying,fitting and fixing of M.S. collapsable gate made out of gate channel 20x5 mm flat h.gutkha,washer including all cost conveyance taxes etc. complete. (prevaling lowest local market rate and excluding labour for fixing ) Ground Floor
32Supplying, fitting and fixing of 32mm thick flush door shutter withapproved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete.(Rate as per SoR 2022, Page-234) Ground Floor
33Labour charges for fitting and fixing of M.S. doors & windows as per approved design including cost of screw etc.complete but excluding cost of M.S.windows grills as directed by the Engineer-in-charge. Ground Floor Door,Window, grill
34First Floor a) Door,Window, grill
35Painting two coats in all floors (Two coats with paints of approved shade and base coat with primer) to new wood and iron work including sand papering,polishing the surface,including cost conveyance royalties and all taxes of all materials alongwith T&P required for the work including cost of paints and primer complete in all respect as per the direction of Engineer in Charge. Ground Floor
361st Floor
37Distempering 2 coats with any approved shade over the interior surface of walls etc.complete as directed by the Engineer-in-charge over a coat of chalk washing using distemper including cost,conveyance of all materials including cost of distemper with all taxes and cost of all labour wikth T&P required for the work etc.complete in all respect etc. complete as per direction of Engineer in charge.Ground Floor
381st Floor
39Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. Ground Floor
40Wall Painting 2 coats with weather coat of approved shade on new work to give an even shade including cost of paint etc. complete as per directionn of Engineer-in-charge Ground Floor
411st Floor
42Priming one coat with any approved primer inculdling primer shade on new work to give an even shade including cost of paint etc. complete as per directionn of Engineer-in-charge Ground Floor
43first floor
44Labour for fixing GCI Sheet in roof, including fixing of ridges in wind ties etc. complete but excluding cost of fitting including drilling holes in wind ties. Ground Floor
45Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018. (Rate as per SoR-2022, Page-233) Ground Floor
46Dressed seasend non sal wood work framed and fixed ( wrought and put up ) in bargan, rafter and posts. Ground Floor
47Supplying fitting ,fixing of ms angle etc. as per specification. Ground Floor
48EI Work :- Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire = Finollex / L & T/ Anchor/ Havels/ V-Guard/ Greatwhite / Polycab) Group A (1.1.1)
49-do- .... Group B (1.1.2)
50-do- .... Group C (1.1.3)
51S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.2 Modular box with base & cover (1.24.2)
528 Modular box with base & cover (1.24.5)
5312 Modular box with base & cover (1.24.6)
54S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4)
55S/F of 6 Modular GI box in recess with suitable size of Modular base cover in front including providing and fixing 2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required.(2X1.25.1+2X1.25.4)+6 MODULE
56S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (1.25.3+1.25.5)+4 MODULE BOX
57S/F of computer board (Modular Type) consisting of 3 nos. of 5 amp plug and switch and 6 amp MCB, Indicator complete with wiring on 12 module M.S.box with B.k.cover(1.24.6 + 3 x (1.25.1+ 1.25.4) + 2.6.1)+Indicator
58Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required ( Make of wire- Finolex/ / Anchor/ Havels/ V-guard / HPL / L&T / Gratewhite / Polycab). -do- 2x1.5sqmm +1x1.5sqmm ( 1.8.1 )
59-do-2x2.5sqmm +1x1.5sqmm ( 1.8.2 )
60-do- 2x4sqmm +1x1.5sqmm ( 1.8.3 )
61-do- 4x6sqmm +2x2.5sqmm ( 1.8.10 )
62Supply, Installation testing and commissioning of 63 Amp. IC TPN Main Switches (IS13940 part 3/1993) with supply of metal box of following capacity on existing surface/Wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make: HPL / L&T / C&S / Havells / Seimens / RK / Anchor / Havells) (2.15.3)
63250mmx300mmx100mm deep(1.24.13) for fixing 63Amp ICTPN Main switch.
64S/F of 100 Amp. T.P.N. Cupper Bus Bar with all connections (Make:-BENLO/Equivalent)
65S/Fof 'C' series SP MCB of 5A to 32 Amp rating 240Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1)
66S/F of 6 way (6+18) TPN MCB DB double door (2.5.6)
67S/F of 63A FOUR POLE MCB C Type ( Make - HAVELLS /Anchor/Greatwhite/L&T)
68S/F of batten holder BK angle holder ISI marked including connection etc instead of ceiling rose (Make: Cona / Anchor / Havells / Greatwhite / Preeti / HPL) (1.29-1.28)
69Earthing with G.I. earth pipe 3 metre long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arragement and watering pipe etc. with charcoal and salt as required.(3.2)
70Supply and laying 6 SWG G.I wire in recess for loop earthing as required ( 3.17)
71S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS)
72S/F of electric step ceiling fan regulater in existing switch box including connection with 1.5sqmm FR PVC insulated single core multistrand copper conductor earthing the regulator as required.(1.25a)
73S/F of Fan hook S'type made of 16mm MS rod as per specificationn
74S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton / Phillips/ HPL/ Polycab / Havells )
75S/F of 45-48 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection ( Make- Crompton/Phillips/HPL/Polycab/Havells )
76S/F of 18-25 watt LED Tube light fitting compoete with all connection. including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL)
77Supply of instalation, Testing commissioning of 12 Watt. LED bulb(Make: Havels / Phillps / Crompton / Polycab / HPL)
78S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12\\" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB)
79S/F of 400mm Wall fan with all accessories and connections (Make-Usha-Maxx Air Ultra/Polycab-Arey HS/Cropmton-WM Hiflowave/ Havells-Accelero HS/ Anchor-Altrix HS- OWH/ Orient-Wall43/ Great White-WYNO WF )
80wiring to sub main with 1*1.5 mm2 single core multi strand copper wire for inverter wiring (1x1.5mm)
81S/F of 2000 VA Inverter with 2 nos. 180 Ah Tubular battery including trally arrangement (Make: Microtake/ Luminous/Exide)
82Supply of 3.5core 25sqmm PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade Armoured cable ( MAKE-HAVELLS/polycab/RR Kable/Rhino cable)
83Laying of 25sq mm. 3½ Core cable on surface(5.5.1)
84Laying of 25sq mm. 3½ Core cable in ground(5.1.1)
85PH Work Supplying all materials,labour,T&P providing and fixing to wall or ceiling and floor GI/PVC pipes conforming to ASTM-D-1785/89 (sch-80)and pipe fitting of the following nominal bore with clamps including making good the wall,ceiling and floor testing all complete as per specification and direction of E.I.C. (a)50mm dia PVC pipe
86(b)32mm dia PVC pipe
87(c)25mm dia C-PVC pipe
88Supplying all materials,labour,T&P and fitting & brass/CP fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and direction of E.I.C. (make- Jaguar) (a)15mm dia CP(SB)Bib cock
89(b)15mm dia CP 2 in 1 Bib cock
90(c)15mm dia CP Pillar cock
91(d)15mm dia CP Angle Stop cock
92(e)15mm dia Health Faucet & 1.0m long Flexible pipe
93(f)50mm dia PVC F.W Metal Valve
94(g)32mm dia PVC F.W Metal Valve
95(h)25mm dia PVC F.W Metal Valve
96(g)15mm dia CP Extension Piece
97(h)15mm dia CP Flange
98Supplying all materials,labour,T&P and fixing of rotational moulded polythene cylindrical water storage tank of 2000ltrs capacity conforming to IS:1570/1996 including cutting holes through the tank & fixing mild steel tubes and fittings and providing extra tubes and jamnuts including hoisting upto a height of 5m above GL and placing the tank on required position&providing masonry staging with 1st class KB brickwork in cm(1:6), of 0.46m ht,12mm CP(1:6),RCC beam of 0.25mx0.30mx2.60m in RCC(1:1.5:3)using 12mm bhg chips including centering & shutering, cutting,bending, binding of rods etc and watering,curing,conveyance of all materials to work site including cost of 2000litres water storege tank etc.
99Supplying all materials,labour,T&P cutting holes through brick/stone masonry works including making good the damages in cm(1:4)for taking GI/PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C.
100Supplying all materials,labour,T&P cutting holes in RCC floors,roofs etc.up to 19cm thick for passing GI/PVC pipes fittings and reparing the holes after insertion of pipe etc. with cc(1:1.5:3)including finishing so as to make it leak proof as per direction of E.I.C.
101Supplying all materials,labour,T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of E.I.C.
102Supplying all materials,labour,T&P and fitting & fixing of 4.0kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.110mm dia PVC pipe
103110mm dia PVC P Trap
104110mm dia PVC S/J/D
105110mm dia PVC D/J/D
106110mm dia PVC Plain Tee
107110mm dia PVC Door Bend
108110mm dia PVC Plain bend
109110mm dia PVC offset
110110mm dia PVC cowl
111125mm dia C.P. Grating
112Supplying all materials labour T&P and fixing water closet,squatting pan(Indian type WC pan/Orissa pattern squatting pan)duly embedded in cc(1:5:10)using 4cm hg metal all complete as per the direction of E.I.C. 580mm Orissa pan(make -Parryware)
113Supplying all materials labour T&P and fixing wash down water closet Anglo Indian water closet)with integralS or P trap to the floor with wooden plug and chromium plated crews including jointing the trap with soil pipe in cm(1:1)etc. all complete as per specification and direction of E.I.C. E.W.C. with S Trap with sheet cover(make -Hindware
114Supplying all materials,labour,T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge. Half stall Urinal with Spreader (Parryware/Hindware/Neycer)
11532mm dia Dome waste
116Supplying all materials labour T&P and providing Fitting and fixing of Aquaguard)Pure Chill 120PSS UV of size 750x570x1350mm height with water storage capacity of 120litres along with 3no. Of faucets 2 for cold water and 1 for normal water including a flow of 1.50ltr/ minute etc all complete as per approved Drawing,specification and direction of E.I.C. Aquaguard pure chill 120PSS UV
117Supplying all materials,labour,T&P and fitting&fixing 10ltr capacity low level flushing cystern with a pair of cast iron or ms brackets complete with fittings such as syphonic arrangements 15mm nominal size brass/ PVC ball valve with polythene float,CP brass handle,union and couplings for connection with inlet,outlet and over flow pipes,32mm dia cp flush bend, 15mm dia.PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cystern and closet and connecting inlet pipe with supply main etc. all connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C. 10Ltr.Capacity low level cistern
118Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per P.H. specification and direction of E.I.C.550mmx400mm WHB with 32mm dia cp west,west pipe,brackets and connection pipe(make- parryware)
119Wall mounted Grab bar 600mm long
120Supplying all materials,labour T&P and fixing standard size CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C.CP Towel Ring make Parryware
121Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixing to wooden plugs with CP screws and washers complete as per PH specification and direction of E IC 600mmx450mm BE Mirror
122Supplying all materials labour T&P and fixing standard size CP soap holder complete with CP Brass brackets fixed to wooden plug with CP screws as per P H specification and direction of E.I.C.CP Soap holder
123Supplying all materials,labour T&P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C. (125x450)mm size glass-shelf with CP Guard rail(make -Parryware)
124Supplying all materials,labour,T&P and cutting holes through brick/ stone masonry walls for taking PVC pipes and fittings including making good the damages etc all complete as per the P.H. specification and direction of E.I.C. 375mm thick wall
125Roof cutting
126Supplying all materials,labour,T&P and providing marble slab in urinal partition wall including cutting grooves in walls and making good the damages including watering curing etc all complete as per specification and direction of the E.I.C.
127Supplying all materials labour T&P and fixing Digital tiles in floors, threads,landing on 25mm thick bed of cm(1:1)jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of precast tiles etc. all complete as per specification and directiof E.I.C.(Ceramic Floor tiles of Premium grade having Thickness 7mm to 8mm confirming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by E.I.C.)
128Supplying all materials labour T&P and fixing porcelain glazed Digital tiles tiles in dados skirting and risers of steps on 12mm thick CP(1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete including cost of tiles etc. all complete as per spcificaiton and direction of E.I.C.(Ceramic wall tiles of Premium grade having Thickness 6.5mm to 6.7mm confirming to IS 13755 of size 25cm x33cm special printed series to be pre-approved by E.I.C.)
129Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member,9201 as top,9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board.and as per direction of the E.I.C.
130Factory made single leaf rigid FRPalternately called GRP)sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UVstabilised Isopthalic Gelcoat and one layer of 450gsm E-glass chopped strand matCSM impregnated with orthopthalic palyester resin.The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS)structural foam panel of 29mm thickness and a density of 20kg/m3 shall be used as core material.Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx 32mm and also necessary salwood reinforcements for fitting the metal fittings such as tower bolts, aldrop,handles etc shall be provided. A structural adhesive compatible with(EPS)foam shall be used for bending the core material,the salwood reiforcements and the skins.The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS:4020-1998.The finish of door shutter will be plain colour white/Ivory/Beige/Light grey/Mahogany/Teak wood or any other colour using high quality pigments.Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. Frame:-
131Shutter
132S.D. PORTION- Supplying all materials labour T&P and laying PVC pipe sewer line, Grade-A of the following internal dia in trenches(to level or slope)and jointing with gasket & stiff mixture or cm1:1,cc1:3:6 with 40mm size hg metal on bed of the trench and hunching or allround concrete encasing with cc1:4:8using 40mm size hg metal including curing, conveyance to worksite,payment of royality,taxes etc. and testing all complete as per approved drawing,specification and direction of E.I.C.110mm dia PVC pipe with allround Hunch top
133Supplying all materials labour T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB brickwork in cm(1:6)moulding&shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flush pointing (1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size hg chips with RCC manhole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing,conveyance of all materials to site,payment of royality,taxes etc.all complete as per approved specification and direction of E.I.C.Inside size 760mmx760mmx460mm
134Supplying all labour T&P and constructing soakwaypit of the following sizes with dry brick walling from bottom upto invert of inlet pipe & 1st class KB brickwork in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside&outside over masonary brickwork,gravel packing in the rear of well steining RCC cover slab in cc(1:1.5:3)using 12mm size hg chips fitted handles including e.w. in openwell excavation in all kinds of soil and refilling the cavity around the pit & painting the iron work, watering,curing,conveyance of all meterail to worksite,payment of royality,taxes etc. all complete as per approved drawing,specification and direction of E.I.C. 1.20m dia x 2.00m deep
135Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of E.I.C. Initial lift upto 1.50m
136From 1.50m to 3.00m depth
137Supplying all materials labour T&P and filling foundation and plinth with river sand well watered and rammed including conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per the direction of E.I.C.
138Supplying all materials labour T&P and providing cc(1:3:6)using 4cm hg metal including watering,curing,conveyance of all materials to work site,payment of royality,taxes etc.all complete as per specification and direction of E.I.C.
139Supplying all materials labour T&P and providing cc(1:1.5:3)using 12mm hg chips including watering,curing,conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.
140Supplying all materials labour T&P and providing Flyash Brick work in cm(1:4)F&P having crushing strength not less than 75kg/cm2 with dimensional tolerance +/-8%including watering,curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C.
141Supplying all materials labour T&P and providing rigid & smooth centering & shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C
142Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20gauge conveyance of all materials to work site,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.
143Supplying all materials labour T&P and providing RCC(1:1.5:3) using 12mm hg chips for RCC works including hoisting,laying,watering, curing,conveyance of all materials to work site,payment of royality, taxes etc. all complete as per specification and direction of E.I.C.
144Supplying all materials,labour T&P and providing 12mm thick CP(1:3) with punning on brick/ stone work including watering,curing conveyance of all materials to work site, payment of royality,taxes etc. all complete as per specification and direction of E.I.C.
145Supplying all materials labour T&P and fixing MS step iron in 12mm dia MS steel bar and fixing into walls of septic tank duly embedded in cc(1:3:6)all complete as per PH specification and direction E.I.C.
146Supplying all materials labour T&P and fixing of RCC baffle wall precast with cc(1:1.5:3)using 12mm bhg chips and fitted to septic tank as per P.H. specification and direction E.I.C.
147Supplying all materials,labour, T&P and providing fitting&fixing PVC Tee in wall including fitting the necessary with cc(1:1.5:3) with 12mm size hg. chips all complete including watering,curing,conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C.
148Supplying all materials labour T&P and Providing cement flush pointing (1:3)to brick masonary including watering,curing,conveyance of all materials to worksite etc. all complete as per specification and direction of E.I.C.
149Supplying all materials labour T&P and providing 500x500x100mm thick RCC precast MH cover in cc(1:1.5:3)using 12mm hg chips placing the cover on the MH/S tank & finishing smooth all complete as per specification and direction of E.I.C.
150Filling in F&P with excavated materials including watering and ramming as per direction of E.I.C.
151200mmx150mm Size Bore Well Through DTH Method:- Labour for drilling of perfactly vertical bore holes as specified dia. For a specified depth below GL through consolidated&uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm/ 200psi)as required to suit the site conditions as per the direction of E.I.C. including use of own rigs with its accessories,tools & plants and consumable etc. for lowering 125mm dia PVC/GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft, medium,hard & boulder formation(PCV/GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after complete of tube well.(Tube well-1No). Drilling of 125mm. dia. Bore-0.00mtr to 44.40mtr
152Drilling 100mm dia. Bore-44.40mtr to 100.00mtr
153Lowering the following G.I/PVC pipe with or without soltted pipes as per necessity from GL upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above (PVC/G.I) supplied by the contractor (including cost of pipe). Lowring of 125mm dia pipes-0.00mtr to 44.40mtr
154Cost of 125mm dia PVC casing pipes-0.00m to 45.00m
155Cleaning&developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C.
1561.00HP Single Phase Submersible Pump Set Supplying of ISI mark 1.00HP single phase vertical submersible pump set (3 Stage head of 20 to 35mtr) with discharge of 1200-1800 ltr/hour and a head of 75-90mtr of reputed make like KSB/Texmo & equivalent including all cost,conveyance and taxes etc all complete as per direction of E.I.C.
157Supplying all labour,T&P and fitting and fixing of 1.00HP single phase vetrical submersible pump set with commissioning and testing etc.all complete as per direction of E.I.C.
158Supplying fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost,conveyance of all taxes etc all complete as per direction of the E.I.C.
159Supplying all materials labour T&P and fitting & fixing of 2.5mm2 3core copper flat suitable cable having ISI mark of reputed company like BCH/ Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C.
160Supplying fitting and fixing of plastic rope MS Well cover,MS Clamp, stainless steel short piece,bend & socket including all cost,taxes etc all complete as per direction of the E.I.C.
161Supplying fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58528392
AUTHORITY Government Departments
TENDER VALUE 1.44 Crore
LAST DATE 25-11-2026
Authority
Authority Name Rural Works Department
Work Description Tender for Construction Of Up-Graded Higher Secondary School At Bapuji Govt. High School Building Daincha Under Naktideul Block In The District Of Sambalpur For The Year 2025-26
Basic Detail
Tender No ROAD TENDER ONLINE RWCSBP-29 OF 2026-27
Bidding Type Tender
Location
City Sambalpur
State Odisha
Key Dates
Publish Date 14 Nov 2026
Submission Date 25 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 1.44 Crore
Tender Fee 10000
EMD 1.44 Lakhs
Exemption Available
Document List
2984d125-fe6f-4aa1-9a55-eefdbd298b08.html
BOQ_620765.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

2984d125-fe6f-4aa1-9a55-eefdbd298b08.html

xls

BOQ_620765.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender