Tender For Repair And Renovation Work Of Various Swimming Pools In Non Residential Buildings Under Public Health Division No.3, Chandigarh.(Ch To: 2215 (N.P) Nrb )
Tender Value
8.78 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
10 days left
EMD
17560
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Work Of Various Swimming Pools In Non Residential Buildings Under Public Health Division No.3, Chandigarh.(Ch To: 2215 (N.P) Nrb )
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level |
| 2 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 3 | 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 5 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 6 | Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% andconforming to IS: 15622, of approved make, in all colours and shades,laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointingwith grey cement slurry @ 3.3 kg/ sqm including grouting the joints withwhite cement and matching pigments etc., complete.Size of Tile 600x600 mm |
| 7 | 12 mm cement plaster of mix : |
| 8 | 1:4 (1 cement: 4 fine sand) |
| 9 | Finishing walls with water proofing cement paint of required shade : |
| 10 | New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 12 | Two or more coats on new work |
| 13 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 14 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 15 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 16 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 17 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 18 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 19 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 20 | For thickness of tiles 10 mm to 25 mm |
| 21 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 22 | Extra rate for providing chequred vitrified tiles made specially for Swimming Pool |
| 23 | Dismantling of G.I pipe upto 50mm dia. And taking out the pipes,manually or mechanical means including stacking of pipes with in 50m lead and reconditioning the surface as per direction of EIC as per requirement |
| 24 | Dismantling of tile work in wall laid in cement mortar including chaising of existing base plaster |
| 25 | Providing and fixing of Pool Accessoriers made of good quality ABS Plastic of make Waterco or equivalent to the satisfaction of EIC |
| 26 | ABS Return Inlet |
| 27 | Wide Mouth Skimmer |
| 28 | Providing and fixing of UPVC Specials ( Heavy Duty ) complete with cost of solvent and fixing to the satisfaction of EIC |
| 29 | NRV 63 mm dia |
| 30 | NRV 90 mm dia |
| 31 | Ball Valve 63 mm dia |
| 32 | Ball Valve 63 mm dia |
| 33 | Union 63 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender