Public Administrative Department Local Bodies Closing in 5 days TDR #58527767

Tender For Provision Of Public Toilet At Urban Health And Wellness Centre (Uhwc), Multipurpose Complex Village Badheri, U.T., Chandigarh.

Issued by Local Bodies · Chandigarh, Chandigarh
Tender Value
20.01 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
5 days left
EMD
40014
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Provision Of Public Toilet At Urban Health And Wellness Centre (Uhwc), Multipurpose Complex Village Badheri, U.T., Chandigarh.

BOQ

Name of Work:- Provision of Public Toilet at Urban Health and wellness Centre (UHWC), Multipurpose Complex Village badheri, U.T., Chandigarh.
Sl. No. Item Description
1Dismentaling of doors, M.S window and clerestory window (steel/wood) shutter including chowkhats architrave,holdfast etc. complete and stacking within 50 metre lead
2Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material anddisposal of unserviceable material within 50 metres lead.DSR 15.25
3Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
4Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level: 1:5:10 ( DSR 4.1.10)
5Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: 1:1.5.3( 1 Cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).
6Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 6.1.2)
7Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).DSR 4.10
8Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement: 6 coarse sand) DSR 6.4.2
912 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) complete in all respect to the entire satisfaction of the Engineer in charge.(DSR 13.1.1)
10Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete in all respect to the entire satisfaction of Engineer-in-Charge.
11Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. DSR 11.37
12Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm. DSR 8.2.2.2
13Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. DSR 8.3.1
14Removing dry or oil bound distemper water proffing cement paint and the like by scrapping sand parering and preparing the surface smooth including necessary repairs to scratches etc. complete (DSR : 14.46)
15providing and applying JK putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (DSR 13.26)
16Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including priming coat with cement primer:- (DSR 13.41.1)
17Pointing on brick work or brick flooring with cement mortar 1:3 (: 1 cement : 3 fine sand) ( Flush/Ruled/Stuck or weathered pointing )(DSR 13.31.1)
18Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). (DSR 13.46.1)
19Providing and fixing SS railing with circular handrail of dia 35-45 mm at two levels i.e. 700 mm and 900 mm respetively, should extend 300mm and 450 mm after the stair ramp runs in staircase.
20High Density Chequered Tiles 25mm thick of Minimum 300mm x 300mm size of approved design and any colour by Engineer Incharge of NTC, NITCO, Sham Tiles make , jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 15 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) :
21Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) For fixed portion 21.1.1.2
22For shuters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provisions for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for seperately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15 powder coated aluminium (minimum thickness of powder coating 50 micron)
23Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board confirming to IS: 12823 grade 1 type 11, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass/ stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge prelaminated particle board with decorative lamination on both sides
24Providing and fixing glazing in aluminium dorr, window, ventilator shutter and partitions etc. with PVC/necprene gasket etc. complete as per the architectural drawing and the direction of Engineer-in-charge (cost of aluminium snap beading shall be paid in basic item) with flot glass panes of 5.50mm thickness) draiwng and the direction of Engineer-in-charge (cost of aluminium snap beading shall be paid in basic item) with float glass panes of 5.50mm thickness
25Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board
26Providing and fixing of lay-grid false ceiling consisting of ceilling tiles Armstrong Woodworks SL2 edge Suspended Ceiling System with ARMSTRONG 24 MM GRID or equivalent as per approved sample of tiles with visual pattern R3 perforation with approved laminate (US Maple, Royal Cherry, Dark Walnut, Maple) / Wood Veneer (Maple, Dark Bamboo, Red beech, US Cherry) finish would have an NRC of 0.5, Humidity Resistance (RH) of 90%, Fire Performance Class 1(BS - 476) in module size of 600mm x 600mm x 12mm and density of 830 Kgs/M3 lay-in-modular grid/ suspension system ( hot dipped galvanized steel) of standard T-Section having its flanges face powder coaed colour white suspended from ceiling and secured with clips and G.I. etc with following details.
27(a) Main runners shall be T-Shaped section with single rotary stitching of size 24mm x 36 mm and 3600mm long
28(b) Cross runners shall be T-Shaped double rotary stitching of size 24mm x 26mm and 1200mm long.
29Cross runner T-Section of 24mm x 26mm and 600mm long. The frame work comprises of main gunners spaced at 1200mm centre to centre shall be securely fixes to the structural soffits by approved hangers at 1200mm maximum centres. The hangers (G.I. wire of 4mm dia) to be fixed by means of roof plug, level adjuster and screws etc. Flush fittiing 1200mm long cross tees (with double stitching) to be interlocked between main runners at 600mm centre ti firn 1200 x 600mm modules. Cut cross tees longer that 600mm to be supported independently to form 600x600mm modules. The complete work shall include the cost of all material and labour and lead and fit complete and to the entire satisfaction of Engineer-in-Charge.
30Size 595x595mm
31Public Health WorkProviding and fixing white viterous china pedestal type water closet (Ruropean type W.C. pan) with seat and lid, 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 8231, with all fitings and fixtures complete, including cutting and making good the wall and floors wherever required
32Providing and fixing wash basin with C.I brackets, 15mm C.P brass pillar taps, 32 mm C.P brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever require.
33Providing and fixing 8mm dia C.P/S.S jet with flexible tube upto 1 meter long with S.S triangular plate to Eureopean type W.C of quality and make as approved by Engineer-in-Charge
34Providing and fixing C.P brass stop cook (concealed) of standard design and of approved make conforming to IS:8931
35Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitings and the base support for tank.
36Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete. Semi rigid pipe 32 mm dia
37Providing and fixing PTMT ball cook of approved quality, colour and make complete with Epoxy coated aluminium road with L.P/H.P.H.D plastic ball.
3825 mm nominal bore, 152mm long, weighing not less than 440 gms
39Providing and fixing white viterous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P brass spreaders with brass union and G.I clamps complete, including paintings of fitting and brackets, cutting and making good the walls and floors wherever reuired.Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931
4015mm nominal boreProviding and fixing C.P brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
4115 mm nominal bore
42Providing and fixing uplasticised PVC connection pipe with brass union: 45cm length 15mm nominal bore
43Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular size-453x357mm.
44Providing and fixing soil, waste and vent pipes
45100mm diameter
46Sand cast iron S&S pipe as per IS: 1729
4775mm diameter
48Sand cast iron S&S pipe as per IS: 1729
49Providing and fixing collar: 100mm
50Sand cast iron S&S as per IS-1729
5175 mm diamater
52Sand cast iron S&S as per IS-1729
53Providing Drip seal joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of dia
54100mm
55Providing and fixing plain bend of required degree
56100mm diameter
57Sand cast iron S&S as per IS-1729
5875mm diameter
59Sand cast iron S&S as per IS-1729
60Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide minimum distances of 37mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88gms
61Providing and fixing G.I pipes complete with G.I fittings and clamps, i/c making good the walls etc concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15mm dia nominal bore
62Providing and fixing G.I pipes complete with G.I fittings including trenching and refilling ets: External work
6325mm dia nominal bore
64Making chases up to 7.5x7.5cm in walls including making good and finishing with matching surface after housing G.I pipe etc
65Providing and fixing gun metal gate value with C.I wheel of approved quality (screwed end)
66Providing and fixing brass garting of approved quality and colour
67Circular type: 100mm nominal dia
68Providing and fixing square-mouth S.W gully tarp class SP-1 complete with C.I garting brick masonary chamber with water tight C.I cover with frame of 300x3000mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not les than 2.70 kg as per standard design
69100x100mm size type
70Constructing brick masonary chamber for underground C.I inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C top slab with 1: 1.5: 3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on wallas and bed concrete etc. complete as per standard design Inside dimensions 455x610mm and 45cm deep for single pipe line
71with common burnt clay F.P.S (non-modular) bricks of class designation 7.5
72Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
73Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. ocmplete.
74200mm diameter S.W. pipe
75Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: ( 1 Cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all round S.W pipes including bed concrete as per standard design.
76Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: ( 1 Cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size).
77Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level:
781:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate ) 20 mm nominal size.
79Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand)
8012 mm cement plaster finished with a floating coat of neat cement of mix
811 : 4 (1 cement : 4 fine sand)
82Providing orange colour safely foot rest of minimum 6mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mmX25mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30X20X15 cm cement concrete block 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) complete as per design.
83Centering and shuttering including shrutting, propping etc. and removal of form for
84suspended floors, roofs, landings, balconies and access platform.
85Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 1.5 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1 :1.5 : 3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size)
86Steel reinforcement for R.C.C work including straightening, cutting, bending, placingin position and binding all complete upto plinth level. Thermo Mechanically Treated bars of grade Fe-500D or more.
87Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality
88Circular shape 560 mm internal diameter
89Making connection of drain or storm line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1cement: 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete
90For pipes 100 to 250 mm diameter
91Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
92Approx 40% of total excavation as per quantity No. 1
93Carriage of material by mechanical transport including loading, unloading and stacking
94Approx 60% of total excavation as per quantity No. 1
95Providng and fixing of CP extension of size 15mm. heavy Duty complete in all respect.
96Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same material with fittings of approved quality and colour, weighing not less than 105 gms
97Providing and fixing toilet paper holder CP brass
98Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with neccessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangements as per approval of Engineer-in-charge.9for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
99Providing and fixing of Crompton Greeves 1 HP wapter pump with help of fasteners to be fixed at site as per entire satisfaction of Engineer in charge
100ElectricalSupply and fixing of screw type lamp holder for installation of screw type LED. The work shall be executed to the entire satisfaction of Engineer in charge.
101Supplying and fixing suitable size Gl box with modular plate and cover in FRLSont on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch connection etc. as required
102Supply and fixing of 9 watt screw type LED bulb. The work shall be executed to the entire satisfaction of Engineer in charge
103PVCCON S/F PVC Conduit:Supplying & Fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. The work shall be executed to the entire satisfaction of Engineer in charge. (25mm)
104Point wiring in PVC conduit, with modular type switch:
105Wiring for light point/fan point/exhaust fan point/ cal bell point with 1.5 sq.mm. FR PVC insulted copper conductor single core cable in surface/ recessed PVC Conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc as required Group C
106Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/5 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
107Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm+1X1.5 sq. mm earth wire
108Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 x 2.5 sq. mm +1 x Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58527767
AUTHORITY Local Bodies
TENDER VALUE 20.01 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Municipal Corporation
Work Description Tender for Provision Of Public Toilet At Urban Health And Wellness Centre (Uhwc), Multipurpose Complex Village Badheri, U.T., Chandigarh.
Basic Detail
Tender No MCC/R1/2026/158
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 14 Nov 2026
Submission Date 23 Nov 2026
Open Date 23 Nov 2026
Finance
Tender Value 20.01 Lakhs
Tender Fee 3000
EMD 40014
Exemption Not Available
Document List
2badbb18-f28f-4a06-83ff-8358f435519d.html
BOQ_119154.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

2badbb18-f28f-4a06-83ff-8358f435519d.html

xls

BOQ_119154.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender