Tender For Establishment Of Environmental Laboratory For Leachate And Inert Waste Testing By Procurement And Installation Of Laboratory Equipment (Along With Associated Civil, Electrical & Portacabin Works) At Dumping Ground, Dadumajra, Chandigarh (C
Tender Overview
Project Description
Tender for Establishment Of Environmental Laboratory For Leachate And Inert Waste Testing By Procurement And Installation Of Laboratory Equipment (Along With Associated Civil, Electrical & Portacabin Works) At Dumping Ground, Dadumajra, Chandigarh (Ch. To: Solid Waste Management Capital) Approx. Amount: Rs. 141.68 Lakh ; Earnest Money: Rs. 2,83,366/- ; Time Limit: 04 Months;
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Installation, Testing and Comminssioning of pH Meter (Brand: Hanna Instruments / Hach / Thermo Scientific (Eutech)) along with perticular specification in section -III, Clause 17A (L) as per entire satisfaction of EIC |
| 2 | Supply, Installation, Testing and Comminssioning of Conductivity/ TDS MeterBrand: Hanna Instruments / Hach / Thermo Scientific (Eutech) along with perticular specification in section -III, Clause 17A (L) as per entire satisfaction of EIC |
| 3 | Supply, Installation, Testing and Comminssioning of Vacuum Filtration AssemblyBrand: Mettler Toledo , Advantec / Sartorius / Cytiva Whatman Glass Filtration ) Assembly for 47mm Membranes w/PTFE along with perticular specification in section -III, Clause 17A (L) as per entire satisfaction of EIC |
| 4 | Supply, Installation, Testing and Comminssioning of Analytical Balance with Printer ( Brand: Mettler Toledo / Sartorius / Shimadzu) along with perticular specification in section -III, Clause 17A (L) as per entire satisfaction of EIC |
| 5 | Supply, Installation, Testing and Comminssioning of HOT AIR OVEN Brand: (NSW / Thermo Fisher Scientific / Labocon) along with perticular specification in section -III, Clause 17A (L) as per entire satisfaction of EIC |
| 6 | Supply, Installation, Testing and Comminssioning of BOD INCUBATOR( Brand: Remi / Thermolab / Bionics Scientific) along with perticular specification in section -III, Clause 17A (L) as per entire satisfaction of EIC |
| 7 | Supply, Installation, Testing and Comminssioning of DO Meter Brand: Hanna Instruments / Hach / Thermo Scientific (Eutech) along with perticular specification in section -III, Clause 17A (L) as per entire satisfaction of EIC |
| 8 | Supply, Installation, Testing and Comminssioning of COD Reactor and Spectrophotometer Brand: Lovibond / Hach / Merck along with perticular specification in section -III, Clause 17A (L) as per entire satisfaction of EIC |
| 9 | Supply, Installation, Testing and Comminssioning of FLAME ATOMIC ABSORPTION SPECTROPHOTOMETER (FAAS) WITH COLD VAPOUR ACCESSORY Brand: PerkinElmer / Agilent / Shimadzu / Agilent / Shimadzu along with perticular specification in section -III, Clause 17A (L) as per entire satisfaction of EIC |
| 10 | Supply, Installation, Testing and Comminssioning of High Performance Muffle Furnace 1000°C Brand: Nabertherm / Carbolite Gero / NST along with perticular specification in section -III, Clause 17A (L) as per entire satisfaction of EIC |
| 11 | Supply, Installation, Testing and Comminssioning of Bomb Calorimeter Brand: Toshniwal / Parr Instrument / Labindia along with perticular specification in section -III, Clause 17A (L) as per entire satisfaction of EIC |
| 12 | Construction of Porta Cabin Supply, installation, testing & commissioning of Powder Coated Galvanized Iron (PCGI) Wall partitions Panels SPECIALISED FOR CLEAN ROOM. TECHNICAL AS PER CLEAN ROOM STANDARDS.* Infill :Puff having density 40+2 Kg M3.* MOC: PCGI* Finish: Powder Coated* Sheet Thickness:0.6 MM |
| 13 | 50 MM Thick Wall Panels |
| 14 | 50 MM Thick Ceiling Panels |
| 15 | Metal Door: Door Shutter 44 mm thick made up of 0.8 mm thick GPSP Galvanised Sheet to be powder coated to 70-60 microns to be Insulated with Infill Honeycomb. Door frame made up of 1.2 mm thick GPSP Galvanised Sheet to be powder coated to 70-60 microns. Standard JAMB Size 80*50 mm.Doors have hardware as :*SS 304 B2B Hinges Size 4\\"X 3\\"X 3 mm,*Dead Lock Set,*Handle SS 304 250X16mm,*Standard Arm Door Closure,*Double Glazed View panel size 600 x 400 mm having 5.0mm thick Toughened Glass with silica gel and made all joints airtight with sealant,* Drop Seal* Kick Plate |
| 16 | Single Leaf Door Size : 900 X 2100 MM |
| 17 | Flashing |
| 18 | Aluminium Coving |
| 19 | 3D/2D Corners |
| 20 | C - CHANNEL |
| 21 | Aluminium Truss with complete hanging arrangements |
| 22 | View Panel Size : 1000 X 1000 MM |
| 23 | Electrical Conducting |
| 24 | SILICON |
| 25 | LED CEILING LIGHT 40W |
| 26 | Electrical Wiring |
| 27 | 6 module plate with 6 switch |
| 28 | 3 module plate with 6/16amp switch & socket |
| 29 | Lab Furniture1. Construction of Cabinet: The construction of lab storage cabinet shall be welded only so as to achieve the product durability, rigidity and longevity. There should be an independent storage module and there should be no common wall shall be used while placing two storage modules together. The body is made out of 1mm CRCA sheet and base frame 1.2 mm CRCA and Door and drawer shall be in sandwich construction. The outer sheet thickness of drawer and shutter front fasica shall be 1mm and inner sheet thickness shall be 0.8mm CRCA sheet (Make: TATA/ SAIL) and filled with sound defining material. For 900 mm height lab table the Bottom C-frame of the storage cabinet shall be 169mm high x 480mm wide made of 1.2 mm CRCA sheet and provided with nylon level adjusters. And for 750mm height lab table the Bottom C-frame of the storage cabinet shall be 30mm high x 480mm wide made of 1.2 mm CRCA sheet and provided with nylon level adjusters. All leg o knee space shall be provided with back full height cover made of 0.8mm thick CRCA sheet.The cutting and bending of the storage cabinets, doors, reagent rack shelf and vertical supports etcl is being done on high quality CNC machines so as to achieve precision and complete interchangeability of components. Steel welding wherever required, is to be done by MIG welding process to minimize distortion and for the deep penetration of the weld. All the steel components are pre-treated for de-greasing, de-rusting and phosphating. After proper pre-treatment, the steel components are epoxy powder coated and oven baked at temp. above 200 deg. C to provide scratch resistance surface coating film of thickness 70-80 microns. |
| 30 | Earthwork Earth work in excavation by Mechanical means ( Hydraulic excavator) manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and remming of bottoms,lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within lead of 50m. (DSR 2.8.1)Volume calculation = 30'x20'x1.5' = 900 cft = 25.48 cum |
| 31 | GSB - Providing and laying granular sub base by providing and laying, spreading and compacting course graded sub base material sand , morrow, graval, crushed stone of combination thereof confirming to grading –II of table 400.2 of MORTH specification (latest revision as on date). The material shall be mixed by mix in place method or with motivator at OMC and carried to site, spread in uniform layers and compacted with 8-10 tones smooth heeled/Vibratory roller to achieve desired density. Complete in all respect as per clause 401 of MORT&H specification (latest revision as on date)30'x20'x1' = 600 cft or 16.99 cum |
| 32 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).(DSR : 4.1.3) 30'x20x 0.5 '= 300 cft or 8.49 cum |
| 33 | Providing and laying in position machine batched, machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/cum excess/ less cement used as per design mix is payable/ recoverable separately). (NOTE- 1) Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately) All works upto plinth level.Concrete of M25 grade with minimum cement content of 330 kg /cum (DSR 5.33.1.1) 30'x20x 0.5 '= 300 cft or 8.49 cum |
| 34 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 19.4.1.1 |
| 35 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR : 19.30) |
| 36 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter (DSR : 19.1.1) |
| 37 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe (DSR : 19.2.1) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender