Water Resources and Irrigation Boards / Undertakings / PSU Closing in 22 days TDR #58527254

Tender For E-Tender For Providing Paver Block Road Along With Led Poles And Lights To Connect Existing Road With Gate No. 3 Alongwith Providing Security Room And Renovation Of Existing Gates At 220Kv Sub-Station, Bbmb, Jamalpur

Issued by Boards / Undertakings / PSU · Ludhiana, Punjab
Tender Value
19.88 Lakhs
Estimated cost
Bid Submission
14 Dec 2026
22 days left
EMD
20000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ludhiana → Punjab
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for E-Tender For Providing Paver Block Road Along With Led Poles And Lights To Connect Existing Road With Gate No. 3 Alongwith Providing Security Room And Renovation Of Existing Gates At 220Kv Sub-Station, Bbmb, Jamalpur

BOQ

Name of Work:- E-Tender for Providing Paver Block Road along with LED Poles and Lights to connect existing road with Gate No. 3 alongwith providing Security Room and Renovation of existing Gates at 220kV Sub-Station, BBMB, Jamalpur
Sl. No. Item Description
1Clearing grass and grubbing road land – Clearing grass and grubbing road land including uprooting rank vegetation bushes shrubs sapling and tree girth uoto 300 mm removal of stumps of trees cut earlier and disposal of unserviceable matter up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical clause of 201 of MORT & H Specifications A. IN AREA OF LIGHT JUNGLE (MANUAL MEANS) CSR Ref. 24.2 A
2Construction of embankment with good quality earth obtained from borrow pit-Construction of embankment with good quality earth obtained from borrow pit including compensation earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications CSR Ref. 24.5 a
3Earthwork in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. CSR Ref. 6.6
4Compacting original ground below Embankment- Loosening, levelling and compacting original ground below embankment to facilitate placement of first layer of embankment, scarified to a depth of 150mm,mixed with water at OMC and then compacted by rollings as to achieve minimum dry density as given in Table 300-2 for embankment construction as per technical clause 305 of MORT&H specifications CSR Ref. 24.4 b
5Granular sub base – Construction of granular sub base by providing material, spreading in uniform layers with motor grade on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory rollers to achieve the desired density complete as per MORD technical specification CSR Ref. 24.7 (AOR)
6Wet Mix Macadam-Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material withwater at OMC in mechanical mix plant, laying in uniform layers with paver in sub- base / base course on well-prepared surface and compacting with vibratory roller to achieve the desired density complete as per technical clause 406 of MORT&H specifications CSR Ref. 24.13 (AOR)
7Providing and Laying 60 mm thick factory made cement concrete interlocking paver blocks of M-35 grade manufactured by Block making Machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63-2014 and of approved size and design /shape laid in ordinary grey colour and pattern over and including 40mm thick compacted bed of Coarse Sand, filling the joints with fine sand extra all complete as per direction of Engineer-in-charge CSR Ref. 14.138 (AOR)
8cement concrete toe wall 1.2.4 (Toe wall structure) (a)with stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type CSR Ref. 10.13 (a) (ii)
9Cement concrete 1:5:10,(b) With stone aggregate 40mm gauge (ii) Mixed by mechanical mean using concrete mixer volumetric type CSR Ref. 10.9 (b) (ii)
10Shuttering for faces of concrete foundations and foundation beam & plinth beam CSR Ref. 9.1
11Steel work fixed independently without connecting plates including cutting hoisting and fixing in position (c) Tees angles & channels CSR Ref. 18.1 (c) (AOR)
12Welding by gas or by electric plant, including carriage to and from workshop etc. (Tees angles & channels) CSR Ref. 18.28
13Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint CSR Ref. 16.18
14GI PIPE POLES & BRACKETS: GI PIPE POLES:Supply and erection of G .I pipe A quantity of suitable length and dia confirming to is 1239 part 1 1979 including fixing upto given depth below G/L the hole of excavation about 30 cm dia .and given depth to be filled in upto 15 cm below G/L with 1.2.4 cement concrete including painting of pole with two coats of approved aluminium paints as required – (ii)G.I Pipe pole 6.1 m long dia 80 cm planting depth 120 cm with pit depth 135 cm CSR Ref. 34.29 A (ii)
15SINGLE ARM BRACKETS FOR GI PIPE POLE:(i) Supply and erection of GI pipe 40 mm dia (a class) single arm bracket of suitable length give a total overhang at tentative angle of 100 /105 degree, the bracket should be fixed on the top of GI pipes pole having top outer dia 80 mm/ 100 mm with GI reducer of suitable size with two coats of an approved aluminium paint complete in all respect as approved by the engineer in charge at site –(a)Single arm bracket 1 meter long with GI reducer 80 mm x 40 mm CSR Ref. 34.29 B (i) (a)
16Providing and Laying 80 mm thick factory made cement concrete interlocking paver blocks of M-40 grade manufactured by Block making Machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63-2014 and of approved size and design /shape laid in ordinary grey colour and pattern over and including 40mm thick compacted bed of Coarse Sand, filling the joints with fine sand extra all complete as per direction of Engineer-in-charge CSR Ref. 14.139(AOR)
17Home shop solar light outdoor home garden street 400 W AUTOMATIC Night lamp outdoor motion sensor waterproof LED for walls, yards, road (15000 mAh, cool white, ABS) NSI
18Portable Cabin 6 Feet Long FRP, cabin width 8 ft, door width 2.5 ft, cabin length 6 ft, cabin heigh 7 ft , no. of window 2 (other technical specification of Portable Cabin as per annexure-A) NSI Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58527254
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 19.88 Lakhs
LAST DATE 14-12-2026
Authority
Authority Name Bhakra Beas Management Board
Work Description Tender for E-Tender For Providing Paver Block Road Along With Led Poles And Lights To Connect Existing Road With Gate No. 3 Alongwith Providing Security Room And Renovation Of Existing Gates At 220Kv Sub-Station, Bbmb, Jamalpur
Basic Detail
Tender No 12/2026-27
Bidding Type Tender
Location
City Ludhiana
State Punjab
Key Dates
Publish Date 14 Nov 2026
Submission Date 14 Dec 2026
Open Date 15 Dec 2026
Finance
Tender Value 19.88 Lakhs
Tender Fee Ref. Documents
EMD 20000
Exemption Not Available
Document List
BOQ_346995.xls
db1f64b7-52f6-4588-a911-e9a0ed249a38.html
DNIT.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 14, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 22 days
Dec 15, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 23 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_346995.xls

html

db1f64b7-52f6-4588-a911-e9a0ed249a38.html

pdf

DNIT.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender