Housing Urban and Rular Development Government Departments Closing in 0 days TDR #58526885

Tender For annual repair & maintenance of To 252 Da Flats At Hari Nagar, New Mahavir Nagar Under Sub-Division Wb-14 New Delhi, During 2026-27. (Sh:-Change Of Tenancy And Internal Finishing Work In Occupied Flats And Other miscellaneous Civil Works).

Issued by Government Departments · Delhi, Delhi
Tender Value
72.78 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
0 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for annual repair & maintenance of To 252 Da Flats At Hari Nagar, New Mahavir Nagar Under Sub-Division Wb-14 New Delhi, During 2026-27. (Sh:-Change Of Tenancy And Internal Finishing Work In Occupied Flats And Other miscellaneous Civil Works).

BOQ

Name of Work:- AR & M/O to 252 DA Flats at Hari Nagar, New Mahavir Nagar under Sub-Division WB-14 New Delhi, during 2026-27. (SH:-Change of Tenancy and Internal finishing work in occupied flats and other misc. civil works).
Sl. No. Item Description
1Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
2Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
330 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
4Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete
525 mm dia
6Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel chromium plating grade 1 as per IS: 1068 and fixing with necessary screws etc., complete.
7Overall width 50 mm
8Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
9300x16 mm
10250x16 mm
11Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
12200x10 mm
13Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass fromn all sides. M.S. stay shall be provided at the bottom to steady the frame.
14Providing and fixing to existing door frames.
1530 mm thick Glass Fibre Reinforced Plastic (FRP) panelleddoor shutter of required colour and approved brand andmanufacture, made with fire - retardant grade nsaturatedpolyester resin, moulded to 3 mm thick FRP laminate forforming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate
16Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)
17Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge.
18Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.
19Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
20Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
21Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
22Size of Tile 600x600 mm
23Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :
24New work (two or more coats) over and including waterthinnable priming coat with cement primer having VOC content less than 50 gram/litre
25Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
26Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour
27Old work (one or more coats)
28Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
29Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
30One or more coats on old work
31Finishing walls with Acrylic Smooth exterior paint of required shade :
32Old work (One or more coat applied @ 0.90 ltr/10 sqm).
33Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
34With cement mortar 1:4 (1 cement : 4 fine sand)
35Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe
3632 mm dia
37Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
38150 mm diameter
39Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
4015 mm nominal bore
41Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
4215 mm nominal bore
43Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
4415mm nominal bore
45Providing and fixing PTMT bib cock of approved quality and colour.
4615mm nominal bore, 86 mm long, weighing not less than 88 gms
47Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
4815 mm nominal bore, 105 mm long, weighing not less than 138 gms
49Multyplying by gst correction factor 0.973 on DSR items
50Add cost index 4.03 %
51Attending of welding complaints for day to day maintenance work deploying one welder with electrical welding machine, one beldar for helping and carriage of welding machine etc. from different floor to floors at different location as per requirement of complaints and including charges of electrodes, other misc. items etc. as per direction of engineering-in-charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58526885
AUTHORITY Government Departments
TENDER VALUE 72.78 Lakhs
LAST DATE 20-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for annual repair & maintenance of To 252 Da Flats At Hari Nagar, New Mahavir Nagar Under Sub-Division Wb-14 New Delhi, During 2026-27. (Sh:-Change Of Tenancy And Internal Finishing Work In Occupied Flats And Other miscellaneous Civil Works).
Basic Detail
Tender No 16/EE/PWD-WD/2026-27
Bidding Type Tender
Location
City Delhi
State Delhi
Key Dates
Publish Date 13 Nov 2026
Submission Date 20 Nov 2026
Open Date 20 Nov 2026
Finance
Tender Value 72.78 Lakhs
Tender Fee Ref. Documents
EMD 1.45 Lakhs
Exemption Not Available
Document List
BOQ_402295.xls
d1197385-e274-4ed9-8d0a-7570cf7cf0cf.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 20, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Today

Tender Documents

Download All (ZIP) ↓
xls

BOQ_402295.xls

html

d1197385-e274-4ed9-8d0a-7570cf7cf0cf.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender