Tender For Sewerage System For Kotkhai Town In Tehsil Kotkhai District Shimla(H.P). (Sh: Laying Jointing And Testing Of Di (Spun) Pipes 1250 Rmtr., Construction of 19 Nos. Circular Manholes Chamber For Main And Trunk Sewer, Construction of 12 Nos. Re
Tender Overview
Project Description
Tender for Sewerage System For Kotkhai Town In Tehsil Kotkhai District Shimla(H.P). (Sh: Laying Jointing And Testing Of Di (Spun) Pipes 1250 Rmtr., Construction of 19 Nos. Circular Manholes Chamber For Main And Trunk Sewer, Construction of 12 Nos. Reinforced Cement Concrete Pillers To Support Sewer Line At Various Rds, (Zone 3Rd.) (Estimated Cost:- 13,54,669/-, Earnest Money Rs:- 27,100 /- Time:- 1 Month.)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation(trenches for laying of pipes and M/holes chamber) upto all depths in all classification of earth work such as pick work, jumper work, blasting soft/hard rock or chieselling sof/hard rock where blastinois archiliod outting of mateled bitumenous roads / nuces Cr pavements i/c saturated soil/ bailing or pumping out water in all lifts including trimming and dressing of sides,levelling of beds to correct grade including shoringstrutting.planking. timbering and dewatering wherever required, stacking the useable and un-usable material/soil separately and after laying, jointing and testing of pipes returning the useable soil to trenches in 15cm (fificen centimeters)layers including consolidating of each deposited layer by ramming and watering and then disposing of all surplus excavated soil,un-usable materials as directed within all leads and lifts including restoration of un-metalled surfaces to its original condition and also including cost of diversion of traffic, night signals, fixing caution boards, providing temporary crossing over trenches for access to houses, fencing etc.complete in all respects within all leads and lifts as per the directions of Engineer-in-Charge of the |
| 2 | Laying and testing in trenches to be levelled to grade, centrifugal cement mortar lined ductile iron(spun) pressure pipes confirming to BIS 8923-2000 class K-7,suitable for tyton(push on joints) inculding short pieces, tail pieces, plugs of required nos,cutting pieces where-ever required ( earth work in trenches and cost of joints to be measured and paid for separately) including carriage in all leads and lifts complete in all respects to the best satisfaction of the Engineer-in-Charge of the |
| 3 | 150mm dia |
| 4 | Providing and jointing tyton (push on Joints) to ductile pipe and fitting including testing of the joints, costof rubber gaskit quality conforming to IS 12820 ( Latest edition / amendments) complete in all respects within all leads and lifts as per directions and satisfacation of the Engineer -In-Engineer-in-Charge of the |
| 5 | 150mm dia |
| 6 | Providing and laying cement concrete 1: 3: 6(1 cement: 3 sand: 6 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth below the manhole chamber and footing of pillars. |
| 7 | Providing and laying cement concrete work 1: 1: 2(1 cement: 1 sand :2 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work i/c carriage of material within all leads & lifts and as per the direction of the Engineer-in-Charge of the |
| 8 | Wall (any thickness but not less than 0.10 mtrs thickness), of manhole chambers, Cols etc in foundation & plinth up to floor two level. |
| 9 | Providing and laying cement concrete 1: 2: 4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work and reinforcement for RCC work i/c carriage of material in all leads and lifts and as per direction of the Engineer - in - Charge. |
| 10 | In foundation and plinth |
| 11 | Wall (any thickness but not less than 0.10 mtrs thickness), of manhole chambers, Cols etc in foundation & plinth up to floor two level. |
| 12 | Suspended floor roofs, landing and shelves and their support balconies, beam girderes bressumers and cantiliver upto floor two level in slab of flushing tanks |
| 13 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish i/e centering, shuttering and propping etc with wooden battens & ballies height of propping and centring below supporting first carrying not exceeding 4 mrs and removel of the same for insitu-reingorced concrete & plain concrete work such as: |
| 14 | In flat surfaces such as soffits,suspended floors, roofs landing and the like 'Floors etc. upto 200 mm thickness in M.H chamber, flushing tanks etc. |
| 15 | Wall (any thickness but not less than 0.10 mtrs thickness attached pilasters butteress, |
| 16 | Edges of slab in man holes. |
| 17 | Providing and fixing precast RCC (SFRC) Manhole frame and cover conforming to IS-12592 part I & Il on the tope ring beam of M.H. chamber during concreting of chamber having following duties of cover & frame. (Heavy duty) |
| 18 | Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete in all respect in foundation up to floor two levels. |
| 19 | Providing and fixing 200mm wide C.I. rungs with chequered or ribbed non slip surface including fixing in cement concrete complete in all respect in M.H chamber, pillars etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender