Water Resources and Irrigation Government Departments Closing in 3 days TDR #58526551

Tender For repair renovation Of Gwss Harizen Basti Naliya In G.P Kuddu In Tehsil Jubbal Distt. Shimla (H.P). (Sh: Repair Of Storage Tank, Cleaning Of Filter Bed & Replacing Filter Meadia, Construction of Nallah Intake & Construction of Edge Wall To P

Issued by Government Departments · Shimla, Himachal Pradesh
Tender Value
5.81 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
3 days left
EMD
11650
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for repair renovation Of Gwss Harizen Basti Naliya In G.P Kuddu In Tehsil Jubbal Distt. Shimla (H.P). (Sh: Repair Of Storage Tank, Cleaning Of Filter Bed & Replacing Filter Meadia, Construction of Nallah Intake & Construction of Edge Wall To Protection Of Nallah Intake) (Estimated Cost:- 5,81,644 /-, Earnest Money Rs:- 11,650 /- Time:- 6 Months.)

BOQ

Name of Work:- R/R of GWSS Harizen Basti Naliya in G.P Kuddu in Tehsil Jubbal Distt. Shimla (H.P). (SH: Repair of Storage Tank, Cleaning of filter Bed & Replacing filter meadia, C/O Nallah intake & C/O edge wall to protection of Nallah intake) (Estimated Cost:- 5,81,644 /-, Earnest Money Rs:- 11,650 /- Time:- 6 Months.)
Sl. No. Item Description
1Chipping of RCC/Stone masonary walls/ plastering surfaces deep average 10mm width in base with in all leads aand lifts as per the direction of the Engineer in Charge.
2Providing and laying cement concrete 1:2:4 (1cement :2Sand: 4 graded stone aggregate 20 mm N/S) and curing complete excluding cost of form work and reinforcement for Rainforced concrete work in:-
3Foundation and Plinth with in all leads and lifts as per the direction of the Engineer in Charge.
415 mm thick cement plaster in single coat on fair sides of brick/concrete/ stone walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth and finished even smooth in cm 1:3 (1cement: 3sand) within all leads and lifts and as directed by the Engineer-in-charge.
5Lifting of filter media from existing filter tank and stacking the same with in all leads and lifts and entire satisfection of Engineer-in-Charge.
6Fine Sand 0.2mm to 0.4mm
7Course 3mm to 6mm
8Bajri 6mm to 20mm
9Bajri 20mm to 25mm
10Bottom layer broken stone 50mm to 75mm
11Providing and placing horizontal layers filtering media duly graded screened washed and cleaned as specified by the Engineer Incharge with in all leads and lifts.
12Bajri 6mm to 20mm
13Bajri 3mm to 6mm
14Replacing old media filtering media duly graded screened washed and cleaned as specified by the Engineer Incharge with in all leads and lifts.
15Bottom layer broken stone 50mm to 75mm
16Bajri 20mm to 25mm
17Bajri 6mm to 20mm
18Course 3mm to 6mm
19Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge.
20Providing and laying cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 40mm (Forty millimeter nominal size) and curing complete excluding cost of from work in foundation and plinth with in all leads & lifts as per entire satisfication of Engineer-in-Charge.
21Providing and laying cement concrete 1:1.5:3 (1cement :1.5Sand: 3 graded stone aggregate 20 mm N/S) and curing complete excluding cost of form work and reinforcement for Rainforced concrete work in:-
22In vertical Walls (Any thickness) attached pillasters, pillasters, buttresses, beam girder and contilevers upto floor two level with in all leads and lifts as per the direction of the Engineer in Charge.
23Providing and laying (porus) No fine cincrete 1:4 (1 cement: 4 graded stone agg. 40mm) and above and curing complete with weep holes or porus etc. with in all leads & lifts as per the entire satisfaction & direction of the Engineer Incharge.
24Providing from work steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centering, shuttering, strutting and propping etc. with wooded battens & ballies, height of propping and centring below supporting floor to ceilling not exceeding 4 meters and removal of the same for in situ reinforced concrete and plain concrete work with in all leads aand lifts as per the direction of the Engineer in Charge.
25Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttress, plinth and string couress and the like with in all leads aand lifts as per the direction of the Engineer in Charge.
26Flat surfaces such as soffits and suspended floors, roofs landing and the like: Floors etc up to 200 mm in thickness with in all leads aand lifts as per the direction of the Engineer in Charge.
27Providing and laying cement concrete 1:2:4 (1cement :2 Sand: 4 graded stone aggregate 20 mm (Twenty millimeter nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever up to floor two level with in all leads and lifts as per the direction of the Engineer - in - Charge.
28Providing mild steel/ tor steel reinfircement for rainforced concrete work I/C bending, binding and placing in position complete upto floor two level with in all leads and lifts as per the direction of the Engineer in Charge.
29Providing and placing horizontal layers filtering media duly graded screened washed and cleaned as specified by the Engineer Incharge with in all leads and lifts.
30Broken Stone 50mm to 75mm
31Bajri 20mm to 25mm
32Bajri 6mm to 20mm
33Providing and Fixing (M.S. Sheet & Angle Iron) 600x600 mm size man hole cover with frame and controling chaber for wheel valve complete in all respects including locking arrangements etc. (not less than 23 Kg) within all leads and lifts and as directed by the Engineer-in-charge.
34Providing & Laying cement concrete 1:6:12(1ccement :6 sand: 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth with in all leads and lifts as per the directions of the Engineer in charge.
35Providing andf laying cement concrete 1:5:10 (1 cement :5 sand : 10 graded stone aggregate 40 mm nominal size ) with 15% plum concrete and curing complete excluding cost of form work in retaining walls/breast walls,the size of plums shall usually be 150 mm to 300 mm as per H.P.P.W.D Specification.
36Boulder filling behind R/wall & B/wall within all leads and lifts and as directed by the Engineer-in-charge.
37Providing and fixing of Finolex pipe 50mm dia. In R/Wall including all re-fitting i/e elbowa, sockets etc. with in all leads aand lifts as per the direction of the Engineer in Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58526551
AUTHORITY Government Departments
TENDER VALUE 5.81 Lakhs
LAST DATE 21-11-2026
Authority
Authority Name Irrigation And Public Health Department
Work Description Tender for repair renovation Of Gwss Harizen Basti Naliya In G.P Kuddu In Tehsil Jubbal Distt. Shimla (H.P). (Sh: Repair Of Storage Tank, Cleaning Of Filter Bed & Replacing Filter Meadia, Construction of Nallah Intake & Construction of Edge Wall To Protection Of Nallah Intake) (Estimated Cost:- 5,81,644 /-, Earnest Money Rs:- 11,650 /- Time:- 6 Months.)
Basic Detail
Tender No JBL-SML-09-718
Bidding Type Tender
Location
City Shimla
State Himachal Pradesh
Key Dates
Publish Date 13 Nov 2026
Submission Date 21 Nov 2026
Open Date 21 Nov 2026
Finance
Tender Value 5.81 Lakhs
Tender Fee 350
EMD 11650
Exemption Not Available
Document List
a25a9885-7d5b-4c00-9ef5-a7ef9ca25044.html
BOQ_221026.xls
f6.pdf
f8.pdf
tc.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 21, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

a25a9885-7d5b-4c00-9ef5-a7ef9ca25044.html

xls

BOQ_221026.xls

pdf

f6.pdf

pdf

f8.pdf

pdf

tc.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender