Tender For Restoration Of Rain Damages On Bsl J&K Boundary Road Km 13/130 To 93/400 (Under Pdna-2025) (Sh:- Construction of Plain Cement Concrete retaining wall And B/Walls, Crate Work In Km 49/0 To 57/00 And providing and laying metallic and tarring
Tender Value
1.37 Crore
Estimated cost
Bid Submission
21 Nov 2026
6 days left
EMD
2.75 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages On Bsl J&K Boundary Road Km 13/130 To 93/400 (Under Pdna-2025) (Sh:- Construction of Plain Cement Concrete retaining wall And B/Walls, Crate Work In Km 49/0 To 57/00 And providing and laying metallic and tarring At Various Rds)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1The rate includes octroi,royality,Malkana,Toll tax, GST or any other taxes imposed by the Government. |
| 2 | Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil, comprising of ordinary soil, ordinary rock , hard rock chiseling / wedging out rocks (where blasting is prohibited) as per drawings and MORD technical specification clause 305.1 and as per the directions of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable / approved materials to the original surface in layers not exceeding 150mm one hundred fifty millimeters) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate includes octroi,royality,Malkana,Toll tax, GST or any other taxes imposed by the Government. |
| 3 | Providingand laying Mechanically mixed and vibrated concrete for plain/reinforced concrete nominal mix 1:4:8 ( one cement is to four sand is to eight graded crushed stone aggregate 40 millimeter (forty millimeter) nominal size in or under water and curing complete for 14 (fourteen) days, in open foundations for all type of structures and the like drain etcetera including pumping or bailing out water (surface and sub soil water) dewatering for alldepths and any quantum of water including removal of slush which may arise at the time of laying under water complete for all heights / depths including the cost of form work complete as per drawings and M.O.R.D. technical specification Clauses 802,803,1202 and 1203 or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate includes octroi,royality,Malkana,Toll tax, GST or any other taxes imposed by the Government. |
| 4 | Backfilling behind retaining wall/breast wall complete as per drawing and technical specification clause 1204.3.8 in granular material within all leads and lift of material as per direction of Engineer-in-Charge and other incidentals. The rate is including royality, Malkana,Toll tax, GST or other taxes imposed by the Government. |
| 5 | Providing weep holes in brick masonry/stone masonry/plain or reinforced concrete abutment, wing wall, return wall with 100mm (one hundred millimeter) dia P.V.C. pipe (Finolex/ Vertex) with slope of I (v): 20(H) towards drainage face complete as per drawing and MORD technical specification section 700 and 1200 including hauling /carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete in all respect and as per the direction of Engineer-In-Charge. The rate is including royality, Malkana,Toll tax, GST or other taxes imposed by the Government. |
| 6 | Providing and laying boulder apron laid in wire crate with 4mm dia G.I. wire confirming to IS 280 and IS 4826 in 100 mm x100mm(hundred milimeters in to hundred milimeters) mesh (woven diagonally) including 10% of laps & joints laid with stone boulders weighing not less than 40kg (Forty kilogram) each in toe walls as per drawing and MORD technical specifications clause 2503 and as per the direction of Engineer-In-Charge including carriage of materials within all leads and lifts and other incidental..The rate includes octroi,royality,Malkana,Toll tax, GST or any other taxes imposed by the Government. |
| 7 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.The rate is including royality, Malkana,Toll tax, GST or other taxes imposed by the Government. |
| 8 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502. The rate is including royality, Malkana,Toll tax, GST or other taxes imposed by the Government. |
| 9 | Providing and applying tack coat with Bitumen emulsion (RS-I) using emulsion pressure distributor at the rate of 0.275 kg. (zero point two seven five kilogram per Square metre on the prepared granular surface treated with primer and cleaned with hydraulic broom as per M.O.R.D. technical specifications clause 503 and as per the directions of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government. |
| 10 | Providing, laying and rolling of close-graded Mix Seal Surfacing material of 25 mm thickness composed of 13.2 mm to 0.9 mm (Type-A) @0.338kg/per ten square meter aggregates using penetration grade bitumen @ i.e. binders content @ 27.5 kg/10sqm or 5.11% by weight and minimum density of MSS should be 2.10 gram/cc to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 KN static roller and finishing to required level and grades as per Technical Specification Clause 509 including all leads, Lifts and carriage of materials complete as per entire satisfication of the Engineer in Charge.The rate is including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender