Defence Statutory Bodies & Commissions/Committees Closing in 15 days TDR #58526508

Tender For Provision Of Deficient Borewell At Afs Under Ge(Af) Tech Area Agra

Issued by Statutory Bodies & Commissions/Committees · Agra, Uttar Pradesh
Tender Value
45.50 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
15 days left
EMD
91000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provision Of Deficient Borewell At Afs Under Ge(Af) Tech Area Agra

BOQ

Name of Work:- PROVISION OF DEFICIENT BOREWELL AT AFS UNDER GE(AF) TECH AREA AGRA
Sl. No. Item Description
1Drilling of trial bore hole vertically down of size 200-300 mm dia and other machinery for rotary or DTH process or combination of both in / through any strata such as loam sand, red clay, mooram, weathers rock, rock hand lightly fractured rock, top soil, sandy clay, pebbed soil, lamy soil or any other geological formation complete all as specified and directed.Note :- (i) Slotted pipes and pea gravel will be measured and paid separately.(ii) Collection of soil samples and strata shall be measured and paid separately (iii) Casing pipe shall be arranged by the contractor and the same shall remain the property of the contractor after extraction.
2M & L drilling /reaming vertically bore 550 dia in any type of strata for 250 mm ERW casing pipe for various depth as shown below including all works pertaining to bore complete all as specified and directed Note:- (i) During boring if rocky strata is meet with than boring shall be upto 150mm dia and for the depth as require No price adjustment shall be made for reduction of bore dia due to rocky strata.(ii) In case hard strata is meet with during process of drilling bore casing shall not be provided rocky strata and no claim shall be admissible on account of less of quantity of casing pipe brought by the contractor.
3Supply and assembling including jointing lowering and fixing in position ERW MS casing pipe 250mm dia and 8mm thick upto require depth below ground level according to strata chart in different lengths conforming to IS -3589/4270 2001 having screwed and socketed joints and including welding with coupler ring of MS Strip 40X 3 MM (04 Nos) on each joint extended 75 mm on each joint extended 75mm on each side to socket and including painting with two coats of black anticorrosive bituminous paint welding shall be done throughout the circumference of the pipe and coupler rings both sides complete all as specified and directed
4Supply and assembling including jointing lowering and fixing ERW MS Strainer ( Slotted) V weird pipe 250mm dia and 8mm thick conforming to IS -3589/4270 2001 to different length as required the size of slots shall be as designed by the contractor based on aquifers regularly arranged its equal distance all around the slotted pipe so as to make the perforated area 15% to 20% of slotted pipe jointing complete all as specified and directed by engr-in-charge.
5Description all as per item No 4 here-in-before but plain size 200mm dia
6Description all as per item No 4 here-in-before but (Slotted) size 200mm dia
7M & L Filling gravel pack provided in fine aquifers of size may be less than 2 mm and 6 mm to 20mm thickness around borewell casing pipe upto ground level as directed.
8M & L Carrying out Development of bore well by air compressor of capacity 200 PSI 900 CFM IS 8110 as required on ground, till to get the clear water complete including carrying out yeild test complete all as specified and directed.
9Testing of tubewell with heavy duty pump of appropriate capacity but not less than 70 Cumper hour (20000GPH) upto 24 hours or more, so as to obtained the water sand /silt free upto 20 PPM and as approved (Test record for the same duly signed by contractor and Engineer-in Charge shall be kept on record) complete all as specified and directed.
10M & L Carrying out Yield test (V notch type) of bore well by continuously pumping for 08 hours to determine safe pumping yield and submitting the test report in the presence of departmental representative all as directed.Note :- T&P required for yield testing shall be arranged by the contractor without any extra cost to department.
11Supply and fixing of MS reducer (socket and welded as specified 250 X200 mm of 8 mm wall thickness completed including welding MS Strip (40 X6 mm - 02 Nos) or each joint extended 75 mm of each side complete all as per specified and directed.
12Supply and fixing screwed mild steel bail plug of 200 mm of 8 mm wall thickness with 1 Meter long MS rod 25 mm dia welded to it at 300 mm from bottom bail back completed all as specified and directed
13Fabricate supply and fix top cover /well caps suitable for 250 mm dia of pipe, made out of 3.15mm thick MS sheet for bore well in two half sections with fixing arrangement, nuts & bolts with an accessibility of pump delivery pipe, including one coat of epoxy primer and two coats of epoxy paint complete all as specified and directed.
14M&L Flat iron clamps guard supporting pipe of size 250mm dia including GI bolts, nuts and washers complete all as specified.
15Supply and fixing 02 No flat iron (6\\" X 5/8\\") size clamp for holding to 250 mm dia housing pipe including casting of PCC block (1:2:4) type B1 of size 1.2 M X 1.0M X 0.6M including 100 mm dia MS pipe 02 No 1.0 M with long cap plug and cap top for feeding pea gravel complete all as specified and directed
16Testing of water samples of bore wells for potability by chemical analysis as well as bacteriological potability from Govt Laboratory and submission of the report complete all as specified and directed by Engineer-in Charge. Note: Water sample shall be collected in 3 bottles and sealed for lab testing duly signed by Contractor and engineer in charge.
17Electronic logging by means of electric logger for the total depth of tubewells submission of 4 copies of logging sheet alongwith one original copy and its interpreation complete all as specified and directed by Engineer- in -Charge . Note : The borehole shall be electrically- logged for precise delineation of aquifer and the water bearing zones avilable which are to be tapped.
18Fabrication and supply of strata sample box, made out of 20mm thick veneered particle board and partition with 12 mm thick plywood with 25x25x2mm thick plywood with 1200x750mm with 10 partitions of size 150 mm x 150 x 100mm deep with front glass sheet sliding type cover with aluminium frame all round 2 Nos dey hole plate of size 40x25x3mm complete all as specified ( Name of tubewell, location, strata sample with depth shall be written on box as directed by Engineer-in-Charge.) Note : Strata Chart and casing assembly chart on good quality glazed paper of size 80x30 Cm duly framed shall be provided by the contractor alongwith strata sample box without any extra cost to Govt.
19Supply, lowering, testing and commissioning of submersible pump set vertical type, multistage with gun metal impellers duly coupled to submersible electric driven motor, 3 phase, 415V, with 6.5 LPS, 74 mtrs head, apprx 10 HP/7.5 KW including provision of NRV both ends screwed of size 80 mm dia fixed to GI / UPVC pipe 80 mm dia complete all as specified and directed.
20Supply and lowering, connecting and testing PVC insulated PVC sheathed submersible cable 10 Sqmm three core copper conductor flat 1100V grade conforming to IS complete all as directed.
21Supply and Fixing 16 mm dia Steel wire for anchoring submersible pump complete all as specifired and directed.
22M&L for lowering into borewell 100 mm dia GI medium grade column pipe with flanged ends, including supply and fixing jointing materials such as rubber gasket 4mm thick, nuts, bolts and washers etc complete. (for 65 RM x03 Nos borewell)
23Material and labour for valve chamber of size internal dimensions (1.2 X 1.2 X 0.45) mtr by using 100mm thick 1:4:8 in foundation, type D-2 (using 40mm graded crushed stone aggregate) as in mass concrete, brick work with sub class 'B' bricks in CM (1:3) of thickness 23 cms, coping with PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate), rendering 15mm thick on brick masonry valve surface in cement mortar (1:4) flooring with 40mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate), laid over 75mm thick hard core including supply and fixing of mild steel sheet cover made out of 3 mm thick plain black sheet with 3 No's 150 mm long mild steel butt hinges, welded to angle iron frame and shutter including handle and locking arrangement, angle iron frame made out of 40 X 40 x6 mm thick ( Fe-410-0) complete including painting to mild steel work with two coat of synthetic enamel paint over one coat of red oxide primer all as specified
24S&F CI sluice valve both end flanged of size 100mm bore including rubber gasket class PN-1.6, IS-14846 2000 ISI marked with stainless steel spindle and iron wheel head complete with rubber gaskets, nuts, bolts washers and packing materials etc complete all as specified and directed.
25S&F in CI non return valve of size 100 mm bore including rubber gaskit , class PN-1.6, both end flanged, ISI marked including bolts, nuts, washers and rubber gasket etc complete all as specified and directed.
26Supply and Laying XLPE UG cable PVC insulated, multistranded, bedded armoured heavy duty electric cable 1100 volts grade with aluminium conductor of size 70 Sqmm 3.5 core in trenches or fixed on wall/floor complete all as spd and directed.
27Supply, Laying, jointing & testing Ductile iron pipe with spigot and socket ends K-9, 100 mm bore including titan joint, ISI marked suitable for in any length laid in trenches complete all as specified and directed.
28S & F ductile iron pipe fittings such as bends, tapers, tee pieces single branch, \\"Y\\" junction, collars, caps and plugs, M J collar etc spigot socketed or flanged ends type of size upto 200 mm nominal bore pressure rating PN-1 (all the fittings shall be coated for rust prevention i.e. external coating zinc rich paint with finishing layer of bituminous as per Annexure - A of IS:9523/2000 and internal lining shall be of cement mortar with seal coat as per Annexure 'B' of IS-9523/2000) complete all as specified and directed. Note: (i) Joint and jointing material shall be measured and paid separately (ii) Excavation and earth work shall be measured and paid for separately
29Cutting to existing CI/DI pipe line of size up 100 mm dia required for repair/replacement of pipe line and insertion of collars/tail pieces, tee etc including dewatering of pit if any complete all as specified and directed. Note : Excavation and earth work if any shall be measured and paid for separately.
30Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation etc or for laying pipe lines and cables and getting out as in soft/loose soil complete all as specified and directed.
31Returning filling in including spreading leveling, watering and well ramming in layer not exceeding 25 cm in soft/loose soil, complete all as specified and directed.
32Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
33Supply and laying double walled corrugated (DWC) HDPE duct pipe conforming to IS 16205 Pt -24 , inner plan, 450 N of approved color complete with fittings for cable protection of size 63 mm inner dia and 75 mm outer dia complete all as specified and directed.
34Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than2.25 Metre, deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanized earth strip 25 X 4 mm by means of bolts, nuts washers check nuts of galvanized or steel all as shown in electrical plate No 5 of SSR Part I connected to earthing test points all as specified or indicated including excavation and earth work, PCC 1:2:4 type 1 in chamber, RCC cover 40mm thick in 1:2:4, type B1 (20mm graded aggregate) with 8mm MS rod at 15cm in both ways hook, funnels with watering pipe, wire mesh and copper lugs, GI protection pipe and testing on completion .
35Material & Labour PCC (1:3:6) Type C2 (using 40mm graded stone aggregate) as in plinth etc. complete all as specified and directed.
36Supply and fixing of outdoor type Pump Control Panel of suitable size, MS Channel Base Frame mounted suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bars of rating 200 Amps, including Provision of Spreader link to incoming / outgoing side of MCCBs for termination of cables / busbars and FRP / DMC Cable connectors for termination of outgoing cables from pump starters / MCBs. The Panel shall be duly fabricated in a approved / certified factory / fabrication house followed by powder coated painting with approved shade of RAL-7032 (SIEMENS GRAY). The Feeder Pillar shall be completely dust & vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The panel board shall be made out of 3mm thick CRCA mild steel sheet and having compartmentalized construction for individual switch gears / Pump Starters and Bus Bars and having front and rear opening facility and detatchable type mild steel channel (MC-75) base frame at bottom, suitable for mounting on the brick pedestal through grouting bolt, panel board shall be provided with ventilation facility in the form of louvers for better heat dissipation. All the cables entry / exit from the bottom of cable alley only. The panel shall be comprising of the followings:- a) Incomer MCCB 4 Pole, 125 Amps, 25 KA with rotary handle (adjustable thermal 100% - 80% - 01 No. (as Incomer) of Make : LEGRAND / L&T / SCHNEIDER)
37b) Outgoing MCCB 63 Amps, 3 pole, 16 KA - 02 Nos. (for Pump Starter) of Make : LEGRAND / L&T / SCHNEIDER)c) Fully Automatic Star-Delta Motor Starter (01 Nos) with suitable rating Contactors, Timers, Single Phasing Preventor with dry run protection, over load relay suitable for a 15 HP motor (Illuminated Push button Actuator shall have to be mounted on the starter cubicle door) - 01 Nos of Make L&T / BCH / SIEMENS)d) MCB SPN 16 Amps, 10 KA, 'C' Curve - 02 Nos (one for Chlorinator & one as Spare) f) Digital Voltmeter (96mmx96mm) 3.5 digit with accuracy class 1 - 01 No of make AE / RISHABH / L&T / CONZERV)g) Volt Meter selector switch 5 Amps (3 position + OFF) - 01 (KAYCEE / L&T / SG)h) Digital Ammeter (96mmx96mm) 3.5 digit with accuracy class 1 - 02 Nos (WITH CT 50/5) (Main-01 No + Pump-01 Nos) of Make AE / RISHABH / L&T / CONZERV)i) Ammeter selector switch 5 Amps (3 position + OFF) - 02 Nos (KAYCEE / L&T / SG)j) LED Indicator lamp, 22mm (Red-Yellow-Blue) - 01 Set (L&T / RAAS / SIEMENS)
38Supply and lowering submersible pump set of capacity 1.5 HP, single phase,50 Hz, 70 LPM at 57 Mtr Head, delivery size 32mm,stage 13 complete all as specified and directed.
39S&F wall mounted cubical type panel board with locking arrangement and comprising of starter, capacitor, volt meter, indicator lamp, Amp meter & MCB/cut out of capacity suitable for upto 2.0 HP single phase submersible pumping set including fixing arrangement complete all as specified and directed.
40M & L for 2 Nos MS clamp madeout of 40mmx 6 mm thick FI for holding of 40 mm dia column pipe complete with suitable size 02 Nos nut, bolt & washers complete all as specified and directed
41M& L for well cap for 125 mm dia duly made out of 4 mm thick MS plate including making provision for passing GI column pipe of 40 mm dia complete all as specified and directed by Engineer-in-charge.
42Supply & lowering in bore well 32mm bore high density polyethlene (CPVC) column pipe socketed type of pressure rating 6Kg/cm2 with & including all necessary fixing/ jointing accessories complete all as specified and directed. Make- Ashirvad/Kishan/Atul
43M&L for boring/drilling in any type of strata upto 100 mtr of 125 mm dia by any means including developing bore, flushing up to coming of clean water etc all as specified and directed.
44Supply & lowering PVC pipe 110 mm dia ISI mark 6 Kg/cm² pressure Plain/slotted all as specified and directed.
45M&L for pea gravel of suitable size for borewell to be filled around casing pipe of borewell complete all as specified and directed
46Supply and laying or fixing or passing in well/ borewell 1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor submesible cable of size 2.5sqmm 3 core flat including connection to submersible motor/ starter panel with & including necessary jointing materials if required and testing on completion complete all as specified and direced.
47Supply, laying, testing 40 mm bore GI tubing, medium grade, galvanised with all fittings & fixed complete to wall, ceiling or laid in floor including required GI fitting complete all as specified and directed .
48S&F 40 mm bore gun metal globe gate valve with iron wheel head, screwed both ends ISI mark complete all as specified & directed.
49M&L PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in surface chanells and drains complete all as spciified and directed Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58526508
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 45.50 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provision Of Deficient Borewell At Afs Under Ge(Af) Tech Area Agra
Basic Detail
Tender No 8200-1871/E8
Bidding Type Tender
Location
City Agra
State Uttar Pradesh
Key Dates
Publish Date 14 Nov 2026
Submission Date 07 Dec 2026
Open Date 14 Dec 2026
Finance
Tender Value 45.50 Lakhs
Tender Fee 500
EMD 91000
Exemption Available
Document List
1871Tender.pdf
BOQ_895975.xls
e62d265e-dfa9-4157-b531-44621a9fd5f8.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 15 days
Dec 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
pdf

1871Tender.pdf

xls

BOQ_895975.xls

html

e62d265e-dfa9-4157-b531-44621a9fd5f8.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender