Tender For Repairs To Flooring,Plastering, Joinery, Ceiling And Wall Panneling Including Sanitary Fittings At Alisda And Outer Pockets (Otm And Md Accn Under Ge (I) R And D (West) , Bangalore.
Tender Value
39.70 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
19 days left
EMD
79400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Flooring,Plastering, Joinery, Ceiling And Wall Panneling Including Sanitary Fittings At Alisda And Outer Pockets (Otm And Md Accn Under Ge (I) R And D (West) , Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE OF WORKS |
| 2 | Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness ( below or above ground level ) and disposing of debries outside MD land complete all as specified and directed. |
| 3 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | Demolition of concrete block walling, RR masonary in cement mortar including all quoins archas pillars etc and pre-cast block walling etc complete all as specifed and directed. |
| 5 | Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar and removal of debris outside MD land etc complete all as specified and directed. |
| 6 | Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris to a distance exc 1 Km out side MD land all as specified and directed. |
| 7 | Taking down chowkat or frames with shutters (with out taking off syhutters from the frame) n. exc 1.50 sqm each and removing from site all as specified and directed. |
| 8 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each all as specified and directed. |
| 9 | Dismantling of aluminium partition / windows/doors of any size and any description etc complete all as specified and directed. |
| 10 | Dismantling of ceiling board /Wall panelling of any thickness and of any description including cover fillets complete all as specifed and directed. |
| 11 | M&L for providing 75 mm thick cement concrete in 1:3:6 type C-1,(using 20 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed. |
| 12 | M&L for 25mm thick PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate finsihed rough as in leveling course to receive top flooring setc compete all as specified and directed. |
| 13 | S&F for light shade Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM(1:6) complete all as specified and directed. |
| 14 | S&F for light shade coloured Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 sqm in vertical surfaces/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in CM(1:4) complete all as specified and directed. |
| 15 | S&F for coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM(1:6) complete all as specified and directed. |
| 16 | S&F for coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in CM(1:4) complete all as specified and directed. |
| 17 | S&F for coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM(1:6) complete all as specified and directed. |
| 18 | S&F for glazed ceramic coloured tiles of size exc 0.15 sqm to 1 sqm in vertical surface as in dado set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with color of tiles over and including 10 mm thick rendering in cement motor 1:4 all as specified and directed. |
| 19 | M&L for Granite of 20mm thick, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including screed layer of 15 mm thick in CM 1:4 all as specified and directed. |
| 20 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and mirror polishing including 15mm screed bed or bedding layer in 1:4 CM complete all as specified as directed |
| 21 | All as per Item 19 above but on vertical surfaces over 15mm screed bed or bedding layer in 1:3 CM complete all as specified and as directed by Engineer-in-Charge. |
| 22 | M&L for Precast cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 23 | M&L for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 24 | M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth complete all as specified and directed. |
| 25 | M&L for 1mm thick wall care putty on wall surfaces complete all as specified and directed. |
| 26 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 27 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer etc complete all as specified and directed. |
| 28 | S&F for 40 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, two faces covered with decorative face veneer with lipping / frame to match complete all as specified and directed. |
| 29 | S&F for 35mm thick second class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed. |
| 30 | M&L for 30mm thick 2nd class hard wood glazed and skeleton shutter, open rebated and prepared to receive glass gauge, etc (with sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc size of members of shutter as specified in SSR part I section 8 clause 20 (b) of windows, ventilator etc complete all as specifed and directed. |
| 31 | S&F for Solid PVC door frame of size 50X47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suupplying & fixing in opening complete all as specified and directed . |
| 32 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20mm width stuckinside solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bootom rail; paneling of plain clour PVC sheet to be fitted in the M.S frame welded/ sealed to the stieles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification.complete all as specified and directed. |
| 33 | S&F for stainless steel hinges of medium weight of size 100 mm complete all as specified and directed. |
| 34 | S&F for cold rolled mild steel hinges of medium weight of size 100 mm complete all as specified and directed. |
| 35 | S&F for Aluminium anodised barrel tower bolts of extruded section, 150 mm long all as specified and directed. |
| 36 | S&F for Aluminium anodised cast type handles 150mm long all as specified and directed. |
| 37 | S&F in repair for aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and directed. |
| 38 | S&F in repair floor door stopper of rubber and aluminium alloy body, 100 mm size all as specified and directed. |
| 39 | S&F for powder coated aluminium frame and shutters for doors, windows ventilators and in partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 40 | S&F Powder Coating aluminium door shutters with aluminium section weighing not less than 0.55 kg/ metre including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specifie |
| 41 | S&F for Powder Coating aluminium window and ventilator shutters, fixed type without sash bar with aluminium section of size 40 x 18 x 1.29 mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. |
| 42 | M&L for 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work in cup board shutters / aluminium partions etc..complete all as specified and directed. |
| 43 | S&F for 4.8 mm thick sheet glass ordinary quality and glazing fixed in aluminium frames etc complete all as specified and directed. |
| 44 | S&F in repair for door closer hydraulically regulated aluminum (dia cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg, fixed as in repairs, complete all as specified and directed. |
| 45 | S&F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty etc complete all as specified and directed. |
| 46 | Material and labour for false ceiling at any height using integral densified calcium silicate, reinforced with fibre and natural filler false ceiling tiles of size 595 mm x 595 mm of approved texture, design and patterns having NRC (Noise reduction co-efficient) of minimum 0.5 as per IS 8225 : 1987, Light reflectance of minmum 85%, non-combustible as per BS : 476 (Part - 4), fire performane as per BS : 476 (Part 6 & 7), humidity resistance of 100%, thermal conductivity < 0.05 W/m K as per ASTM 518 : 1991, fixed in true horizontal level, suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanised @ 120 grams per square metre on both sides), comprising of main - T runner of size 24 mm x 38 mm of length 3 m, cross - T of size 24 mm x 32 mm of length 600 mm to form grid module of size 600 mm x 600 mm, Grid suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per square metre) i.e., 50 mm long, 8 mm outer diamter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85 mm x 25 mm x 25 mm x 2 mm. Galvanized iron perimiter wall angle of size 24 mm x 24 mm x 0.4 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre, 40 mm long dry wall stainless steel screws complete all as directed by Engineer-in-Charge .Note : Ceiling Tile shall be of 15 mm thick densified tegular edged light weight calcium silicate of Make Aerolite or techno commercial equivalent. |
| 47 | S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers of 6mm dia GI (upto 1200 mm length) adjustign level fixed to roof slabs by means of ceiling cleates made out of GI flat 40 x 3 mm size 60mm long complete all as specified and directed. |
| 48 | Providing & fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions and seamless finish on joints etc complete all as specified and directed. |
| 49 | M&L for preparation new ceiling surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 50 | M&L for second class hard wood, clean sawn, in scantling timber frame and fixed with nails complete all as specifed and directed. |
| 51 | S&F for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc complete all as specified and directed |
| 52 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap 40mm etc complete all as specified and directed. |
| 53 | S&F 100mm Brass handles, cast type, polished bright etc complete all as specified and directed. |
| 54 | S&F for magnetic Ball catches spring with 8mm dia steel ball, and brass body and striking plate including letting in and fixed etc complete all as specified and directed. |
| 55 | S&F for Venetian blinds, vertical type/rolling on the top type,100 mm wide with polyester fabric of approved colour and pattern with aluminum fittings, and top rail and nylon buttons / loops etc., fixed cuttings and alteration if necessary wherever AC / coolers exists including dismantling of old unserviceable venetian blinds, complete all as specified and directed. Make: Vista or equivalent |
| 56 | M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 57 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 58 | M&L for preparation of old painted wooden surfaces of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 59 | M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface over a coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 60 | S&F for stainless steel wire mesh of 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple complete all as specifed and directed. |
| 61 | S&F in repair for stainless steel wire mesh of 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple complete all as specifed and directed. |
| 62 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or driling out old glazing pins/spring clips and providing and fixing new ones complete all as specifed and directed. |
| 63 | S&F for 4 mm thick sheet glass ordinary qauality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 64 | Supply and fixing of 10 mm to 12mm thick WPC wall panels of approved make, colour and texture, fixed over with solid WPC framework 25mm thick and 50mm wide with necessary screws, fasteners, trims and accessories, with design as per manufacturer instructions. |
| 65 | Providing and fixing 10 mm to 12 mm thick WPC false ceiling panels of approved make, colour and finish, including Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers of 6mm dia GI (upto 1200 mm length) adjustign level fixed to roof slabs by means of ceiling cleates made out of GI flat 40 x 3 mm size 60mm long complete all as specified and directed.and making provisions for light fixtures, AC diffusers and other services, complete in all respects as per approved drawings with manufacturer instructions and specifications. |
| 66 | Providing and fixing 30 mm thick WPC door shutter of approved make, colour and finish, including WPC door frame of size 45 x 70 mm , hinges, mortise lock, handles, tower bolts, door stopper, screws, fasteners and all necessary hardware/accessories, including cutting, fixing, alignment and installation, complete in all respects as per approved drawings and specifications. |
| 67 | Providing and fixing approved quality decorative wallpaper 200–250 GSM,of selected design, colour, pattern and texture on prepared wall surface, including surface preparation, primer/sealer, adhesive, cutting, matching of patterns, jointing, wastage, finishing and all necessary materials and labour, complete in all respects as per approved sample and specifications. |
| 68 | S&F of a premium frosted glass urinal partition, size 450 mm x 900 mm, fabricated from 12 mm thick heavy-duty heat-strengthened glass. The panel shall feature a uniform acid-etched frost finish on both sides, with all edges precisely machine-cut, polished, and finished. The partition is to be securely wall-mounted using heavy-duty Grade SS 304 stainless steel \\"L\\" brackets, complete with structural wall inserts, anchors, and necessary fasteners. All work to be executed to a flawless finish, completely as specified and directed by the Engineer-in-Charge. |
| 69 | S&F in repairs vitreous China Urinal, Half stall size 267x333x693 , white (excluding flushing cistern, flush pipe) , white,with bottle trap complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back with grating and union for discharge pipe and waste pipe including taking down old urinal complete all as specified and as directed. |
| 70 | S & F urinal speader fixed with complete fittings as per Cera cat no Cat. No. F8070201 or equivalent of other specified makes. |
| 71 | S & F in repair 5mm thick looking mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood on wall PVC plug and cup headed stainless screw etc complete all as specified and directed |
| 72 | S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screwscomplete all as specified. |
| 73 | S&F CP toilet paper holder fixed to walls complete all as specified and directed |
| 74 | S&F corner glass shelf assembly 250mm radius made of 6mm thick acrylic Glass glass, with CP railing, fixed with suitable rowal plug & screws complete all as specified and directed. |
| 75 | S&F Ceramic over the counter wash basin, glossy and polished finish super white colour oval shape (snow white) size 570 x 450x 135 mm with bottle trap complete all as directed. |
| 76 | S&F in repairs 15mm dia stop cock fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed . |
| 77 | S&F one piece EWC with soft close seat cover and twin flush fittings 735 x 370 x 765 mm (snow white) S trap 300mm and fittings as per Cat. No. S1013105 of Cera or equivalent of other specified makes. complete all as directed |
| 78 | S&F in repair 12mm thick Plywood grade BWP, type BB fixed with screws to timber frame work all as specified and directed |
| 79 | S&F 0.9mm thick Decorative laminates type I, or surface finish, colour and pattern as approved all as specified and directed |
| 80 | S&F for 6.3 mm thick sheet glass ordinary quality and glazing incl glass fitting fixed in Ply wood etc complete all as specified and directed. |
| 81 | Providing and laying Endura heavy-duty vitrified tiles of size exc 0.09 sqm but not exc 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 20 mm thick screed bed in CM(1:6) complete all as specified and directed. |
| 82 | Providing and fixing Stainless Steel Letters to MS Frame ( if Required ) with Rivets & Bolts, computer Design work, height of letter up to 12 inch complete all as specified and directed |
| 83 | Providing and fixing Stainless Steel 304 grade bright finished crests size of each 75cm width, 75 cm height & 05 cm depth in 2.5mm thick stainless steel plate including necessary fixing arrangements at any height complete all as specified and directed |
| 84 | Supplying and laying 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in floor/wall including taking up or down existing unserviceable tubing and connections complete all as specified and directed. |
| 85 | S&F in repair for 20 mm dia chromium plated pipes for curtain rods Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 86 | S&F for rotational moulded polyethylene water storage tanks ( cylindrical, vertical with closed top ) hoisted and fixed in position of 500 Ltrs capacity including taking down old one including 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight 210 gms) complete all as specified and directed. |
| 87 | S&F for rotational moulded polyethylene water storage tanks ( cylindrical, vertical with closed top ) hoisted and fixed in position of 1000 Ltrs capacity including taking down old one including 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight 210 gms) complete all as specified and directed. |
| 88 | S&F in repair 75 mm dia bore PVC (SWR) type 'A' pipes single socketed in any length with rubber ring joints fixed to walls complete including taking down old pipes all as specified and directed. |
| 89 | S&F in repair 110 mm dia bore PVC (SWR) type 'A' pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and directed. |
| 90 | S&F PVC (SWR) bends any radius 75 mm dia of bore, including taking down old bends all as specified and directed. |
| 91 | S&F in repair PVC (SWR) branch piece single equal of bore 75 mm dia, ,complete all as specified and directed |
| 92 | S&F PVC (SWR) bends any radius 110 mm dia of bore, including taking down old bends all as specified and directed. |
| 93 | S&F in repair PVC (SWR) branch piece single equal of bore 110 mm dia, all as specified and directed |
| 94 | Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc., of capacity exc 250 Ltrs but not exc 500 Ltrs all as specified and directed. |
| 95 | Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc., of capacity exc 500 Ltrs but not exc 1000 Ltrs all as specified and directed. |
| 96 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white complete as per Cat. No. S1053101 of Cera or equivalent of other specified makes all as specified and directed. |
| 97 | S&F in repair plastic water closet seat, black and white closed pattern with flat bottom and cover and mild steel chromium plated plated or aluminium hinging device complete all as specifed and directed. |
| 98 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets etc complete all as specified and directed. |
| 99 | S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets etc complete all as specified and directed. |
| 100 | M&L for 15 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and directed. |
| 101 | M&L for 20 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and directed. |
| 102 | S&F in repairs CP Bib taps(Long body) fancy type 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed. |
| 103 | S&F in repairs CP Bib two way taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed. |
| 104 | S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe etc complete all as specified and directed. |
| 105 | S&F in repairs swan neck pillar tap (make:Jaquar) complete all as specified and directed. |
| 106 | S&F in repair Angle cock of 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed. |
| 107 | S&F in repair for 15mm bore brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specifed and directed. |
| 108 | S&F in repair for 15mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specifed and directed. |
| 109 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 110 | S&F in repair for CP towel rail of 20 mm dia with hook 600mm long complete all as specifed and directed. |
| 111 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm, including taking down old PVC connection all as specified and directed. |
| 112 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 113 | Dismantling plain corrugated steel sheeting any gauage thick ness including Nainital and similar pattern complete all as specifed and directed. |
| 114 | S&F for Steel work in tubular trusses, frame work, grills etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc complete all as specified and directed. |
| 115 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. |
| 116 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified an directed. |
| 117 | S&F for 12 mm thick toughened glass door of approved colour with complete DORMA fittings with logo including floor spring, pivot hinge, handles, locking devices with duplicate key etc all as specified and directed |
| 118 | Removing demolished concrete materials etc.to a distance beyond the lead included in the rates, including loading, unloading and tacking at the destination exc 10.00 km total distance up to 20 KM complete all as specified and directed. |
| 119 | M&L for complete removal of existing treatment and applying Two coat of Weather proof exterior emulsion paint on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described over one coat of primer on old surface complete all as specified and directed. |
| 120 | M&L for preparation of old decorated plastered or unplastered surfaces of walls etc brooming down with steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading etc & greasy spouts including concrete pilasters etc. and applying one coat of oil bound distemper on walls complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender