Defence Statutory Bodies & Commissions/Committees Closing in 12 days TDR #58526485

Tender For Special Repair Of Bldg No T-17 (Block Of 10 Bathing Cubicles For Or) At Tech Area Op Unit Engrs, Provn Of New Drainage Main Gate 88 To New Airport Road, Soake Well And Septic Tank At Sadilapur And Provn Of Exhaust Fan For Various Bldg Of A

Issued by Statutory Bodies & Commissions/Committees · Kamrup Metro, Assam
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Dec 2026
12 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair Of Bldg No T-17 (Block Of 10 Bathing Cubicles For Or) At Tech Area Op Unit Engrs, Provn Of New Drainage Main Gate 88 To New Airport Road, Soake Well And Septic Tank At Sadilapur And Provn Of Exhaust Fan For Various Bldg Of Adhoc Transit Camp Sadilapur Under Ge Guwahati

BOQ

Name of Work:- SPECIAL REPAIR OF BLDG NO T-17 (BLOCK OF 10 BATHING CUBICLES FOR OR) AT TECH AREA OP UNIT ENGRS, PROVN OF NEW DRAINAGE MAIN GATE 88 TO NEW AIRPORT ROAD, SOAKE WELL AND SEPTIC TANK AT SADILAPUR AND PROVN OF EXHAUST FAN FOR VARIOUS BLDG OF ADHOC TRANSIT CAMP SADILAPUR UNDER GE GUWAHATI
Sl. No. Item Description
1B/R PORTION
2Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed.
3Supply and Fixing Prepainted galvalume aluminium zinc coating GI based profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.
4Supply and Fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, eave board fixed with self tapping screws complete all as specified and as directed..
5Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed.
6M&L for brickwork with subclass ‘B’ bricks straight or curved on plan not exceeding 6m mean radius, built in CM 1:4 complete all as specified and as directed.
7M&L for Brickwork with subclass ‘B’ bricks straight or curved on plan to any radius in half brick wall, built in CM 1:4 complete all as specified and as directed.
8Dismantling timber scantlings unframed work under 40 sq. cm in section as in fillets, rails, posts, rafters, purlins, etc. complete all as specified.
9S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde- E- 250) complete all as specified and directed.
10M&L Rolled mild steel plates (plain or chequered), channels, square cut or notched (ordinary or counter sunk) forming holes, with riveted, bolted or welded attachment etc, conforming to Fe-290 Gde E-165 compete as specified and directed
11S&F Mild steel screw bolts (machine made) with hexagonal heads at one end and screws other end to be fitted with washes and one hexagonal nut, exc 5cm and n.exc 10cm long and dia of neck 11 to 15 mm as specified and directed.
12M&L for preparation of new or previously untreated surface of iron and steel works of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete as specified and directed.
13Demolition Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, etc complete all as spfd and directed.
14S&F Anodised aluminium snap grid frame work of size 605 x 605mm for false ceiling all as specified and directed.
15M&L for 4 mm thick, Non asbestos fibre cement building boards fixed in ceiling or laid/ inserted to timber/GI/Aluminium frame work with screws, etc completed all as specified.
16Demolition of cement concrete on roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work etc complete all as spd and directed.
17M&L for PCC 1:3:6 type C-2 (Using 40 mm graded stone aggregate) in foundations, filling and mass concrete (sunken floor filling) complete all as specified and as directed.
18Demolition of cement concrete in ground floor or paving of any description n.exc. 15cm thickness (Un re-inforced) below or above GL complete all as specified and directed..
19M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in sub base and plinth protection, finished even and smooth w/o using extra cement complete all as specified and as directed.
20Taking down cement plaster on brick wall/stone wall, ceilings, sunken floors etc, racking out joints, hacking for key & scrubbing with water completely complete as specified and directed.
21M&L rendering 15mm thick plaster in two layers (10mm + 5mm) on brick or concrete surfaces in CM 1:4 mixed with WPC on second layer finished the surface even and smooth without using extra cement complete all as specified and directed. (Note- supply only WPC shall be measured and paid seperately).
22Supply only Liquid water proofing compound complete all as specified and directed.
23M&Lfor rendering 10mm thick plaster on other than fair faces of brick or concrete surfaces in CM 1:6 finished the surface even and smooth without using extra cement complete all as specified and directed .
24M&L for prepartion of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1.5mm thick wall care putty including primer complete all as specified and directed.
25M&L for preparation of new surfaces of wall and applying two coats of weather exterior acrylic emulsion paint over a coat of 1.5mm thick wall care putty including priming coat of exterior primer complete all as specified and directed.
26M&L for preparing new plastered surface of ceiling and applying two coats of white wash complete all as specified and directed.
27Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.
28M&L for non-skid ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.11sqm but not exceeding 0.18 sqm in floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick Screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed.
29M&L for glazed ceramic (coloured) tiles of size 450x350x6-7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing course in cement mortar 1:4 complete all as specified and as directed.
30Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. (Dismantling, Laid dry or laid and pointed) complete all as specified and as directed.
31M&L for Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms,over 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all as specified and as directed.
32M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platforms and other similar situations complete all as specified and as directed.
33Taking down chowkats or frames (without taking off shutter from the frame) not exc 1.5 sq.m each and removing complete all as specified and as directed.
34M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and as directed.
35S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.40 mm & fixed with stainless steel wire staples fixed complete all as specified and as directed.
36S&F solid PVC frame size 50mmx47mm made out of 5mm plain colour PVC sheet re-enforced with MS square tube complete all as specified and directed
37S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.
38S&F 150mm long aluminum handle febricated type anodised.complete all as specified & as directed.
39S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21.
40S&F 150mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.
41S&F 300mm aluminium anodised sliding door bolt, with hasp and staple, (bolt type) and fixing clips of sheet steel, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed
42S&F for 15 mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors, including taking up/down old tubing complete all as specified and as directed.
43S&F for 20 mm bore “medium grade” mild steel galvanised iron (GI) tubing with all fittings fixed to wall, ceiling or floors, including taking up/down old tubing complete all as specified and as directed.
44S&F in repair vitreous china squatting pan Orissa pattern size 580mm x 440mm white with integral foot rest, provn and fixing of 10 litres capacity low level PVC flushing cistern, PVC connection pipe 15mm dia 600mm long with two check nut and washer of including provision of lime concrete bedding, connection to trap and flush pipe etc as in floor all as specified and as directed.
45S&F in repair brass chromium plated 125mm size shower roses with or without swivel joints, any size, including fixing to steel pipe or union, etc complete all as specifed and directed.
46S&F 15mm dia Brass Stop valves/angle cock, screwed down, high pressure, chromium plated, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.
47S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including cutting for & pinning in ends of brackets or erracting stand but exclusive of fixing of supply of waste pipe complete all as specified and directed.
48S&F 15mm dia Pillar taps fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified and directed.
49S&F in repair 15 mm dia Bib cock fancy type with chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed
50S&F in repair 20mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
51S&F in repair Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 Bore of pipes in 32mm,as waste pipe etc completed all as spd and directed.
52S&F in repair 110mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and directed.
53S&F in repair 110mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.
54S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
55S&F 110mm bore PVC (SWR) junction, single (Single T) equal or unequal complete all as specified and directed.
56S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.
57S&F in repair 75 mm dia PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed.
58S&F in repair brass chromium plated soap dish of approximate size 160mmx160mm x90mm fixed to plugs with chromium plated brass screws complete all as specified and as directed.
59S&F in repair brass chromium plated tubular towel rail 20mm dia D type 60cm long between the flange fixed complete all as specified and directed.
60S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete as directed.
61Supply and fixing 1000 liters rotational moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I including dismantling of old existing water tank and removing from site complete all as specified and as directed.
62M&L for prepolished chequered cement concrete, coloured tiles, textured finished of size 250 x 250 x 25 mm thick / 300x300xx25mm set jointed in neat cement slurry and pointed with white cement and pigment in floors to match with colour of tiles, including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
63M&L for 100 mm thick PCC 1:2:4 type B2 using 40mm graded stone aggregate as in footpath/ hardstanding, finished fair and even complete all as specified and as directed.
64M&L for machine pressed precast concrete interlocking paver block glazed colour with grey cement and pigment any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid over 50mm thick sand bed layer complete all as specified and as directed. (Note:-Bedding layer of sand will be measured and paid separately)
65All as per item No.63.00 here-in-above but except paver block
66M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
67Excavation over areas n. exc 1.5 mtr deep and getting out soft/loose soil complete all as specified and directed.
68Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
69Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.
70M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6.00 m mean radius built in CM 1:6 complete as specified and directed.
71M&L for 15mm thick rendering with cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls and finishing the surface even and fair without using extra cement complete all as specified and as directed.
72M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
73M&L for cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate and finishing with cement sand mortar 1:4 as in benching to manholes/drain surface complete all as specified and directed.
74M&L for cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate as in coping including weathering, slightly rounded or chamfered angles and throating and including necessary form work cement complete all as specified and directed.
75Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilivers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished surfaces of concrete flat complete all as specified and as directed
76M&L for RCC (nominal mix) in (1:2:4) type B1 using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item
77M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
78M&L for mild steel TMT bars 5mm dia and over upto including 10mm dia as in stirrups, spacers and binders cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia, complete, all as specified and directed.
79S&F Mild steel framed work such as grills,gratings,etc.with ends of bars shouldered and/or riveted,or forged into spikes,framed guard bars, barred iron doors,ladders, framed balusters, walk ways,railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
80M&L for preparing new or previously untreated steel surfaces of any description, not otherwise describe not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
81M&L formwork to fair finished surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified.
82M&L formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofsetc not exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for rough finished surfaces complete all as specified.
83M&L for reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, shelves and the like complete all as specified and as directed.Note :- Reinforcement & formwork shall be measured and paid for separately.
84M&L for precast RCC (1:2:4) type B1 using 20mm graded crushed stone aggregate as in lcover slabs including necessary form work and set in CM (1:4) complete all as specified and as directed.Note :- Reinforcement shall be measured and paid for separately.
85M&L for 100mm PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in paving finish even and smooth without using extra cement at road cutting/ footpath complete all as specified and as directed.
86M&L for machine pressed cement concrete, coloured tiles of size 250 x 250 x 22 mm thick with grey cement and pigment and pointed in neat cement slurry in floors to matching with coloured of tiles, over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
87M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed. Note :- Measurment shall be taken only for inner girth.
88Add to (or deduct from) serial item No. here-in-above for each 25mm girth or part thereof over or under 30cm inner girth.
89Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc not exceeding 10sq.m on plan getting out in soft soil complete all as specified and as directed.
90M&L for Mild steel TMT bars 6 to 8mm dia, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.
91Excavating in trenches. n exc 1.5 m wide and depth exc 1.5m and not exc 3m, for foundation, etc n exc 10 sq m on plan and getting out soft/loose soil complete all as specified and as directed.
92Excavation over areas exc 1.5 mtr deep and not execeeding 3.0m deep and getting out soft/loose soil complete all as specified and directed.
93Excavation over areas exc 3.0 mtr deep and not execeeding 4.50m deep and getting out soft/loose soil complete all as specified and directed.
94M&L for Brickwork with sub class ‘B’ bricks in half brick thick honey comb walling, built in CM 1:4 complete as specified and directed.
95M&L for preparing of new treated plastered surfaces of wall and applying two coats of white wash complete all as directed.
96S&F PVC (SWR) 75mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
97S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.
98M&L for precast cement concrete (1:2:4) type B1, using 20mm graded crushed stone aggregate) as in precast wall etc etc. and setting in mortar complete with joints to match, set in CM 1:4 complete all as specified & as directed.
99M&L for loose filling with broken bricks n.exe 63mm complete all as specified and directed.
100M&L for 25 mm thick cement concrete type B-0,1:2:4 using 12.5mm graded stone aggregate, finished ement concrete surface even and smooth without using extra cement complete all as per specified and directed
101S&F 110mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
102M&L for concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested in PCC (1:3:6), type C-2, using 40mm graded stone aggregate for 150mm dia pipes complete all as specified and as directed.
103S&F salt glazed stone ware drain pipes of 150mm bore, grade `A', ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified and as directed.
104S&F salt glazed stone ware drain pipes of 200mm bore, grade `A', ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified and as directed.
105E/M PORTION
106Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and as directed.
107Taking down carefully UNSV main switch and DB's including MCBs of of any size make, type and capacity and depositing at site complete all as specified and directed
108M&L for concealed point wiring using approved colour coding (Red, Black and green for single phase circuits) complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 volts grade, IS-694 marked with valid CML No. and including drawn through non metallic rigid PVC Concealed conduit medium grade minimum 20 mm dia ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) and conduit accessories fixed on recesses of wall/ceiling/roof and chisselling on wall complete including PVC insulated multi-starnded copper conductor 1.5 Sqmm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complete for the following complete all as specified and as directed:-
109One light/ Fan controlled by one no one way switch complete all as specified and as directed.
110One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size complete all as specified and directed.
111One 3 pin 5 Amps socket outlet on same board with other switch complete all as specified and directed.
112All as per item No.2.03 above but wiring with 2.5 sqmm PVC FRLSH copper conductor unsheathed and 2.5 sqmm PVC FRLSH copper conductor unsheathed cable as earth continuity conductor for 6 pin 6/16 Amp switch socket combination on independent board.
113S&F Modular switch one way 5/6 Amp, 1 module, 240 Volts complete all as specified and as directed.
114S&F Modular multipurpose socket outlet 2/3 pin plug, 5/6 Amps, 2 module 240 Volts complete all as specified and as directed.
115Supply and fixing ceiling rose surface bakelite two to three terminal 65 x 50 mm three terminal 250/230 volts ISI marked complete all as specified and as directed.
116S&F LED tube light fitting, 1x20 watt, 220-240 volt, AC, invertor type with inbuilt rechargeable lithium battery back up for emergency operation, decorative box type complete with LED tube, electronic driver, holder, diffuser and automatic changeover during power failure with minimum of 3-4 hours battery backup suitable for wall/ceiling mounting including connecting up with three core flexiblwe copper conductor of suitable size from ceiling rose complete all as specified and as directed.
117M&L for sub main wiring with 4 Sqmm (nominal area) with two runss (Red for phase and black for neutral) of single core FRLSH PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including PVC regid concealed conduit/ PVC casing N Caping of adequate size but not less than 25mm dia & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including single core 4 Sqmm (nominal area) single core PVC insulated & unsheathed FRLS copper conductor green in colour duly connected to earth wire complete complete all as specified and as directed.. NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of PVC Conduit with accessories shall be measured as one length.
118Supply and fixing in repairs, factory made load line distribution board in sheet steel enclosure vertical double door type complete with 200 Amps rated tinned copper bus bar, TPN DB 4 WAY, 415 Volts suitable for 415 volt, 3 phase, 4-wire system including neutral link, earth bar, cable glands, gland plate, cutting/chasing for sinking in wall, painting, making good disturbed surfaces and including all fixing accessories. The DB shall be suitable for housing MCCBs as incomer (excluding MCCB) and outgoing MCBs complete all as specified and as directed
119Supply and fixing in repair MCB confirming to IS 8828/IEC 60898 (ISI marked), TPN, 415 volts, C Curve, 63 Amps, 10 KA, 4P complete all as specified and as directed.
120S&F MCB, SPN, 240 volts, 'C' Curve, 40 Amps, 10 KA, confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and as directed.
121S&F MCB, SP, 240 volts, 'C' Curve, 06 to 32 Amps, 10 KA, confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and as directed.
122Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB of 20 Amp, 240 volt, 10KA, C curve series rated capacity complete all as specified and as directed
123Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 380m sweep with blades and frame and louvers and making good to disturbed surface including taking down old and depositing to MES store yard complete all as specified and as directed.
124S&F LED Building security light fitting 35/36 watt in aluminium PDC housing, toughened glass cover, individual LEDs with secondary optics, covered with IP66 protection with inbuilt surge protection of minimum 5KV and repair/replacement warranty of minimum 3 years with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
125M&L for 40mm bore light grade GI pipe fixed as bracket, on wall any type, not less than 1.5 m long and bent to shape as required complete with sutiable clamp made out of 25x4mm Flat iron duly fixed 12mm dia nuts, bolts, washers etc fixed to pole complete with two coats of aluminium paint over a coat of red oxide complete all as specified and as directed
126Supply and fixing of electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified and as directed.
127M&L for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to earth lead wire 4 mm dia by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1 (using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar, funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary excavation and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I complete all as specified and directed.
128Supply and fixing switch piano flush type one way 5/6 Amp, 230 Volts complete all as specified and as directed.
129M&L for cutting circular hole at any type of wall of suitable for fixing exhaust fan of size 300mm/ 450mm sweep, grouting 04 nos 100mm long 12mm dia stud bolt including making good to disturbed surfaces of wall to match as per existing colour complete all as specified and as directed.
130Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with blades and frame and louvers and making good to disturbed surface complete all as specified and as directed.
131Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 450m sweep with blades and frame and louvers and making good to disturbed surface complete all as specified and as directed.
132S&F MCB SPN distribution board in sheet steel enclosure GLAZED DOOR, 8 ways, 240 Volts IP 43 protection, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09, fix with concealed wall including making good wall surface by plastering with suitable ratio of cement sand plater and civil work etc complete all as specified and as directed.
133S&F MCB, SPN, 240 volts, 'C' Curve, 32 Amps, 10 KA, confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and as directed.
134Supply, laying, jointing including testing in replacement, connecting, testing and commissioning of LT under ground cable sectional area 16Sqmm x 4.0 Core, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor, 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and as directed.
135M&L for 25 mm bore GI tubing medium grade in trenches/ floor/ pillar and connection in old or news position as per site requirement including fittings like socket/ union/ tee/ reducer nipple etc complete all as specified and as directed.
136S&F in repair 25mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58526485
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 04-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair Of Bldg No T-17 (Block Of 10 Bathing Cubicles For Or) At Tech Area Op Unit Engrs, Provn Of New Drainage Main Gate 88 To New Airport Road, Soake Well And Septic Tank At Sadilapur And Provn Of Exhaust Fan For Various Bldg Of Adhoc Transit Camp Sadilapur Under Ge Guwahati
Basic Detail
Tender No 8672/E8
Bidding Type Tender
Location
City Kamrup Metro
State Assam
Key Dates
Publish Date 13 Nov 2026
Submission Date 04 Dec 2026
Open Date 07 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 97000
Exemption Available
Document List
7e4cf420-4f62-4b7b-a83f-6cc37534eed6.html
8672Tender.pdf
BOQ_895925.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
html

7e4cf420-4f62-4b7b-a83f-6cc37534eed6.html

pdf

8672Tender.pdf

xls

BOQ_895925.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender