Tender For Repair And Painting To Steel And Wooden Furniture At Nahan Under Ge Chandigarh.
Tender Value
15 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
12 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Painting To Steel And Wooden Furniture At Nahan Under Ge Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | FD-220: Removing old unserviceable plastic niwar from charpoy GI pipe and reweaving with new plastic newar 50 to 55mm wide made out of first qualitythred in colour interwoven closely both on top and bottom with 34 beands on long rail and 14 bends on short rail as approved by GE complete all as specified & shown on drawing and as directed by Engr-in ChargeNote: (i) Recycled materials shll not be used in the work (ii) Weight of the nylon newer shall not be less than 1.5 kg / each charpoy |
| 2 | FD-03: M&L for re-canning to wooden chair Dining with 1STclass plastic cane 2mm wide half round white colour as per \\"Godrej\\" pattern including two coats PU polishing complete all as specified and as directed by Engineer-in-charge. |
| 3 | FD-229: M&L for re-canning to wooden chair Easy with 1STclass plastic cane 2mm wide half round white colour as per \\"Godrej\\" pattern including two coats PU polishing complete all as specified and as directed by Engineer-in-charge. |
| 4 | FD-229: M&L for re-canning to wooden chair Writing with 1STclass plastic cane 2mm wide half round white colour as per \\"Godrej\\" pattern including two coats PU polishing complete all as specified and as directed by Engineer-in-charge. |
| 5 | FD-258 & 359: M&L for re-canning of seat & back of chair verandha with 1st class plastic cane 4mm wide half round white colour in matt pattern and applying two coats of synthetic enamel paint white to complete chair before re-canning complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Taking out carefully old existing unserviceable lock of any size without any damage to the Almirah Steel and provided with new lock of any type Gde-1 qualite conforming to IS with duplicate keys, complete all as specified and as directed by Engineer-in Charge. |
| 7 | Taking out carefully old existing unserviceable handle from almirah steel and provided with new handle MS chromium plated,complete all as directed by Engineer-in Charge. |
| 8 | M&L for painting including denting if any applying two coats of synthetic enamel panint to almirah steel large on external surface only complete all as specified and shown on drawing (shade shall be approved by GE) |
| 9 | All as per above item No. 8 here in before but for almirah Steel Glazed. |
| 10 | All as per above item No. 8 here in before but for almirah Steel small |
| 11 | FD-357: M&L for seat cushion of foam 40mm density covered with resin & fixed cup nails for chair dinning complete all as specified and as directed by Engineer-in-Charge. |
| 12 | FD-357: M&L for long back cushion of foam 32mm density covered with resin & fixed cup nails for chair dinning complete all as specified and as directed by Engineer-in-Charge. |
| 13 | M&L for Seat cushion of foam 32mm density covered with resin & fixed cup nails for chair writing with back complete all as specified and as directed by Engineer-in-Charge. |
| 14 | M&L for repair to Front leg of chair easy /chair dining /chair writing by replacing unserviceable part in lieu of provided with new Front leg made of 'Shisham' wood including polishing with French polish to external suface of wood complete all as specified and as directed by Engineer- in - Charge. |
| 15 | All as per item no 14 above but Rear leg |
| 16 | All as per item no 14 above but Front/Side/rear rail |
| 17 | All as per item no 14 above but Arm |
| 18 | FD-231 & 224: M&L for repair to table with drawer of size 900mmx600 x 760mm by replacing unserviceable part in lieu of provided with new Table top 900mmx600x760 mm made out of 19mm thick HDHMR board & 4mm thick teak wood beading top with nails Complete all as specified and as directed by Engineer-in-Charge. |
| 19 | All as per above item No 18 here-in-before but table center(900mmx450mm) |
| 20 | All as per above item No 18 here-in-before but teapoy verandah (900x450mm) |
| 21 | All as per above item No 18 here-in-before but teapoy wooden (600x450mm) |
| 22 | All as per above item No 18 here-in-before but table peg (450mmx450mm) |
| 23 | All as per above item No 18 here-in-before but table writing med 1200mmx600mm) |
| 24 | All as per above item No 18 here-in-before but table cook steel top (300x900mm) |
| 25 | All as per above item No 18 here-in-before but table 6 persns |
| 26 | FD-220: Removing to unserviceable long rail having both threaded broken end and provided with new long rail of 32mm dia GI pipe medium grade ISI marked duly threaded both ends complete all as specified and as shown on drawing. |
| 27 | FD-220: Removing to unserviceable short rail having both threaded ends broken in lieu of provided with new short rails made out of 32mm dia GI pipe medium of broken long rail obtained from srl item No. 26 here-in-before, threading both ends of short rail and fixed in position complete all as specified and as directed by Engineer-in-charge. |
| 28 | FD-220: Removing to unserviceable legs and provided with new leg made out of short rail obtained from srl item No. 27 above threading and fixed in a position complete all as specified and as directed by Engineer-in-charge. |
| 29 | Removing to unserviceable 3 way elbow, 32mm bore in lieu of provided with new 3 way elbow , 32mm bore duly ISI marked fixed in position including cutting and welding complete all as specified and as directed by Engineer-in-charge. |
| 30 | Removing to unserviceable check nut and provided with new check nut of 32mm bore and 6mm thick and fixed in a position complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Removing of unserviceable wooden block from lower ends of leg and provided with new MS plate of 50mm dia x 3mm thick welded to lower end of leg complete all as specified and as directed by Engineer-in-charge. |
| 32 | FD-84: M&L for repair to table clerk steel (1200mmx600mm) with drawer by replacing of unserviceable Table top with new Table top made out of 19mm thick HDHMR board & 4mm thick teak wood beading around top fixed with nails Complete all as specified and as directed by Engineer-in-Charge. |
| 33 | Replacement of drawer lock of table clerk steel Lock with 2Nos Keys. |
| 34 | M&L for painting of two coats with synthetic enamel paint to steel surfaces of clerk table steel complete all as specified and directed. |
| 35 | M&L for repair to table officer steel (1350x770mm)with drawer by replacing of unserviceable Table top with new Table top made out of 19mm thick pre-laminated particle board & 4mm thick teak wood beading around top fixed with nails Complete all as specified and as directed by Engineer-in-Charge. |
| 36 | Replacement of drawer lock of table officer steel Lock with 2Nos Keys. |
| 37 | M&L for painting of two coats with synthetic enamel paint to steel surfaces of officer table steel complete all as specified and directed. |
| 38 | FD-1009: M&L for replacement of top of table dinning OR's size 900x900x750mm made out of 19 mm thick HDHMR board one side teak face and provided teak wood beading/edging of size 19mmx4 mm fixed around the top of Table duly painted with synthetic enamel colour complete all as specified and directed by Engineer-in-Charge. |
| 39 | FD-239: M&L for replacement of top of table Dinning officer (1500mmx900mm) 6 persons made out of 19mm thick HDHMR board one side teak face and provided teak wood beading/edging of size 19mmx4 mm fixed around the top of Table duly polished to beading complete all as specified and directed by Engineer-in-Charge. |
| 40 | FD-239: M&L for replacement of top of table dinning officer (1800mmx900mm) 8 persons made out of 19mm thick HDHMR board one side teak face and provided teak wood beading/edging of size 19mmx4 mm fixed around the top of Table duly polished to beading complete all as specified and directed by Engineer-in-Charge. |
| 41 | FD-281: Replacement to unserviceable foam cushion and provided with new foam cushion of size 530mmx560mmx100mm thick of 32 density covered with tapestory cloth & cloth stitched with best quality thread complete all as specified and directed by Engineer-in-Charge Make of foam cushion :-- Sleep well / Kurlon/ Feather foam. Note :-- Tapestory cloth shall be of minimum rate Rs 350/- per metre |
| 42 | FD-245 246 & 247: M&L for repair to bed ply wood by replacing unserviceable Head Rest covered with 3.5mm thick ply wood one side teak face other side commercial face Complete all as specified and as directed by Engineer-in-Charge. |
| 43 | All as per item No 42 above but Foot rest covered with 3.5mm thick ply wood one side teak face other side commercial face. |
| 44 | All as per item No 42 above but long rail made out of sheasham wood |
| 45 | All as per item NO 42 above but ply wood top made out of 12mm thick ply wood |
| 46 | All as per item No 42 above but ply wood top 7x3 made out of 12mm thick ply wood |
| 47 | All as per item No 42 above but ply wood top 7x4 made out of 12mm thick ply wood |
| 48 | FD-220: S&F as in repairs 12mm thick(1980mmx900mm size) both side commercial plywood top(ISI marked) BWR grade with & including MS Flat iron 32mmx5mm x 900mm long for 04 Nos in each charpoy having one Nos hole near each end of fixing the plywood top with purpose made round head mild steel nuts & bolts/washer welded and applying two coats of synthetic enamel paints in black colours over a coat of red oxided primer complete all as specified and directed by Engr-in-Charge. Note:- The rate quoted agianst the item shall deem to be included for necessary welding & painting works etc. complete all as specified and as directed by Engineer-in-Charge. |
| 49 | FD-1029: M&L for repair for lockers 100x600x760 mm PB sheet 1.00 mm thick shall be used through out steel hinges 65mm shall be using fixed with shutter and and CP handle 100mm long and CP hasp and staple 75x40x3mm shall be fixed with shutters 20mm dia CP conduit pipe 1.6mm thick with socket shall be provided, including cutting and welding rest all as per drawing including spray painting internally and externarly with two coats of synthetic enamel paint over a coat of red oxide zinc peimer complete all as specified and directed by Engr-in-Charge. |
| 50 | Preparation of old treated wood and wood based surfaces of any description over 10 cm in width or Sqm grith and applying two coats of PU polishing (finishing coat with PU) complete all as specified and as directed |
| 51 | Removing of unservicable old defaced mirrors unservicable back plywood of mirror frame of table dressing ladies and S&F sheet glass electro copper plated mirror 5mm thick and plywood commerical BWR grade 6mm thick for back side mirror frame and fixing to table all as specified and as directed by Engineer-in-charge. |
| 52 | All as per item No 51 here-in before but table dressing gents all as specified as directed by Engineer-in-charge. |
| 53 | Removing of unservicable top from the table dressing ladies and S&F new top made out of prelaminated particle board 18 mm thick with 3mm thick beading all as specified and as directed by Engineer-in-charge. |
| 54 | All as per item No 53 here-in before but table dressing gents all as specified as directed by Engineer-in-charge. |
| 55 | Removing of unservicable broken plywood from drawer bottom of table dressing ladies and S&F plywood commercial BWR grade 6mm thick all specified and as directed Engineer-in-charge. |
| 56 | All as per item No 55 here-in before but table dressing gents all as specified as directed by Engineer-in-charge. |
| 57 | Removing of unservicable sides and front side of drawer of table dressing ladies and S&F new 18mm thick prelaminated particle particle board of both sides & on drawer front side beading 3mm thick all specified and as directed Engineer-in-charge. |
| 58 | FD-281/373: All as per item No 57 here-in before but table dressing gents all as specified as directed by Engineer-in-charge. |
| 59 | FD-281/373: Removing of unserviceable broken plwood from back side board and S&F teek plywood commercial 6mm thick BWR grade in single piece all as per specified and as directed. |
| 60 | FD-241: Removing of unserviceable Top from side board and S&F new top of 18mm thick particle board (exterior grade) one side teak face and other side white with 3mm thick beading all as specified and as directed |
| 61 | FD-241: Removing of unserviceable sides from side board and S&F new side of 18mm thick particle board (exterior grade) one side teak face and other side white with 3mm thick beading all as per specified and as directed |
| 62 | FD-241: Removing of broken/unserviceable door shutter of side board and S&F new door shutter made out 18mm thick prelaminated particle board one side teak face other side white exterior grade with 3mm thick beading all as specified & as directed. |
| 63 | FD-241: Removing of unserviceable broken plywood from drawer bottom of side board and S&F plywood commercial 6mm thick 5 ply BWR grade all per specified and directed |
| 64 | FD-241: Removing of leg & frame removing of unserviceable particle board from bottom or side board and S&F 18mm thick or particle board one side teak veneer face and other side white with 3mm thick beading and fixing the leg frame to side board all as directed and as directed |
| 65 | FD-241: Removing of unserviceable particle bord from drawer front side bord and S&F 18 mm thick of new particle board & one side teak veneer face and other side white with 3mm thick beading all as specified and as directed |
| 66 | FD-241: Removing of unserviceable worn out existing shelf from the side board and S&F new shelf all as per size and as shown in drawing made out of 18mm thick prelminated particle board exterior grade all as directed by Engr in charge |
| 67 | FD-281/373: Removing the unserviceable front legs of sofa set and S&F new teak wood legs made to shape all per drawing and as directed (5 seater/single seater) |
| 68 | FD-281/373: Removing the unserviceable rear legs of sofa set and S&F new teak wood legs made to shape all per drawing and as directed. |
| 69 | FD-281/373: Removing the unserviceable arms of sofa set and S&F new teak wood arms made to shape all as per drawing and as directed . |
| 70 | FD-281/373: Removing the unserviceable stiffeners of sofa set and S&F new teak wood stiffeners made to shape all as per drawing and as directed. |
| 71 | FD-1113: Removing the unserviceable front & back rail of sofa set (3 seater/single seater) and S&F new rail of teak wood made to shape all as per drawing and as directed |
| 72 | FD-1113: Removing of unserviceable side rail of Sofa set (3 seater/single seater) and S&F new Teak wood rail all as shown in drawing & as directed by Engr in charge |
| 73 | FD-281/373: Removing the Unserviceable front legs of sofa set and S&F new teak wood legs made to shape all per drawing and as directed (4 x single seater) |
| 74 | FD-281/373: Removing the Unserviceable rear legs of sofa set and S&F new teak wood legs made to shape all per drawing and as directed. |
| 75 | FD-281/373: Removing the unserviceable arms of sofa set and S&F new teak wood arms made to shape all as per drawing and as directed |
| 76 | FD-281/373: Removing the unserviceable stiffeners of sofa set and S&F new teak wood stiffeners made to shape all as per drawing and as directed |
| 77 | FD-281/373: Removing the unserviceable front and back rail of sofa set (4x single seater ) and S&F new rail of teak wood made to shape all as per drawing and directed. |
| 78 | FD-281/373: Removing of unserviceable side rail of Sofa set (4x single seater) and S&F new Teak wood rail all as shown in drawing & as directed by engr in charge |
| 79 | FD/E6/MAP/10: Removing the unserviceable front legs of chair dining long back and S&F new teak wood legs made to shape all as per drawing and as directed |
| 80 | FD/E6/MAP/10: Removing the unserviceable rear legs of chair dining long back and S&F new teak wood legs made to shape all per drawing and as directed. |
| 81 | FD/E6/MAP/10: Removing the unservicable side rails of chair dining long back and S&F new teak wood rails made to shape all as per drawing and as directed |
| 82 | FD/E6/MAP/10: Removing the unservicable front rails of chair dining long back and S&F new teak wood rails made to shape all as per drawing and as directed |
| 83 | FD/E6/MAP/10: Removing the unserviceable bottom stiffeners of chair dining long back and S&F new teak wood stiffeners made to shape all as per drawing and as directed |
| 84 | FD/E6/MAP/10: Removing the unserviceable & worn out seat cushion with tapestry cloth from chair dining long back cushion and S&F new foam cushion 75mm thickof 40 density cushion of size as per drawing. |
| 85 | TP: Table Peg Special: Removing the Unserviceable peg table glass of size 2x2 feet and S&F new glass with thickness of 8mm as per drawing and as directed engr in charge |
| 86 | FD-375: Table center Special: Removing the Unserviceable table center glass of size 3''x 2'' feet and S&F new glass with thickness of 10mm as per drawing and as directed engr in charge |
| 87 | CHAIR VISITOR/CHAIR CBA CUSHIONED/ CHAIR WRITING MAP (FD/E6/MAP/12): Taking out old unserviceable seat and S&F New seat as per shown in drawing and directed by Engr-in-charge |
| 88 | Taking out old unserviceable back and S&F new back as per shown in drawing and directed by Engr-in-charge |
| 89 | All as per item no 88 above but chair writing MAP as per shown in drawing and directed by Engr-in-charge |
| 90 | Taking out old unserviceable Arms and S&F new Arms as per shown in drawing and directed by Engr-in-charge |
| 91 | All as per item no 90 above above but chair writing MAP as per shown in drawing and directed by Engr-in-charge |
| 92 | CHARPOY IP FOLDING PLY TOP (FD/E6/MAP-11/01): Removing the existing unserviceable plywood from charpoy, S&F new 8/9mm thick plywood commercial with screws and cup washer all as specified and directed. |
| 93 | Removing unserviceable hard rubber shoes of charpoy folding, S&F new hard rubber shoes all as specified and directed |
| 94 | CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05): Removing the existing unserviceable PVC seat from chair and S&F new PVC seat with complete fitting all as per shown in drawing and directed by engr in charge |
| 95 | Removing the existing unserviceable hand board with bracket from chair and S&F new 18mm thick particle hand board white on one side and other side teak face with bracket made to shape with 4mm thick beading all round all as specified and directed. |
| 96 | Removing unserviceable hard rubber shoes of chair school and S&F new hard rubber shoes all as specified and directed |
| 97 | TABLE BEDSIDE (MAP) (FD/E6/MAP/15 (R): Removing the existing unserviceable prelaminated particle board from top of bedside and S&F from new 18mm thick prelaminated particle board exterior grade ISI marked one side teak faced all as specified and directed |
| 98 | All as per item no 97 above but from bottom side of table bedside ISI Marked |
| 99 | All as per item no 97 above but but from sides of table bedside ISI Marked |
| 100 | Removing the existing unserviceable plywood from back side of bedside, S&F new 6mm thick plywood commercial all as specified and directed |
| 101 | Removing the existing unserviceable upper drawer made out of prelaminated particle board from bedside and S&F new drawer made out of 18mm thick prelaminated particle board one side teak faced with drawer bottom of 6mm thick plywood all as specified and directed |
| 102 | All as per item no 101 above but above but lower drawer |
| 103 | BED PLYWOOD TOP (MAP) (FD/E6/MAP/00 (R):Removing the existing unserviceable prelaminated particle board from head rest of bed and S&F from new 18mm thick prelaminated particle board both side teak faced exterior grade ISI marked all as specified and directed by Engr-in-charge |
| 104 | All as per item no 103 above but foot rest |
| 105 | Removing the existing unserviceable MS square pipe stiffeners from bed and S&F new 25mm square pipe 1.6mm thick all as specified and directed |
| 106 | Removing the existing unserviceable ply top from bed and S&F new 12mm thick ply with suitable screws all as specified and directed |
| 107 | Removing the existing unserviceable hard rubber shoes from bed and S&F new hard rubber shoes to the legs of bed all as specified and directed |
| 108 | Table computer (FD/E6/MAP/03):Taking out old unserviceable top of table computer and S&F new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drawing and directed by Engr-in-Charge . |
| 109 | Refiting the complete structure with pvc clamp piono type hinges, rubber shoe ,screws and washer to make it functional after tightening the loose parts all as shown in drawing. |
| 110 | S&F new sliding channel of key board all shape and size as shown in drawing. |
| 111 | Chair Easy Steel with back : Seat cushion and back of foam 40 mm density covered with resin & fixed cup nails for chaireasy steel with back and applying two coat of synthetic enamel paint to complete chair all as specified and as directed by Engineer-in-Charge. |
| 112 | Replacement to unserviceable foam cushion and provided with new foam cushion of size 530mmx560mmx100mm thick of 40 density covered with tapestory cloth & cloth stitched with best quality thread complete all as specified and directed by Engineer-in-Charge Note:- Tapestory cloth shall be of minimum rate 350/-per metre |
| 113 | Note: For the purpose of arriving at lumpsum amount, the amount of credit schedule i.e Sch 'A' section II (i.e Rs 13,645.00 shall be deducted from the total amount arrived. |
| 114 | Total of Schedule 'A' Rs. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender