Tender For Special Repair To Overhead & Ug Cable System And Connected Works At Jalapahar Under Age (I) Darjeeling
Tender Value
23.77 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
21 days left
EMD
47600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gangtok → sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Overhead & Ug Cable System And Connected Works At Jalapahar Under Age (I) Darjeeling
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old unserviceable UG cable 240 sqmm any make complete all as specified and directed by Engr-in-Charge. |
| 2 | Taking down old unserviceable UG cable 16 sqmm 4 core to 35 sq mm 3.5 core complete all as specified and directed by Engr-in-Charge. |
| 3 | Taking down old unserviceable UG cable 10 sqmm 2 core to 10 sqmm 4 core complete all as specified and directed by Engr-in-Charge. |
| 4 | Excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated hard/dense soil complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for Removal of surplus soil to a distance not exceeding 50 m and depositing where directed by Engr-in-charge. |
| 7 | Supply and lay in trenches, fixed to wall/pole DWC Pipes (Double Wall Corrugated) of dia 90 MM for carrying UG Cable complete all as specified and directed. |
| 8 | Supply and lay in trenches, fixed to wall/pole DWC Pipes (Double Wall Corrugated) of dia 50 MM for carrying UG Cable complete all as specified and directed. |
| 9 | Supply and lay in trenches, fixed to wall/pole DWC Pipes (Double Wall Corrugated) of dia 40 MM for carrying UG Cable complete all as specified and directed. |
| 10 | M&L GI pipe light grade 25 mm dia complete with all fitting laid in ground/trench for protection of cable all as directed and specified. |
| 11 | M&L GI pipe light grade 40 mm dia complete with all fitting laid in ground/trench for protection of cable all as directed and specified. |
| 12 | M&L GI pipe light grade 80 mm dia complete with all fitting laid in ground/trench for protection of cable all as directed and specified. |
| 13 | Supply and lay in trenches, fixed to wall/pole UG Cable XLPE insulated screened PVC beded galvanised steel strip or wire armed heavy duty electric cable with multi stranded Aluminium conductor, 1100V grade of following size complete all as specified and directed. |
| 14 | ditto all as above but size 240 Sqmm 3.5 Core |
| 15 | ditto all as above but size 35 Sqmm 3.5 Core |
| 16 | ditto all as above but size 25 Sqmm 4 Core |
| 17 | ditto all as above but size 16 Sqmm 4 Core |
| 18 | ditto all as above but size 10 Sqmm 4 Core |
| 19 | ditto all as above but size 10 Sqmm 2 Core |
| 20 | Supply, lay, commissioning and testing of cable jointing Kit for 1100 V grade cable for outdoor End Termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 240 Sqmm in any posn panel, pole, plinth etc complete all as specified and directed. |
| 21 | Supply, lay, commissioning and testing of cable jointing Kit for 1100 V grade cable for outdoor End termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25 Sqmm to 50 Sqmm in any posn panel, pole, plinth etc complete all as specified and directed. |
| 22 | Supply, lay, commissioning and testing of cable jointing Kit for 1100 V grade cable for outdoor End termination heat shrink type joint complete with jointing material and accessories suitable for 6 sqmm 2 core to 16 Sqmm 4 core armoured aluminium conductor cable in any posn panel, pole, plinth etc complete all as specified and directed. |
| 23 | Supply and fixing in Repairs/Replacement of MCB single pole, single phase circuit of 6 to 32 Amp, breaking capacity 10 KA,\\"C\\" curve,230V complete all as specified and directed. |
| 24 | M&L for fabricated CECA outdoor junction box (250mm X 200mm X 150mm) powder coated with hinge operated front opening door suitable for cacle entry and oit upto 16sqmm four core duly fixed with dinrail and connector/bus bars suitable for 3 phase cable incl clamps nut, bolts and washer etc complete all as specified and as directed. |
| 25 | Material and Labour for earthing complete with Copper earth plate electrode 600 x 600 x 3.15 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to Copper Strip 20x3mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Pt I including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick RCC ( 1:2:4) type B-1 cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar) including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade) wire mesh, lugs, complete in all respect, GI earth strip protected by 40 mm bore (light grade) galvanized iron pipe and other end connected with main switch board or earthing test point as directed including proper lugs, including disposal of soil to a distance not exceeding 50 mtr and necessary testing on completion complete all as specified and as directed. |
| 26 | Supply, install, commissioning and testing in repairs cubical type CPRI approved factory made outdoor type LT panel board floor mounted, dust & vermin proof with front & back openable doors and necessary locking arrangement incl addl hasbolt made out of suitable MS angle iron frame work, CRCA sheet of 3 mm thick and continuous welding and painted with powder coated paint. The panel shall suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system with 4 Nos 500 Amps rated Aluminium bus bar duly mounted on hygroscopic insulator and connection of all accessories with suitable size PVC insulated copper conductor, thimbles, glands, separator etc for internal connections and the panel shall mounted on suitable MS angle iron base frame and legs complete all as specified and as directed. [Note:- Drawing & design as per CPRI norms shall be approved from AGE (I). (ii) Certificate from panel builder shall be submitted to the department] |
| 27 | INCOMING :- (a) MCCB 250 Amp, 4 Pole , 415 Volts rating with,Adjustable Over load setting (Breaking capacity 36 KA) Ics=100% of Icu. (b) Digital Amp meter with selector switch & CT coil -02 Set(c) Digital Volt meter with selector switch (L&T) -02 Set |
| 28 | OUTGOING :- MCCB 100 Amp, 4 Pole , 415 Volts rating with Adjustable setting (Breaking capacity 25 KA) - 02 NosMCCB 63 Amp, 4 Pole , 415 Volts rating with Adjustable setting (Breaking capacity 25 KA) - 03 NosMCB SP 32 Amps C Curve 10 ka - 01 Nos |
| 29 | M&L for fabrication of LED glow sign board size 4 x 3 ft complete all in repect as per specification below :-(a) Frame Made of MS square bar of size 25x25mm (medium).(b) Display surface front face made 2 mm thick acrylic sheet/3mm ACP sheet/high-quality flex. MS square bar of size 25x25mm with anti-rust coating with powder coated GT sheet No 25.(c) LED illumination fitted with high-brightness LED modules/strip.(d) Back panel made of GI sheet (0.5-0.8mm thick)/ACP board properly fixed to frame.(e) All components weatherproof and suitable for humid/outdoor conditions. proper sealing to prevent dust and moisture ingress. |
| 30 | M&L for cutting existing road/hard standing not exc 20x45 cm in wide & depth getting out excavated material for laying cable/GI tube, returning filling & well ramming watering finish suraface 10 cm from top using PCC 1:3:6; including removal of surplase soil complete all as mspecified and directed by Engr-in-Charge. |
| 31 | Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates.Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender