Tender For Repair And Maintenance Of Certain Joinery, Insulation, False Ceiling, Internal Electrification & Misc Works In Aor Of Age B/R-I Under Ge 873 Ews
Tender Value
32.95 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
17 days left
EMD
66000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Certain Joinery, Insulation, False Ceiling, Internal Electrification & Misc Works In Aor Of Age B/R-I Under Ge 873 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n. exc 4 Sqm each (Steel/Wooden/PVC) complete all as specified and directed. |
| 2 | S & F plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints etc complete all as specified and directed. |
| 3 | S&F 40 mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particles board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed. |
| 4 | S & F butt hinges 100mm, medium weight, cold rolled mild steel and fixed complete all as specified and directed. |
| 5 | S & F 250mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 6 | S & F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 7 | S & F 150mmAluminium handles, cast type, anodised complete all as specified and directed. |
| 8 | M & L for preparation of newly wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed |
| 9 | Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed. |
| 10 | S&F Galvanised MS sheeting of 0.63 mm thick corrugated ISI Marked with two cougation side laps and fixed with coach screw and washers as in roof & wall complete all as specified and directed. |
| 11 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 12 | S&F plain, galvanised MS sheeting of 0.63 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 13 | Complete all as per item No 12 above, but except sheets complete all as specified and directed. |
| 14 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25 mm complete all as specified and directed. |
| 15 | 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 25 mm dia incl complete all as specified and directed. |
| 16 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 17 | S & F in repairs 15mm bore bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 18 | S & F in repairs 15mm Stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uniuns and fixed complete all as specified and directed. |
| 19 | S & F in repairs PVC Connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 20 | S & F puff water tank 500 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform, incl. dismantling old one, complete all as specified and directed. |
| 21 | S&F ,600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 22 | Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets complete all as specified and directed. |
| 23 | M&L for 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls complete all as specified and directed. |
| 24 | M&L 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in ceiling complete all as specified and directed. |
| 25 | S&F in repair for second class softwood 1.218m x 0.198m x 8mm thick non glue laminated wooden boarding as in flooring including 0.6mm PE poly moisture foam as in underlay barrier of overlapping 20cm fix them with adhesive tape, boarding fix in floating manner incl taking down complete all as specified and directed. |
| 26 | S&F in repair wallpaper of self -adhesive vinyl, removable, waterproof and easy to apply without extra glue including cleaning, dusting and priming unveven surfaces using primer complete all as specified and directed. |
| 27 | S & F GI frame work of size (605 x 605) mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre /nnintermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, Hangers 6 mm dia. GI. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long complete including 04mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws incl taking down & refixing all electric fittings, fixture and wiring complete all as specified and directed. |
| 28 | Dismantling timber framed in fillets,rails, posts rafters,purlines, etc under 40 sq cm in section complete all as specified and directed. |
| 29 | M&L second class Hardwood plain filllets, rectangular in section, clean swan, secured with nails exc 13 and n.exc 25 Sqcm complete all as specified and directed. |
| 30 | M & L for 12mm width teak wood lipping 6 mm thick for Partical board/block board complete fix with nail complete all as specified and directed. |
| 31 | M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified and directed. |
| 32 | M & L for preparation of old painted steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 33 | Supply and Installed puff water tank capacity 1000 Ltrs insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature (-) 30 degree to (+) 35 degree celcius fixed in position with all fittings over PCC platefrom, incl. dismantling old one, complete all as specified and directed. |
| 34 | M&L in repairs 4mm thick ordinary quality sheet glass and glazing with oil putty in square not exc 0.5 Sqm in each pane including hacking out old broken glasss complete all as specified and directed. |
| 35 | Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed. |
| 36 | Taking down of MCB DB/TPN 8 way including MCB SP and SPN and making good of wall complete all as specified and directed. |
| 37 | M&L for point wiring using 1.5 Sqmm single core FRLSH PVC insulated unsheathed multi stranded copper conductor cable 1100V grade drawn through with incl PVC casing in capping /conduit (size of as required at site but not less than 20mm) with accessories like bends tees, junction boxes and terminal boxes for mounting fittings etc. fixed on recessed in wall or ceiling etc including 1.5 Sqmm single core FRLSH PVC insulated but unsheathed multistrandard copper conductor cable 1100V grade as earth continuity wire connected to common earth dolly with incl factory made GI sheet sunken box , cover plate and making good disturbed surface of walls, floors, etc. complete all as specified and directed. |
| 38 | One light/fan point controlled by one 5 Amps one way switch |
| 39 | One 3 pin socket outlet 5 Amps on independent board |
| 40 | M&L point wiring for power point with 2.5 sqmm (nominal area) copper conductor FRLS-H cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC Casing & Caping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including steel sunken box/Gang Box of suitable size and shape with modular cover plate ISI marked complete all as specified and directed. |
| 41 | S & F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specified and directed. |
| 42 | S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed. |
| 43 | S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose) complete all as specified and directed. |
| 44 | S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.Make Havells /Legrand /L&T |
| 45 | Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 46 | Supply and fixing MCB SPN 240V, 10KA 'C' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 47 | Supply and fixing LED high bay light 90 watt 230 V AC indoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp with all hanging arrangement complete all as specified and directed.Make Havells / Bajaj / Philips. |
| 48 | Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in nmultiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.lm/Watt). |
| 49 | Supply and fixing LED flood light 210 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. |
| 50 | Supply and fixing low intensity aviation light 230 V AC outdoor type,red colour with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp with all mounting arrangement complete all as specified and directed.Make Havells / Bajaj / Philips . |
| 51 | M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion complete all as specified and directed. |
| 52 | Deduct Schedule of Credit of as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender