Defence Statutory Bodies & Commissions/Committees Closing in 13 days TDR #58526426

Tender For Misc Maintenance Works Of Central Heating System And Connected Works At Partapur Area Under 873 Ews

Issued by Statutory Bodies & Commissions/Committees · Leh, Ladakh
Tender Value
35 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
13 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Misc Maintenance Works Of Central Heating System And Connected Works At Partapur Area Under 873 Ews

BOQ

Name of Work:- MISC MAINT WORKS OF CENTRAL HEATING SYSTEM AND CONNECTED WORKS AT PARTAPUR AREA UNDER 873 EWS
Sl. No. Item Description
1M&L for dismantling oil fired boiler of 3/4 Lakh K.Cal/hour capacity any model by any make unscrewing and removal of boiler side/end plates, taking out burner, CHS control panel, cleaning drum and hot water coil with scalent de-carbonizing, scraping out carbon ,dirt accumulated in drum and across coil, overhauling, servicing incl re- assembling all the dismantled component to its original position with testing and commissioning, complete all as specified and directed.
2M&L for dismantling oil fired boiler of 2 Lakh K.Cal/hour capacity any model by any make unscrewing and removal of boiler side/end plates, taking out burner, CHS control panel, cleaning drum and hot water coil with scalent de-carbonizing, scraping out carbon ,dirt accumulated in drum and across coil, overhauling, servicing incl re- assembling all the dismantled component to its original position with testing and commissioning, complete all as specified and directed.
3M & L for disconnecting and taking up/down CHS pump set of 3 to 7.5 HP of any type from foundation and transporting to authorized workshop carry out repairs such as replacement of pump bearing and overhauling including replacement of minor unserviceable components/spares like 'O' rings, Oil seal, shaft bush, gland packing, casing ring, gasket packing and greasing, welding, metaling, turning, polishing, Lathe work etc. along with replacement of major components/spares as per manufactures instruction and testing after repairing and reconnecting at site including re-commissioning and testing to ensure efficient and smooth functioning to achieve desired discharge of pump set etc complete all as specified and directed.Note:- Defective major components/spares if required shall be measured as Supply under respective item 3.01 to 3.04 here-in-after and labour element included in this item for replacement Note:- Spares parts required for repair work will be measured in relevant item of BOQ
4Supply of high carbon steel pump shaft as per existing shaft sample
5Supply only stainless steel ball bearingas per existing sample
6Supply only impeller with impeller key as per existing sample
7Supply only Mechanical seal as per sample for centrifugal pump
8Supply and replacement air release key as per sample for centrifugal pump
9Supply and replacement nut, bolt and washer as per sample for centrifugal pump set
10M&L for rewinding of 3 phase electric motor of 3 to 7.5 HP with super enameled copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, varnish and tape, etc refixing motor at is own position after rewinding and testing the motor at site on full load complete all as specified and directed.
11M&L for disconnecting and removal of burner assembly, servicing , cleaning of burner for de-carbonized/deposited on combustion tank/blast tube with cleaning acid scalent and fixing of burner nozzle for smooth functioning and re-assembling burner and fixed to its original position with testing, complete all as specified and directed. Note:- Defective major components/spares if required shall be measured as Supply under respective item 07.01 to 07.10 here-in-after and labour element included in this item for replacement
12Supply only burner nozzle jet suitable for burner
13Supply only photocell suitable for burner
14Supply only fuel pump suitable for burner
15Supply only flexible metal fuel pipe line suitable for plant
16Supply only fuel filter
17Supply only magnetic lead(Electrode)
18Supply time relay suitable for CHS burner assembly
19Supply only contactor 10 to 15 Amp
20Supply only Normally open and Normally closed switch
21Supply only fuel Ignition transformer suitable for burner
22M&L for taking down carefully by disconnecting and removing fan coil units of different sizes from hot water circulation line for cleaning with scalent remove the scale and dirt accumulated in copper tube, cleaning the filter, fins and cleaning of radiator parts of FCU and welding /brazing where ever necessary and arrest the leakage in the copper tubing with welding/brazing of the body incl re-assembling and connect the same to its original position, testing complete for smooth flow of water, complete all as specified and directed. Note:- Defective major components/spares if required shall be measured as Supply under respective item 08.01 to 08.06 here-in-after and labour element included in this item for replacement
23Supply only blower motor as per existing sample
24Supply only PCB board as per existing sample
25Supply only fan for blower motor as per existing sample
26Supply only Relay as per existing sample
27Supply only LED Display as per existing sample
28Supply only capcitor as per existing sample
29M&L for disconnecting hot water inlet & outlet of glycol base storage tank of capacity 1000 Ltrs draining out complete old water cleaning, removal of sludge accumulated by scraping out, washing with scalent/acid for properly cleaning and welding wherever necessary to arrest leakages with re-assembling the disconnected pipes to original position and filling water including refilling/ charging of glycol (monoethylene glycol) MEG concentrate along with necessary additives and inhibitor in cognition and mixed in ratio 40% (glycol concentrate) 60 % of water and the freezing temperature of mixture shall be -40 degree centigrade, complete all as specified and directed. Note : Monoethylene glycol will be measeured and paid seperately
30S&Fing in replacement of fan coil unit with new fan coil unit of 2 KW, 250 CFM capacity High Wall mounted alongwith Inlet outlet valves and remote control complete all as specified and directed.Make-Carriyer/Bluestar/Voltas.
31S&F in replacement of fan coil unit of 2.5 KW 300 CFM capacity High Wall mounted alongwith Inlet outlet valves and remote control complete all as specified and directed.Make-Carriyer/Bluestar/Voltas.
32S&F replacement of monoblok pump motor for circulation of hotwater 5HP 3 phase 415 volt 50 Hz complete all as specified and directed.
33S&F replacement of monoblok pump motor for circulation of hotwater 3HP 3 phase 415 volt 50 Hz complete all as specified and directed.
34S&F replacement ball brass valve with adapter screwed both ends of 15 MM bore suitable for heat radiator hot water inlet/outlet, complete all as specified and directed.
35S&F in replacement of metal coupling as per sample for pump set, complete all as specified and directed.
36S&F in replacement of rubber star couppling as per sample, complete all as specified and directed.
37S&F PVC flexible pipe with steel wire insulated model SAE 100 RIAT 1/2\\" suitable for fixing with heat radiator hot water inlet and out let with locking clips, complete all as specified and directed.
38S&F in replacement of chimney exhaust extension pipe of size 200 mm dia MS ERW duly welded in muliple length incl special such as double end flanged, bend and nut bolts & washers of suitable size etc complete all as specified and directed.
39S&F in replacement of 3 phase sequence controller 50 Hz AC as per sample complete all as specified and directed.Make : L&T/Havells/Legrand Please Enable Macros to View BoQ information
40S&F in replacement of 3 phase sequence controller 50 Hz AC as per sample complete all as specified and directed.Make : L&T/Havells/Legrand Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58526426
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 35 Lakhs
LAST DATE 03-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Misc Maintenance Works Of Central Heating System And Connected Works At Partapur Area Under 873 Ews
Basic Detail
Tender No GE/873/EWS-84/2026-27
Bidding Type Tender
Location
City Leh
State Ladakh
Key Dates
Publish Date 13 Nov 2026
Submission Date 03 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 35 Lakhs
Tender Fee 500
EMD 70000
Exemption Available
Document List
BOQ_895900.xls
d7389bad-f886-40e2-ba2d-c0f0ec6847ee.html
Tender84.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_895900.xls

html

d7389bad-f886-40e2-ba2d-c0f0ec6847ee.html

pdf

Tender84.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender