Tender For Addition/ Alteration And Special Repairs To Building No P-114 At installation Dronacharya Under Ge Fort Kochi
Tender Value
24.30 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
17 days left
EMD
48600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration And Special Repairs To Building No P-114 At installation Dronacharya Under Ge Fort Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old existing water proofing APP membrane only of any thickness from the roof surface, parapets, Roof projection facia, and walls and removing out of MoD land complete all as specified and as directed. |
| 2 | Demolition of cement concrete including cement screed roof tiles of any description and in any position not otherwise specifically provided for and removing out of MoD land complete all as specified and directed. |
| 3 | Cutting V-groove/U-groove of size 5 mm wide × 10/15 mm deep along the cracks on the top surface of the terrace mother slab wherever cracks observed, thoroughly cleaning the groove with an air blower or wire brush to remove dust and loose particles, providing and applying approved two-part, solvent-free, low-viscosity properly mixed epoxy resin into the groove complete all as specified and as directed. Make:- SIKA (Sikadur-52 / Sikadur-55 LP)/ Asian Paints (SmartCare APCOREP Epoxy Inject Grout)/ Dr. Fixit Epoxy Injection Grout (EIG)/ Fosroc (Nitofill EPLV)/ Bostik LVEP |
| 4 | Material and labour for carefully chipping the edges of existing RCC slab cutouts to expose the aggregate and provide a mechanical key including removal of loose concrete, dust, and cleaning with compressed air. Drilling holes into the existing RCC slab for rebar dowels using a rotary hammer drill, depth shall be minimum 100mm, inserting reinforcement bars and ensuring zero air voids in the epoxy. Application of an Epoxy-based Bonding Agent (old-to-new concrete bridge) to the chipped vertical faces of the existing slab just prior to casting. Supplying and pouring Micro-Concrete or Non-Shrink Concrete to fill the cutout including shuttering/formwork from the underside and finishing top surface complete all as specified and as directed. |
| 5 | Supplying, cutting, bending, and placing TMT reinforcement bars (Fe500/Fe550) and tying with GI binding wire including injecting high-strength Pure Epoxy Resin (e.g., Hilti HIT-RE 500 V3 or Fosroc Reebafill) into cleaned holes and Inserting reinforcement bars and ensuring zero air voids in the epoxy complete all as specified and as directed. |
| 6 | Material and labour for preparation for chemical waterproofing treatment as per following specification complete all as specified and as directed by Engr-in-Charge :(i) Grinding the RCC roof slab surface with mechanical grinder to make the surface even and remove all the undulations, followed by cleaning, washing, removing all dirt/ dust using electrical blower complete all as specified and as directed. (ii) Applying cement slurry coat admixed with SBR Latex as per manufacturer’s instructions over the cleaned surface and providing and laying 45 GSM fibre mesh embedded in cement slurry. (iii) Finishing the depressions using polymerised mortar admixed with SBR Latex. |
| 7 | Material and labour for providing and fixing 150 gsm non-woven Polypropylene geo textile membrane with overlap of minimum 50mm as protective medium before screed concrete works over waterproofing treatment complete all as specified and as directed. |
| 8 | Material and labour for M20 grade Ready mix concrete layer as in screed concrete course laid in panels over roof treatment including necessary formwork and filler boards to maintain proper slope, finished even and smooth without using extra cement complete all as specified and as directed. |
| 9 | Material and labour for application of Waterproofing Treatment using Liquid-Applied Pitch-Free Polyurethane Membrane as per following specification complete all as specified and as directed :- (i) Applying one coat of two-component water-dispersible epoxy primer, mixed strictly as per manufacturer's instructions and diluted with double quantity of clean water (1:2 by volume), applied uniformly using a roller at a coverage rate of 8.0 to 10.0 Sqm (diluted mix). The applied primer shall reach tack-free condition before water proofing coating is applied.(ii) Application of Two coats of Single-component, liquid-applied, pitch-free polyurethane (PU) elastomeric waterproofing membrane (Pitch-Free) of DFT 1.30 mm with a coverage of 2 kg/Sqm, with roller that cures by reaction with atmospheric moisture to form a tough but flexible waterproofing membrane, The second coat should be applied in perpendicular direction to the First coat. Termination to be done on wall extending the coating to min.150mm height above the finished floor level. Notes: (i) Flood Test Prior to placement of screed protection, flood to a minimum depth of 50mm of water for 24 hours. Drains shall be plugged and barriers placed to contain the water. (ii) Item Nos. 3 to 9 shall be executed strictly through approved specialist applicators. The contractor shall submit the manufacturer’s applicator certificate, material purchase invoices, and a legal guarantee certificate prior to payment. Make: Fosroc Nitoproof 600 PF/ Asian Paints (SmartCare PU Magnum)/ Sika (Sikalastic®-591)/ Dr. Fixit (Flexi PU 270(I))/ Bostik (Dampfix PU) |
| 10 | Material and labour for chipping and removing all damaged and de-bonded/spalled concrete and plaster from the roof projections, facia, ceilings, chajja, columns etc manually or mechanically so as to expose the corroded reinforcement bars, complete all as specified and as directed. |
| 11 | Material and labour for application Rust Remover to remove the excess rust on the surface of the reinforcement bars and leave it for one day, The surface to be wiped and cleaned. After 24 hours Anti-corrosion coating of Zinc primer on the reinforcement bars to prevent further corrosion complete all as specified and as directed. Make :-Fosroc/ Asian Paints/ SIKA/ Dr Fixit/ Bostik |
| 12 | Material and labour for application of a coat of epoxy-based bond coat over the entire spalled surface to receive the forthcoming repair mortar and plastering with SBR bonding agent chemical cum cement mortar/concrete modifier modified cement mortar (1:4) to an average thickness of 30-40 mm (applied in two layers not exceeding 20mm each), including the cost of all materials, scaffolding as required complete all as specified and as directed. Make :- Fosroc/ Asian Paints/ SIKA/ Dr Fixit/ Bostik |
| 13 | Dismantling wrought iron or mild steel work as in walls, holdfast / MS angles inserted in walls, & MS Railing etc of any description not otherwise provided for, complete all as specified and as directed. |
| 14 | Material and labour for providing and fixing stainless steel (Grade 316 Marine Grade) railing, balusters, window grills made of hollow tubes & other sections, frame work etc including welding, grinding, buffing, polishing and making curvature (wherever required) with necessary accessories, like bends, decorative cups etc including core cutting for fixing the railing with stainless steel bar hold fast, dash fasteners, nut bolts etc, to the slab, steps, columns, beams, etc with suitable arrangement, complete all as specified and directed. Note: (1) Make and Grade shall be clearly engraved on each sections. |
| 15 | Material and labour for PCC type D-2, 1:4:8, using 40 mm graded stone aggregate as in sub base, mass concrete, filling duct etc. complete all as specified and as directed. |
| 16 | Taking down chowkats or frames not exc. 1.50 Sqm each with shutters (without taking off shutters from the frame) etc. complete all as specified and as directed. |
| 17 | Taking down chowkats or frames exc. 1.5 Sqm and not exc 4.00 sqm each with shutters (without taking off shutters from the frame) etc. complete all as specified and as directed. |
| 18 | Supply and fix factory made Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will be metered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mmx 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) Notes: (i) The unit rate quoted by contractor excludes cost of glass and includes wire mesh and all other connected accessories. (ii) Glass shall be measured in respective item of BoQ as supply only. |
| 19 | Providing and fixing factory made uPVC white colour casement (Openable) Door frame with single/double shutter made of extruded profile with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with metal chamber, Frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be metered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. Notes: (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (ii) Glass shall be measured in respective item of BoQ as supply only. |
| 20 | Supply only 5 mm thick tinted glass, ordinary quality and glazing not exc 0.50 Sqm each pane for fixing in UPVC doors complete all as specified and as directed. |
| 21 | Supply only 6 mm thick toughened tinted glass, exc 0.50 Sqm each pane for fixing in UPVC doors complete all as specified and as directed. |
| 22 | Supply and fix powder coated aluminium coated deco grill of approved colour, design & pattern, with approved standard section fixed to frame with and including frame aluminium frame work hollow, 'H'/ 'F' channels by stainless steel screws complete all as specified and as directed. |
| 23 | Roughening surfaces of old concrete floor/ mosaic floor by chipping, picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed. |
| 24 | Material and labour for PCC type B-1, 1:2:4, using 20 mm graded stone aggregate as in floors, coping, levelling course, for filling hold fast etc. including necessary formwork complete all as specified and as directed. |
| 25 | Material and labour for Vitrified double charged coloured premium tiles 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, and shall be jointed in neat cement slurry and pointed in paste pigment to tile shade etc. over and including 15 mm thick screed bedding layers in cement mortar 1:6 for laying floor finishes tiles etc. complete all as specified and as directed. |
| 26 | All as per item No 25 above but as in skirting/dado including necessary cutting etc over and including 10 mm thick plaster in cement mortar 1:4 on brick or concrete surfaces, for receiving wall tiles complete all as specified and as directed. |
| 27 | Dismantling floor, hearth or skirting/ wall tiling including cement mortar bedding screed and plaster (but not backing), and rubbish off the premises or filling the old ducts, complete all as specified and as directed. |
| 28 | Material and Labour for 12 to15 mm thick Vitrified step tiles size exc 0.09 Sqm and not exc 0.25 of approved makes (Johnson Endura, Durato, Somany, or equivalent) in step treads, risers, skirting, landings, etc. jointed with grey cement slurry and pointed with white cement mixed with matching pigment to match the shade of the tiles, over and including a 15 mm thick screed bedding layer in cement mortar 1:6, complete all as specified and as directed. |
| 29 | Material and labour for machine cut polished Kota stone 16 to 18 mm thick over 10mm thick cement screed bed in cement mortar 1:4 as in skirting laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 30 | Material and labour for rounding to edges of stone slab one edge, such as in steps treads, cooking platforms, and similar situations etc. complete all as specified and as directed. |
| 31 | Demolition of Cement concrete (unreinforced) not exc 15 cm thickness (below or above ground floors) complete all as specified and as directed. |
| 32 | Demolition of brick/ concrete block masonry built in cement mortar complete all as specified and as directed. |
| 33 | Material and labour for precast cement concrete 1:3:6, type C0 (using12.50 mm graded stone aggregates) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 for closing door/window openings etc. complete all as specified and as directed. |
| 34 | Material and labour for precast cement concrete 1:3:6, type C0 (using12.50 mm graded stone aggregates) block masonry with solid blocks, not exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed. |
| 35 | Material and labour for 10 mm thick plastering in cement mortar 1:6, on internal walls, window jambs finished even and smooth w/o using extra cement etc.,complete all as specified and as directed. |
| 36 | Taking down cement plaster of any description on walls including raking out joints, hacking for key scrubbing down with water etc., complete all as specified and as directed. |
| 37 | Material and labour for rendering 15 mm thick in two coats (5 mm thick in cement mortar 1:4 with water proofing compound over 10 mm thick plaster in cement mortar 1:6) on fair faces of brick work or concrete blocks surfaces finished even and smooth without using extra cement, complete all as specified and as directed. (Note- water proofing compound shall be measured and paid separately). |
| 38 | Material and labour for 15 mm thick plastering in cement mortar 1:4, (in two layers 10mm + 5mm) on ceiling and chajja cement finished even and smooth w/o using extra cement etc.,complete all as specified and as directed. |
| 39 | Material and labour for 20 mm thick screed bedding layers in cement mortar 1:4 for laying topping layer of etc. complete all as specified and as directed. |
| 40 | Material and labour for Granite 18 mm thick work (Rounded at edges and polished) in floors, steps treads and risers in one piece, or door cills, platforms, urinal partition etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as approved by GE complete. |
| 41 | Supply and fixing Zebra blinds made of 100% polyester anti-wrinkle, dust-proof fabric weighing not less than 250 gsm (Green guard and RoHS certified), operated with smooth rolling mechanism comprising aluminum alloy top/bottom rail weighing not less than 3.6 kg / 15 ft (4.57 m) length, fitted with durable plastic gear set having internal steel coil spring, continuous loop polyester control chain with 46\\" (117 cm) drop, and heavy-duty powder coated iron alloy mounting brackets including all standard accessories, fixings, and fastenings complete all as specified and as directed. Note: Payment shall be made on the net clear area of the window opening measured. Makes: Hunter Douglas/ Luxaflex/ Vista Window Coverings/ Mac Blinds/ Marvel Window Coverings/ Tuiss/ HR Johnson |
| 42 | Complete removal of existing treatment by scrapping with steel scrapers, washing, rubbing down complete all as specified and as directed. |
| 43 | Material and labour for 1.50 mm thick (in two layers 1mm+0.5mm) cement-based wall care putty on walls etc. complete all as specified and as directed. |
| 44 | Material and labour for application of two coats of distemper Acrylic emulsion on wall surfaces over a coat of interior primer complete all as specified and as directed. |
| 45 | Material and labour for two coats of of distemper acrylic emulsion over ceiling surfaces over a coat of interior primer etc. complete all as specified and as directed. |
| 46 | Material and labour for applying two or more coats of Weather coat premium exterior acrylic anti-fungal emulsion paint having VOC less than 50 g/litre, UV resistance, alkali, fungal, and dirt resistance, of required shade, over and including a priming coat of exterior primer, including filling cracks with crack seal and filling depressions with exterior wall putty, over new and old prepared surfaces complete, all as specified and as directed. |
| 47 | Material and labour for spreading a cushioning / bedding layer of stone aggregate 6 to 10 mm size, spread to an average thickness, compacted and levelled to receive interlocking paver blocks, complete all as specified and as directed. |
| 48 | Material and labour for 60mm thick factory-made cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, hard standings, drive ways or parking areas etc, finishing and sweeping extra sand, complete all as specified and as directed. |
| 49 | Providing and applying a decorative textured paint finish of approved brand and manufacturer (e.g., Asian Paints, Berger, etc.) on wall surfaces to achieve the desired pattern. The work shall include Cleaning the surface thoroughly to remove dust, loose particles, grease, and fungal growth. Filling cracks, holes, or dents with suitable wall putty and sanding the surface to a smooth, even level before application.Priming: Applying one coat of approved interior-grade primer compatible with the selected texture system.Texture Application: Applying the texture material using appropriate tools (trowel, roller, or spray gun) as per the manufacturer’s technical specifications to create the approved design/pattern.Top Coats: Applying two or more coats of top-coat emulsion/finish in the approved shade and sheen (matte, metallic, or glossy) to provide a uniform, durable, and washable finish Please Enable Macros to View BoQ information |
| 50 | Providing and applying a decorative textured paint finish of approved brand and manufacturer (e.g., Asian Paints, Berger, etc.) on wall surfaces to achieve the desired pattern. The work shall include Cleaning the surface thoroughly to remove dust, loose particles, grease, and fungal growth. Filling cracks, holes, or dents with suitable wall putty and sanding the surface to a smooth, even level before application.Priming: Applying one coat of approved interior-grade primer compatible with the selected texture system.Texture Application: Applying the texture material using appropriate tools (trowel, roller, or spray gun) as per the manufacturer’s technical specifications to create the approved design/pattern.Top Coats: Applying two or more coats of top-coat emulsion/finish in the approved shade and sheen (matte, metallic, or glossy) to provide a uniform, durable, and washable finish Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender