Tender For Addition/ Alteration And Shifting Of Flag Mast At Parade Ground Cgdhq-4, Hardstanding At Cgra, Alteration Of Conference Room At Admin Building And Provision Of Shed For Guard Duty At Cgtc At Kochi. 8357/E8
Tender Value
44.50 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
19 days left
EMD
89000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration And Shifting Of Flag Mast At Parade Ground Cgdhq-4, Hardstanding At Cgra, Alteration Of Conference Room At Admin Building And Provision Of Shed For Guard Duty At Cgtc At Kochi. 8357/E8
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, complete all as specified. |
| 2 | Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 4 | Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 5 | Dismantling the existing steel flag mast 18 m high comprising MS mast post (300 mm dia at bottom and 100 mm dia at top, base plate, pulley arrangement, flag ropes and allied fittings, including excavation around the existing pedestal/ foundation for exposing anchor bolts, removal of existing anchor bolts by loosening nuts, gas cutting and chipping of concrete wherever required, lowering the mast carefully using suitable capacity crane without causing damage to the mast and accessories,loading,transporting to the new location for a lead up to 50 m, unloading, hoisting and erecting the mast over the new foundation/pedestal provided separately, aligning the mast to true vertical, fixing with anchor bolts, tightening nuts and washers, providing non-shrink grout below the base plate, carrying out required welding, grinding and touch-up painting to damaged portions, re-fixing pulley arrangement, flag ropes and accessories, removing and disposing debris and unserviceable materials out of MD land and commissioning complete as directed.NOTE: The rate excludes following items and will be measured separately: (a) New RCC footing and pedestal(b) New anchor bolts and base plate(c) Complete repainting of flag mast(d) New platform, steps and granite finishing |
| 6 | Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m in depth for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc n.exc 10 sqm on plan and n.exc 1.50 m in depth and getting out soft/ loose soil complete all as specified and as directed. |
| 7 | All as per item No 6 here-in-before but for depth exc 1.50 m but n exc 3.00 m |
| 8 | M&L for soling 200 mm spread thickness with broken, boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber, all as specified and directed. |
| 9 | Plain Cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete all as specified. |
| 10 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/ loose soil complete all as specified and as directed. |
| 11 | Removing surplus excavated soil to a distance exc. 500 m but n exc. 1500 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 12 | M&L RCC M-30 (Design Mix) as in foundations,including rafts, footings, foundation beams, plith beams, bases for columns etc complete all as specified and directed. |
| 13 | M & L RCC M-30 (Design Mix) as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 14 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces complete all as specified and directed. |
| 15 | Use and waste for form work to sides of pillars, posts ,struts ,piers,columns and stanchions , complete all as specified and as directed. |
| 16 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips complete all as specified and as directed. |
| 17 | All as per item No 16 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders. |
| 18 | M&L for providing precast cement concrete type C1, 1:3:6 (20 mm graded stone aggregate) solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed. |
| 19 | M&L rendering 10 mm thick in Cement Mortar 1:6 on fair faces of brick walls or on concrete surfaces, complete all as specified and directed. |
| 20 | M&L cement concrete 1:3:6 type C-2 nominal mix (using 40mm graded crushed stone aggregate) as in embedding of angle iron post complete all as specified. |
| 21 | M&L for broken stone or boulders of hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified. |
| 22 | M&L for Moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 23 | M&L for 100 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in sub base finished rough. |
| 24 | M&L Granite 18 mm thick of any type work (table rubbed and polished) in steps, treads jambs, pillars, window- cills, cooking platforms, other plateforms and like in over and including 10 mm thick backing coat in CM 1:4 complete all as specified. including pointing in white cement or colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite (including moulding etc). |
| 25 | S&F of plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410-W Gde E-250 . |
| 26 | Mild steel screw bolts purpose made with hexagonal or square heads at one end and screwed the other,each screwed end to be fitted with washers and one hexagonal or square nut exc 30 cm long (diameter of neck exc 20 mm n.exc 25 mm) |
| 27 | M&L for applying heavy-duty marine protective coating system to the existing steel surfaces including complete removal of exisiting paint, preparation of surfaces and applying one coat zinc-rich epoxy primer of minimum 75 microns DFT, one coat high-build epoxy MIO intermediate coat of minimum 150 microns DFT and one coat aliphatic polyurethane finish coat of approved shade (white) of minimum 50 microns DFT, including treatment of welds, edges, bolt heads, base plate, stiffeners etc complete all as specified and directed . |
| 28 | M&L applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces of any description over 10 cm wide or girth including preparation of surface etc, complete all as specified and directed. |
| 29 | Providing and fixing 6 mm dia stainless steel wire rope of 7 x 19 construction with stainless steel central core, grade AISI 316, having minimum breaking load of 2,350 Kilogram, including necessary end terminations, clamps, thimbles, shackles, tensioning devices, anchorage and fixing accessories for flag hoisting arrangement, complete all as specified and directed. |
| 30 | Providing and fixing LM 6 grade aluminium alloy pulley/sheave arrangement suitable for 6 mm dia stainless steel wire rope, complete with bush bearings, stainless steel shaft, mounting brackets and necessary fasteners, ensuring smooth operation of flag hoisting arrangement, complete as specified and directed. |
| 31 | Providing, fabricating and fixing stainless steel grade 304 tubular posts of 50 mm outside diameter and 2 mm wall thickness, with 1.00 m height above finished platform level, including stainless steel base flange, welded joints, decorative stainless steel ball finials, anchor bolts and necessary fixing arrangements on finished platform by drilling and grouting, including making good the fixing locations, complete as specified and directed |
| 32 | Providing and fixing stainless steel grade 304 decorative link chain of 6 mm nominal link diameter/thickness, heavy-duty type, for connecting peripheral stainless steel barricading posts, including necessary stainless steel hooks, rings, connectors and end-fixing arrangements, maintaining uniform sag and alignment, complete as specified and directed. |
| 33 | M & L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed |
| 34 | M & L Hangers 6 mm dia. G.I. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm diameter 40 mm long complete all as specified |
| 35 | M & L for 8 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) |
| 36 | M & L for 2 nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 37 | M & L for 25 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work |
| 38 | M & L for 18 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work |
| 39 | S & F Continuous (piano) hinges, width of hasp when open 40 mm, brass, bright finish or electrogalvanised |
| 40 | S & F 125 mm long Brass handles, cast type, polished bright |
| 41 | S & F Mortice latch with two levers (vertical type), mild steel body and fixed. Length of latch is 100 mm complete all as specified and directed. |
| 42 | M & L for 65 mm size brass mortice lock with 4 levers, vertical type complete all as specified and directed. |
| 43 | M&L for Solid PVC Wall Lining consisting of 5 mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as specified and directed. |
| 44 | M & L 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame as specified and directed |
| 45 | Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed. |
| 46 | Taking down chowkats but with shutters (without taking off shutters from frames) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed. |
| 47 | M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 48 | M & L for preparation of new plastered surfaces and applying two coat of oil bond distemper over a coat of primer and 2 mm thick wall care putty complete all as specified. |
| 49 | M & L Complete removal of old treatment and preparation of surfaces and applying two coat of oil bond distemper over a coat of primer and 2 mm thick wall care putty complete all as specified and directed. |
| 50 | M&L for vetrified double charged coloured tiles 9-10 mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 51 | M & L for 75 mm thick Cement concrete type B- 2, 1:2:4 (40 mm graded aggregate) |
| 52 | M & L for Screed bed or bedding layer in CM 1:6 of mortar 20 mm thick for laying floor finishes |
| 53 | M & L for 12 mm thick 400 x 400 mm heavy duty parking vetrified tiles in floor etc set jointed in neat cement slurry ad pointed in white or coloured cement to match the shade. |
| 54 | S & F structural steel work in tubular trusses and tubular posts inlcuding purlins, rafters, special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade st 240 and painting with one coat of zinc chromate primer paint including preparation of surfaces complete all as specified and directed |
| 55 | M& L for 0.50 mm thickness pre-painted galvalume aluminum zinc coating GI based corrugeted steel sheet (Manglore pattern) having tensile sterength of 550 Mpa as an roof covering /cladding to wall fixed with self tapping screws as specified complete all as specified and directed. |
| 56 | M& L for 0.50 mm total coated thickness pre-painted galvalume aluminum zinc coating GI based plain steel sheet having tensile sterength of 550 Mpa as in valley gutter, ridge of roof covering/ cladding to wall fixed and facia of roof etc. with self tapping screws as specified complete all as specified and directed. |
| 57 | S & F PVC (SWR) half pipes trapizodial shape 150 mm at top and 110 mm at bottom single socketed, in length with rubber ring joints, fixed as gutter complete all as specified and directed. |
| 58 | S & F PVC (SWR) single socketed 110 mm dia, single socketed any length with rubber ring joints fixed to wall as specified and directed. |
| 59 | S & F Mild steel bands, straps, supports or stayes for rainwater including bolts if required and similar small articles conforming to Fe-290 Gde-E-165 all as specified and as directed. |
| 60 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed. |
| 61 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed. Please Enable Macros to View BoQ information |
| 62 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender