Tender For Construction Of Tile Work Near Peer Baba Ground And Balance Work Of Raja Mandlik Community Hall At Chak Jandran Pyt Jabowal Block : Arnia Year :- 2026-27 Scheme Untied Plan
Tender Value
2.82 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
11 days left
EMD
5640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Tile Work Near Peer Baba Ground And Balance Work Of Raja Mandlik Community Hall At Chak Jandran Pyt Jabowal Block : Arnia Year :- 2026-27 Scheme Untied Plan
BOQ
| Sl. No. | Item Description |
| 1 | General site clearance including levelling of ground and disposal of material. 2 labour for 1 days |
| 2 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as per direction of Engineer-in-Charge. |
| 3 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 4 | CEMENT PLASTER (IN FINE SAND)15mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 5 | Providing and laying in position cement concrete 1 cement:5 fine sand:10 graded crushed stone aggregates 40mm size excluding the cost of centring and shuttering- all works upto plinth level. |
| 6 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 7 | Distempering with dry distemper of approved brand and manufacture (twoor more coats) and of required shade on new work, over and includingwater thinnable priming coat to give an even shade. |
| 8 | Providing/Fixing 300mm sweep exhaust fan including mounting , fitting including electrical installation for havells , orient are equivelant make (including hire charges of electrician , helper , contractor profit, all forms taxes |
| 9 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 andIS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) (A)For fixed portionAnodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) Powder coated aluminum (minimum thickness of powdercoated 50 microns) |
| 10 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing offittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) |
| 11 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm) |
| 12 | Sand for (30km) |
| 13 | Add cost of sign board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender