Tender For Upgradation, Repair, And Maintenance Of Sub-Division Shed At Ram Munshi Bagh Guest House.
Tender Value
3.45 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
4 days left
EMD
7000
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation, Repair, And Maintenance Of Sub-Division Shed At Ram Munshi Bagh Guest House.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead,G.S. Sheet |
| 2 | Dismantling steel work in single sections including dismembering and stacking within 50 meters lead in : Channels, angles, tees and flats |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Dumping stone excluding cost of stones in Horizontal on level |
| 5 | Supply of stones |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 11 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood |
| 12 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineering-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second class kail wood (30 mm) for doors |
| 13 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Second Class kail wood for doors |
| 14 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class Kail wood (30 mm) |
| 15 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 16 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 17 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 18 | Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 20 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 25mm OD(SDR-7.4) |
| 21 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 22 | Providing and fixing PPR UnionsPPR Union 25mm |
| 23 | PPR Union 32mm |
| 24 | Providing And Fixing Gate Valve Of Approved Quality32 mm |
| 25 | 25 mm |
| 26 | Sockets 25mm |
| 27 | Female Socket 25mm /15mm |
| 28 | Male Socket |
| 29 | Elbow 25mm |
| 30 | 32 mm |
| 31 | 75 mm |
| 32 | 100 mm |
| 33 | Female Elbow |
| 34 | Tee 32mm |
| 35 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 36 | Connecting Pipes (0.60 m Length) |
| 37 | Providing And Fixing Of 75 Mm Dia Pvc Pipe Incl. Fittings Like Collars Etc B type |
| 38 | Providing And Fixing Of 100 Mm Dia Pvc Pipe Incl. Fittings Like Collars Etc B type |
| 39 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 40 | Providing and Fixing of Mixer of Approved Quality. |
| 41 | Aldrops including Locking Arrangements |
| 42 | P/F Of P.V.C Plain Bend Prince Of Make B ,75 Mm Dia |
| 43 | P/F Of Door Bend Of Make B, 100 Mm Dia |
| 44 | P/F Of Door Tee Make B, 75mm Dia |
| 45 | P/F Of Door Tee Make B, 100mm Dia |
| 46 | P/F Of P.V.C Floor Trap Of Grade B 75 Mm Dia |
| 47 | MultiTrap |
| 48 | Tank Connector (25mm Inlet) |
| 49 | Tank Connector (32 mm outlet ) |
| 50 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460mm bowl depth 200mm |
| 51 | Sink Waste Pipe(50mm) |
| 52 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 53 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore |
| 54 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab over 0.5 sqm) 16 mm thick. |
| 55 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work. |
| 56 | Providing and installing Lighting point inclduing wiring in 1.5 sqmm PvC insulated copper wire and 2.5 sqmm PVC insulated multistrand copper wire for lighting submains, 6 Amp one way switch, 2mm thick pvc conduit with bends, Junction boxex Etc , 6 AMP s pole MCB , 2 Way DB For Housing MCB and Modular Switch Box Recessed In walls with accesories |
| 57 | Providing and installing Heating Point inclduing wiring in 4 sqmm PvC insulated copper wire and 6 sqmm PVC insulated multistrand copper wire for Heating submains, 16 Amp switch Socket Combined 2mm thick pvc conduit with bends, Junction boxes Etc , 32 AMP s pole MCB , 2 Way DB For Housing MCB and Modular Switch Box Recessed In walls with accesories |
| 58 | Providing and fixing of Fan Point including wiring for Lighting points in 1.5 Sqmm PVC insulated Multi Strand Copper Wire , 1200 mm Ceiling Fan/225 mm Exhaust Fan with ceiling Roses , And PVC Square Block,350 watt electornic Fan Dimmer,6 Amp S Pole MCB , 2 Way DB for Housing MCB for lighting Circuits and Modular Swith Boxes Recessed in walls with Accesories |
| 59 | Suppy and fixing of 1.5 HP Electric Water Motor of standard quality with all fixtures and G.I Fitting Etc and Concealing in wooden Box Complete JOB |
| 60 | Suppy and fixing of 25 Ltrs Water Gyser of approved Quality |
| 61 | Carriage of Steel(Unservicible Material) from site to divisional store. |
| 62 | Providing and fixing wardrobe/ cabinets made of 18mm pre laminated (HDHMR) high density high moisture resistance board including back surface & including cost of fixing of hinges, handles, Tower bolts of required sizes, nails, screws, catchers, beadings, Stainless steel channels and locks where ever required, completed job. Cost of fevicol and other adhesive material included (Size of cabinet varying with depth from 45 cm to 60 Cm).Measurements to be done on front face only. |
| 63 | Providing and fixing of Superior 3D Wall paper, waterproof including all chemicals required for fixing complete job. |
| 64 | Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 65 | Providing and fixing of Stainless steel handles of approved made and make including all fixtures and necessary screws complete job(100 mm). |
| 66 | Providing and fixing of stainless steel cabinet Locks of approved make and made complete job. |
| 67 | Supply and Fixing of 15 Watt LED Lights(Concealed/Hanging type 100/150 either Screwed head/Cliff,1mm Wire 07 mtrs type of Approved Quality and make with one year company Warrenty including all Carriages complete Job. |
| 68 | Supply, installation, testing and Commissioning of fans Hanging/ Standing type of approved make and made including one year Company Warrenty. |
| 69 | Providing and fixing aluminium tower bolts lSI markedanodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.(100 x 50) |
| 70 | Providing and Fixing of Ply wood 12mm Thick |
| 71 | Providing and Fixing of Ply wood 6mm Thick |
| 72 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 73 | Engagement/Hire Charges of Carpenter (2nd Class) |
| 74 | Engagement/Hire Charges of Mason (2nd Class) |
| 75 | Engagement of Blacksmith (1st class) |
| 76 | Engagement of Labourer |
| 77 | Providing and Fixing of Standard Glass wool for Insulation Purposes complete Job. |
| 78 | Carriage of material by mechanical transport including loading unloading and stacking from source to road site of work. Stone soling/boulders avg lead 15 km |
| 79 | 40mm aggregate avg. 15 km. |
| 80 | 20mm aggregate avg. 15 km. |
| 81 | Sand avg. 15 km. |
| 82 | Cement Avg. lead 02km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender