Water Resources and Irrigation Government Departments Closing in 3 days TDR #58526074

Tender For Renovation Of Washrooms, Windows Etc To Divisional Office Building At Irrigation Colony Sumbal.

Issued by Government Departments · Ganderbal, Jammu and Kashmir
Tender Value
2.38 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
3 days left
EMD
4800
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ganderbal → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation Of Washrooms, Windows Etc To Divisional Office Building At Irrigation Colony Sumbal.

BOQ

Name of Work:- Renovation of washrooms, windows etc to Divisional Office Building at Irrigation colony Sumbal.
Sl. No. Item Description
1Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil
2Providing and laying in position stone soling using Nallah stone complete job.
3Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
4Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing inCement mortar 1:6 ( 1 cement : 6 coarse sand)
512mm Cement plaster of mix: 1 : 6 (1 cement : 6 fine sand)
6Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.
7Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
8Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (TMT bars)
9Dry random rubble masonry with hard stone in foundation and plinth: With bond stone. (Quarry)
10Providing and fixing Wire Gauged window shutter of KD Wood with wire guage and butt hinges and other accessories (hardware fittings) of required size, all complete as per direction of Engineer-in-charge.
11Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With 12 mm mild steel U beading
12Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm
13Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity – coloured
14Providing and fixing 15 mm nominal bore CP brass Bib cock of approved quality confirming to IS: 8931 .
15Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)
16Providing labour for dismantling and removing the remaining portions of broken/damaged doors and windows, including associated fittings, etc (Serviceable materials shall be neatly stacked as directed and unserviceable materials disposed off), and making good any disturbed portions of the structure and cleaning of the place before commencement and after completion of the work, including removal of debris, dust and waste materials and disposal as directed.1. Unskilled Labour
172. Skilled Labour (Carpenter, Electrician and Plumber 2nd Class)
18Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)
19Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm)
20Providing and fixing of Geyser of standard quality of 50 Ltr. Capacity (Racold) along with all fixtures and fittings, complete job at Flood Control Sub-Divisionh Hajin
21Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished and all other allied accessories, of required size with necessary screws (35 mm)
22Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
23Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. (One or more coats on old work)
24Providing and fixing 16A heating points complete with wiring (2.5 sq.mm FR copper cable) in PVC conduit/channel, DP switch with indicator, socket outlet, earthing, testing and commissioning, complete in all respects
25Providing and Fixing of PVC Waste Pipe/ Vent Pipe (Type B), including trenching, fitting, fastenings, fixtures (like elbows, tees, bends, etc), joints, etc Complete Job , as per the directions of Engineer in charge75 mm
26Providing and Fixing of PVC Soil Pipe (Type B), including trenching, fitting, fastenings, fixtures (like elbows, tees, bends, etc), joints, etc Complete Job , as per the directions of Engineer in charge100 mm
27Providing and fixing of F-Trap along with Stainless Steel Drain Strainer, Complete Job
28Providing and fixing of R-O (UV) Kent Water Purifier (8.0 Ltr) of standard quality and make, along with installation of all accessories and fixtures/fastenings, including input water supply from source complete job
29Providing of 6 tier metal storage rack of size 6.5x3.0 foot with 22 gauge along with all accessories and all sorts of carriage to Divisional Office.
30Carriage of materials from source upto site of work by mechanical transport including loading , unloading and stacking etc.
31Stones for an avg lead of 34 KMs
3240 mm Aggregate for an average lead of 6 KMs
3320 mm Aggregate for an average lead of 6 KMs
34Sand for an average lead of 5 KMs Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58526074
AUTHORITY Government Departments
TENDER VALUE 2.38 Lakhs
LAST DATE 20-11-2026
Authority
Authority Name Irrigation And Flood Control Department
Work Description Tender for Renovation Of Washrooms, Windows Etc To Divisional Office Building At Irrigation Colony Sumbal.
Basic Detail
Tender No ENIT10OF2026-27
Bidding Type Tender
Location
City Ganderbal
State Jammu and Kashmir
Key Dates
Publish Date 13 Nov 2026
Submission Date 20 Nov 2026
Open Date 21 Nov 2026
Finance
Tender Value 2.38 Lakhs
Tender Fee 200
EMD 4800
Exemption Not Available
Document List
07ab5ec6-e1c3-41d1-b3c6-7e543194b311.html
BOQ_1123862.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 20, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 21, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

07ab5ec6-e1c3-41d1-b3c6-7e543194b311.html

xls

BOQ_1123862.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender