Tender For Improvement Of Water Supply Scheme In Thevur Town Panchayat
Tender Value
3.35 Crore
Estimated cost
Bid Submission
30 Nov 2026
13 days left
EMD
3.35 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Water Supply Scheme In Thevur Town Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork execavation in all types of strata for laying pipeline in respect of following size of pipe with standard trench width and required depth including shoring strutting, bailing out water wherever necessary and all other incidential works such as barricading, providing danger lights labour for watch and ward and directed by TWAD Board Officers. 300mm DI pipe K7 pipe |
| 2 | Supply and delivery of Ductile Iron socket/spigot pipes for class K7 as per IS8329/2000.The cost of pipes should include loading, freight, transit insurance, incidental charges, packing, taxes and unloading, stacking at site in good condition etc., complete as directed by the TWAD Board officers. 300mm DI pipe K7 pipe |
| 3 | Lowering of C.I/ D.I Pipes and specials in the trenches and laying to proper grade and alignment and as directed by the TWAD Officers. 300mm DI pipe K7 pipe |
| 4 | Jointing C.I/ D.I-S/S pipes and specials with rubber gaskets (tyton joint) including cost of lubricants. (including cost of jointing materials) 300mm DI pipe K7 pipe |
| 5 | Testing of MS / CI / DI / PVC HDPE pipes with hydraulic testing equipment by filling with water (including cost of water Rs.60/KL) and testing to recommended pressure in convenient stretches and attending the burst if any occurred during the test, excluding the cost of pipes but including other incidental and operation charges etc 300mm DI pipe K7 pipe |
| 6 | Refilling the trenches with excavated earth (other than sand) in respect of following sizes of pipes in layers of 15 Cm thick well rammed, watering consolidated and complying with standard specifications for filling the trenches after the pipes and specials are laid jointed and tested removing and spreading the surplus earth at the places shown by the TWAD Board officers 300mm DI pipe K7 pipe |
| 7 | Manufacture, Supply and Delivery of Tamper proof of following sizes of DI single chamber air release valves with pressure range from PN 1.0 to 2.5 with body and cover made of Ductile Iron of Grade GGG 40 or equivalent grade conforming to IS 1865 with Food Grade Epoxy Powder coating(EP-P) inside and for outside of colour blue RAL 5005. All internal parts such as float, shell etc., cover bolts, made of Austenitic alloy steel of SS AISI 304/316. The float made of Polytetrafluroethylene/ Austenitic alloy steel of AISI 304/316. Gaskets and seals of EPDM / Neoprene rubber for TWAD Board works. 50mm dia Air valve for 300mm Main |
| 8 | 200mm dia Air valve for motor line |
| 9 | Supply and Delivery of DI D/F Gate Valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade GGG 40 or equivalent grade, wedge fully rubber lined with EPDM, replaceable spindle nut, without gland packing and with 3 O-Ring protection on the shaft and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimentions as EPR BS 5163-89/ ISI 14846-2000/ DIN 3202 F 4. All the valves should be with electrostatic powder coating both inside and outside with pocket less straight thro’ body passage. All lthe valves are to be compatible for burried application with pressure rating PN 10/16 300mm dia Sluice valve for 300mm Main |
| 10 | Supply and Delivery of DI D/F Gate Valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade GGG 40 or equivalent grade, wedge fully rubber lined with EPDM, replaceable spindle nut, without gland packing and with 3 O-Ring protection on the shaft and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimentions as EPR BS 5163-89/ ISI 14846-2000/ DIN 3202 F 4. All the valves should be with electrostatic powder coating both inside and outside with pocket less straight thro’ body passage. All lthe valves are to be compatible for burried application with pressure rating PN 10/16 200mm dia sover valve for 300mm Main |
| 11 | Manufacture, Supply and Delivery of DI D/F Slanted seat Swing Check Valve. Body of ductile cast iron GGG 40 or equivalent grade and disc of ductile cast iron GGG 40 or equivalent grade with fully encapsulated EPDM rubber, where both faces can be used. Electrostatic epoxy powder/liquid coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W270. (EP-P) it is a resi-coat powder approved for drinking water application, applied through fusion bonding process by dipping the shot-blasted casted components heated up to 200degC). Face to face dimensions as per EN558-1, series 48 and flange connections as per EN 1092-2/IS 1538. 300mm dia Return Valve for 300mm Main |
| 12 | 200mm dia Return Valve for motor |
| 13 | Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I, II,III class B and also IS 779 and IS 2373 with life cycle test certificate from FCRI/NABL accredited lab. The water meters shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position . The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointers of the meter shall be as per ISO 4064 class B specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates. 300mm Water meter |
| 14 | 300mm Water meter DirtbBox |
| 15 | 300mm Water meter Erection charges |
| 16 | Construction of Air valve pit for the following sizes of air valves as per type design and as per relevant specification and as directed by the TWAD Board officers. 50mm dia Air valve pit for 300mm Main |
| 17 | 300mm dia Sluice valve pit for 300mm Main |
| 18 | 200mm dia Scover valve pit for 300mm Main |
| 19 | 300mm dia Non Return Valve pit for 300mm Main |
| 20 | 200mm dia Non Return Valve pit for 300mm Main |
| 21 | 300mm WATER METER pit for 300mm Main |
| 22 | 200mm dia Air valve pit for 300mm Main |
| 23 | Supply and delivery of Ductile Iron socket/spigot for Pipe Sepsalsclass K7 as per IS8329/2000. 300 x 300 x50 mm All socket Tee |
| 24 | 300 x 300 x50 mm All socket Cover |
| 25 | 300 x 300 x50 mm All socket Equal tee |
| 26 | 300 mm DI 7K cut Pipes |
| 27 | 200 x 300 x50 mm Tapper |
| 28 | 200 mm tail piece - 0.50 m length Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender