Educational and Research Institute Local Bodies Closing in 13 days TDR #58525608

Tender For Rewiring And Renewal Of Powermains, Fans & Fittings In Workshop Foundary Lab Of Mechanical Department In Alagappa Government Polytechnic College At Karaikudi.

Issued by Local Bodies · Sivaganga, Tamil Nadu
Tender Value
1.48 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
13 days left
EMD
1500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sivaganga → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Rewiring And Renewal Of Powermains, Fans & Fittings In Workshop Foundary Lab Of Mechanical Department In Alagappa Government Polytechnic College At Karaikudi.

BOQ

Name of Work:- Rewiring and renewal of powermains, fans & fittings in Workshop Foundary Lab of Mechanical Department in Alagappa Government Polytechnic College at Karaikudi.
Sl. No. Item Description
1Renewal by Wiring with 2x1.5 sq.mm. PVC insulated SCunsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil)
2Renewal by supply and fixing of 1200mm (48\\") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod on the existing fan clamp.
3Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket).
4Renewal by Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch on suitable TW Box.
5Renewal by Supply and fixing of 32A TPN Metal Clad Switch (Side Handle) with Re-wirable Fuse units on wall and making good of the concealed portion with necessary earth connection . (The MCB and metal enclosure should be of Higher End).
6Renewal by Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour.
7Supply, fabrication, erection and commissioning of 200A capacity dust and vermin proof cubical panel board size of 5' x 1' x 4' made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interior switch with bus bar chamber complete with 1\\" x 1/4\\" tinned cu. Flat for 3 phases, neutral & earth with bus bar insulators. The following tinned Cu flat should be used for interconnection between busbar and switches: 1\\" x 1/4\\" tinned cu. Flat for interconnection of 1No of 200A incoming Switch, 1\\" x 1/8\\" tinned cu. Flat for interconnection of 2Nos 125A outgoing switches to bus bar and no.8 SWG copper conductor for interconnection of 6Nos 63A outgoing Switches to bus bar.A separate chamber on top of one side should be provided with multi function meter with 0.5 CL to display Line & Phase Voltage, Phase Current, Power Factor and Frequency with one set of LED pilot lamp, fuse holder with suitable HRC fuse for each phase with suitable CT coil arrangements. The panel should be fabricated as per the latest CEA regulations for accommodation of 9Nos 3 phase switches and supply & fixing of the following switches.1. 200A TPN switch disconnector fuse units interior only with HRC fuses double break-1No 2. 100A TPN switch disconnector fuse units interior only with HRC fuses double break-2Nos 3. 63A TPN switch disconnector fuse units interior only with HRC fuses double break-6Nos In each cubical switch, live portion of bus bar should be shrouded by 6mm thick hylum sheet separators, and properly earthed by tinned solid copper flat as per the latest CEA regulations. The earth bus with two runs of 1 1/4\\" x 1/4\\" tinned copper flat must be run all round the panel to provide double earth connection. The panel should be painted with two high quality enamel paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and metallic danger board affixed complete with mounting on base channel 3\\"x1½\\"x½\\" iron frame work support complete. (The TPN switches should be L&T / Siemens make only)
8Renewal by Supply and Run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire with painting of suitable colour. (SD-54)
9GST Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58525608
AUTHORITY Local Bodies
TENDER VALUE 1.48 Lakhs
LAST DATE 30-11-2026
Authority
Authority Name Department Of Higher Education
Work Description Tender for Rewiring And Renewal Of Powermains, Fans & Fittings In Workshop Foundary Lab Of Mechanical Department In Alagappa Government Polytechnic College At Karaikudi.
Basic Detail
Tender No 4.4 2026 27 Dated 13.11.2026
Bidding Type Tender
Location
City Sivaganga
State Tamil Nadu
Key Dates
Publish Date 13 Nov 2026
Submission Date 30 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 1.48 Lakhs
Tender Fee Ref. Documents
EMD 1500
Exemption Not Available
Document List
065662b0-7346-4533-adeb-140eccb3a1c7.html
BOQ_871638.xls
TenderConditionworkshopfoundarylab.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

065662b0-7346-4533-adeb-140eccb3a1c7.html

xls

BOQ_871638.xls

pdf

TenderConditionworkshopfoundarylab.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender