Housing Urban and Rular Development Government Departments Closing in 0 days TDR #58523714

Tender For Works Under The Zfd Scheme On The Etah-Kasganj Road Odr For The Financial Year 2026-27 Industrial Area Gate Nos 1-2 Serial No 182 And From Sirsa Tippu To The Petrol Pump Serial No 193

Issued by Government Departments · Etah, Uttar Pradesh
Tender Value
48.50 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
0 days left
EMD
4.43 Lakhs
Bank guarantee accepted
Document Fee
2354
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Etah → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Works Under The Zfd Scheme On The Etah-Kasganj Road Odr For The Financial Year 2026-27 Industrial Area Gate Nos 1-2 Serial No 182 And From Sirsa Tippu To The Petrol Pump Serial No 193

BOQ

Name of Work:- foÙkh; okZ 2026&27 esa ,Vk dklxat ekxZ ¼våftåekå½ ij tsM0,Q0Mh0 ;kstukUrxZr dk;Z A ¼bUMLVªy ,fj;k xsV ua0&1&2 ¼Ø0la0&182½ ,oa fljlk fVIiw ls isVªksy iEi rd ¼Ø0la0&193½½
Sl. No. Item Description
1Excavation in Soil using Hydraulic Excavator and Tippers with Disposal upto 1000 metres. Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m. (3.01 301) Excluding GST
2Construction of Embankment with material obtained from borrowpits : Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. ( 3.2&305) Excluding GST
3Granular Sub-Base with Graded Material -Plant Mix Method (Table:- 400-1) Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 Excluding GST
4Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(4.14&406) Excluding GST
5Prime Coat over WMM/WBM-Providing and applying primer coat with SS2 grade Bitumen Emulsion SS-2 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.(5.1&502A) Excluding GST
6Tack Coat on Bituminous surfaces (Providing and applying tack coat with bitumen VG-10 using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.) (5.2&503) ( For Existing Surface) Excluding GST
7Dense Graded Bituminous Macadam Grading -IIProviding and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects. Excluding GST
8Bituminous Concrete Grading-II-Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. Morth 507-B Excluding GST
9Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. Excluding GST
10Retro reflectorised Traffic Sign as per IRC 67-2012 Providing and fixing of retro reflectorised cautionary mandatory and informatory sign as per IRC 67-2012 made of high instensity grade sheeting vide clause 801.3 friced over aluminium sheeting type- IV 1.5mm thick supported on a mild stell angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmx45cmx60cm, 60cm below ground level as per approved drawing. The retro reflective sheeting shall be tested shall be tested for 3 year outdoor weathering test in Indian condition as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. 60cm equiliteral tringle with diffinitation plate size (20cmX60cm) Excluding GST
11Retro reflectorised Traffic Sign as per IRC 67-2012 Providing and fixing of retro reflectorised cautionary mandatory and informatory sign as per IRC 67-2012 made of high instensity grade sheeting vide clause 801.3 friced over aluminium sheeting type- IV 1.5mm thick supported on a mild stell angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmx45cmx60cm, 60cm below ground level as per approved drawing. The retro reflective sheeting shall be tested shall be tested for 3 year outdoor weathering test in Indian condition as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. 30x90 cm Hazard Excluding GST
12Supply and Fixing of Linear Delineator System (LDS) Panels made of Micro Prismatic Retro Reflective Sheeting duly laminated of thin aluminium foil to a unique corrugated shape to provide Retro Reflection across wide range of observations and external angles. Eatch LDS panel should be of norminal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly on existing MS railing MS Sections welding as and when required. SOR CH-27 SI-2 Excluding GST
13Flexible Median Marker As Per IRC 79:2019: Flexible Median Marker (FMM) should be used for improving median visibility during dark hours.. Use of Median Marker provides safety against collision happening with medians during night time, or severe weather. Flexible Median Markers shall be provided with fluorescent yellow colour retro-reflective sheeting Type XI as per IRC:67. Flexible Median Marker shall be of tough, high impact resistant, injection-molded, thermoplastic body with property of flexibility to provide high durability 'and U shape structure having rebound/bounce back property. the sheeting shall be of Type XI conforming to IRC:67 and it should be on both the faces whereby providing maximum reflectivity at langer distances with adequate durability. The logo of the manufacturer shall be embossed on either side of the body during the injection molding process. FMM shall be fixed by a combination of epoxy adhesive and grouting/drilling on concrete medians or property constructed solid medians. Height: The marker height shall be a minimum of 180 mm. width 120 mm & Body Thickness: 6.5 mm. the shanks shall not be less than 20 mm and depth shall not be less than 30 mm Reflective Area: Shall not be less than 90 cm square. 0Proof of the same Report shall be uploaded which quoting tender. The body of FMM shall bounce back to its original position of after 750 number of hits using pendulum of 1.8 kg conforming 40 ASTM D256 adhesion between the body and outer casing body of FMM shall with stand 50 kg 1 Tensile loads conforming to ASTM D638 method. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge SOR Excluding GST
14Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. (Repeated/ Transverse bar)Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes. SOR Excluding GST
15Reflective Raised Pavement Markers (Cat Eye/Road Stud) Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (High-impact Polystyrene) or Acrylonitrite Butadiene Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4280. The Reflective panels shall consist of number of lenses containing single or dual prismatic cubes capable of providing total internal reflection of the light entering the lens face. Lenses shall be moulded of methyl methecrylate conforming to ASTM D788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+1-5 degree to base and the area of each retro -reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name , trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. In addition, a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. In case the markers are displaced, damaged get worn out or lose their reflectivity compared to stipulated standards, the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own cost. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. SOR CH-27 S No -5 Excluding GST
16Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with wooden Primer of approved brand and manufacture including cost of all material, Labour, T&P etc. complete required for proper completion of the work. SOR CH-15 SI 4 New 13.62.1 Excluding GST
17Type A, \\"W\\" Metal Beam Crash BarrierProviding and erecting a \\"W\\" metal beam crash Barrier comprising of 3mm thick Corrugated Sheet metal beam rail, 70 cm above road/ ground lavle fixing ISMC Series channel Vertical post, 150x75x5mm spaced 2m center to center, 1.80 m high, 1.1 below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to confirm to IS:1367 and IS:1364, Metal beam rail to be fixed in the vertical post with a spacer of channel section 150x75x5mm, 330mm long complet as per clause MoRTH - 810 Excluding GST
18Making speed table 7 mtr Wide bitumenous concrete with 5.4% VG-30 material (Tropizoidal Speed Table) on SH/MDR Road with B.C. in tropizoidal shape 100mm high complete in all respect As per morth & specification and as per direction of E/I. \ Excluding GST Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58523714
AUTHORITY Government Departments
TENDER VALUE 48.50 Lakhs
LAST DATE 21-11-2026
Authority
Authority Name Public Works Department
Work Description Tender For Works Under The Zfd Scheme On The Etah-Kasganj Road Odr For The Financial Year 2026-27 Industrial Area Gate Nos 1-2 Serial No 182 And From Sirsa Tippu To The Petrol Pump Serial No 193
Basic Detail
Tender No 5819/Cashier dt 15.10.2026
Bidding Type Tender
Location
City Etah
State Uttar Pradesh
Key Dates
Publish Date 13 Nov 2026
Submission Date 21 Nov 2026
Open Date 21 Nov 2026
Finance
Tender Value 48.50 Lakhs
Tender Fee 2354
EMD 4.43 Lakhs
Exemption Not Available
Document List
2458c754-bb22-4033-a374-73759c92a5b5.html
BOQ_2292517.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 21, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Today

Tender Documents

Download All (ZIP) ↓
html

2458c754-bb22-4033-a374-73759c92a5b5.html

xls

BOQ_2292517.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender