Tender For Construction Of Public Distribution Shop Building At Sukkampatti In Arasalur Panchayat.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Nov 2026
4 days left
EMD
17100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruchirappalli → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Public Distribution Shop Building At Sukkampatti In Arasalur Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork Excavation in Hard Soil - Earthwork excavating and depositing with in initial lead of 10m and lift of 2m (For roads, supply channels, desilting of SS20 B |
| 2 | Collection and supply of M.Sand and filling into the basement including cost and conveyance to the site and all labour charges for filling as per standard specification. |
| 3 | Cement mortar 1:4:8 mix using 40mm ISS metal (Using M-Sand) including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete for 10 cum |
| 4 | Brick work in cement mortar 1:5 mix (Using M-Sand) using country bricks 83/4x41/423/4 and conveyance of all materials to site and all labour charges etc complete |
| 5 | Cement concrete 1:3:6 mix using 20mm ISS metal (using M-Sand) including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 cum |
| 6 | Supplying and fabrication of steel including cost and conveyance of steel to site and all labour charges for straightening, cutting to length, bending to shape and tying in position and forming grills for all R.C.C works |
| 7 | Centering Below GL: Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) |
| 8 | Centering Above GL: Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) |
| 9 | Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal (using M-Sand) including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete for 10 cum |
| 10 | Supply and fixing of Steel rolling shutters including cost and conveyance to work site and labour charges etc complete-M0402 (8-12Sqm) |
| 11 | Solid PVC Door shutter using 19 gauge 19mm MS sq. tubes for styles and outer frames, 15mm MS sq. tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable suitable rebate for housing the shutter. |
| 12 | Supply of Steel Door of size 1.00 m x 2.10 m etc |
| 13 | Supply of Steel Window of size 1.00 m x 1.30 m etc |
| 14 | Floor finishing with ceramic tiles of size 20cmx20xm (Using M-Sand) including cost and conveyance of all materials to site and all labour charges etc complete |
| 15 | Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick |
| 16 | Providing granolithic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick (Using M-Sand) including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum |
| 17 | Cement concrete 1:2:4 mix using 20 mm ISS metal (using M-Sand) including cost and conveyance of all materials to site and labour charges for mixing, laying, and curing etc complete for 10 cum |
| 18 | Plastering with cement mortar 1:5 mix to 12mm thick (using M-Sand) including cost and conveyance of all materials to site and all labour charges etc |
| 19 | Plastering with cement mortar 1:4 mix to 20 mm thick (using M-Sand) including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm |
| 20 | Dadooing of walls with glazed tiles of size 15 cm x15cmx6mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 -10Sqm |
| 21 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. |
| 22 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and approved colour over a priming coat including through scrapping, clean removal of dirt and including necessary plaster of pairs putty, wherever required etc complete complying with standard specification |
| 23 | Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work). |
| 24 | Supplying and fixing P.V.C rainwater down fall pipe of 110m dia with necessary shoes, bends,& clamps etc., |
| 25 | Rain Water Harwasting including Rings, Cover Slab, Earth work , Filling Errection all charges. |
| 26 | Supplying and fixing in position of Indian Type water closet 580x440mm of approved qualtiy |
| 27 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia B class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 28 | PVC Storage tank including all charges etc complete |
| 29 | Supplying and fixing fine polished cuddapah slab of Cost of 20 / 30mm thick cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct. |
| 30 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\") copper flat) on TW plank of size 375mmx300mmx19mm with supporting TW reepers of 1\\" thick an either side with paining with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD 125) |
| 31 | Wiring with 2x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall an ceiling PVC accessories in flush with wall with 3mm thick hylum shet cover with TW switch box and 5 A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light / fan point (for electronic regulator) (5 points per coil) (SD 25) |
| 32 | Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed CU. conductor of 1100 v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x 100x113 mm TW switch box for 5 A3 pin non inter locking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14SWG TC wire for open PVC plug point (SD 36) |
| 33 | Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100V grade on 7/20 GI bearer wire for service connection mains (SD 64) |
| 34 | Supply and fixing of WT bulk head fittings with guard (Philips/ Bajaj/ Cromptn/ K.Lite) suitable incandescent lamp with 60 W bulb (SD 84) |
| 35 | Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals tot he fitting with tube(SD 89) |
| 36 | Supply and fixing of 1200 mm (48\\") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp (SD 110) |
| 37 | Supply and fixing of fancy glass shade and 11W CFL for BH point SD 80 |
| 38 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender