Tender For Addition/Alteration /Improvement To Md Accn At Af Stn Tughlakabad (Phase-Iii) Under Ge (Af) Tughlakabad
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
13 days left
EMD
87360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration /Improvement To Md Accn At Af Stn Tughlakabad (Phase-Iii) Under Ge (Af) Tughlakabad
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site all as specified and directed |
| 2 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed. |
| 3 | Taking down or up 15 mm bore galvanised iron tubing and connection and S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, cutting chases for concealed water tubing and making good,bore of pipe 15 mm complete all as specified. |
| 4 | All as per serial item 3 here in before but 20 mm bore. |
| 5 | M&L for non skid ceramic coloured tiles as in floors 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm (300 mmx300mm x 7mm thick) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6), dismantling floor and screeding etc complete all as specified and as directed. All dismantling/demolished material removed from MOD land completely.Rate of removal outside side from MoD land deemed to be included in the same item. |
| 6 | M&L for glazed ceramic colour tile in area size 450mmx300mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick rendering in cement mortar (1:4), dismantling floor and screeding etc complete all as specified. All dismantling/demolished material removed from MOD land completely.Rate of removal outside side from MoD land deemed to be included in the same item. |
| 7 | M & L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors over 15 mm thick screed bed in CM (1:6) etc set and jointing in neat cement slullry and pointed in white or coloured cement to match, including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed. All dismantling/demolished material removed from MOD land completely.Rate of removal outside side from MoD land deemed to be included in the same item. |
| 8 | Demolition of brick work or stone/boulder masonry, built in cement mortar incl. all quoins arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed. |
| 9 | M&L brick work in CM (1:6) with sub class ‘B’ bricks straight or curved on plane exc 6m mean readius,used in drain, boundary wall,compound wall complete all as specified and directed by engr in charge. |
| 10 | M&L for providing and fixing factory made Fiberglass Reinforced Plastic (F.R.P.) chajja of approved colour, size and design, 4 mm thick, manufactured by Resin Transfer Moulding (RTM) technology resulting in void-free compact laminate in single monolithic piece, having smooth gradual slope curvature for proper drainage of rain water and reinforced with 2 Nos. vertical and 1 No. horizontal M.S. flats of size 50 mm × 2 mm with inbuilt 12 mm dia holes for anchoring/grouting to existing wall, including 50 mm wide flanges duly inserted, grouted and sealed in wall, complete with all necessary fixtures, stainless steel dash fasteners, screws, sealing compound, labour, carriage and all leads and lifts, including staging/scaffolding and execution of work at any height and at all floor levels including third floor level and above, complete as directed by Engineer-in-Charge. The FRP chajja shall be manufactured using unsaturated polyester resin conforming to IS:6746 and reinforced with Fibre Glass Chopped Strand Mat (CSM) conforming to IS:11551 with protective gel coating and UV resistant coating on top to withstand extreme weather conditions, temperature variations and sunlight complete, including demolishing existing RCC chajja of any size and thickness, cutting reinforcement bars, dismantling carefully without damaging adjoining structure, removing debris/malba out of premises , and making good disturbed surfaces with cement mortar 1:4 (1 cement : 4 coarse sand) including finishing the surface to match with existing adjoining surface complete. |
| 11 | Demolition of concrete is reinforced (Reinforcement cut as required to faciliate demolition) of any descrition and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge. Debris should be properly disposed off MoD premises. |
| 12 | M & L for Reinforced cement concrete 1:1.5:3 using 20 mm graded aggregate Slabs supported on walls,beams and in kitchen shelves and the like items complete all as specified and directed. |
| 13 | M&L TMT steel bars 6mm to 8mm dia and over cut to length bent shape required, including cranking bending binding with mild steel wire (annealed) not less than 0.9mm dia quality conforming to relevant IS complete all as specified. |
| 14 | M & L for Formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work to provide smooth finish; not exceeding 200mm thick (Horizontal or sloping) complete all as specified. |
| 15 | Taking down cement plaster including raking out joints hacking for key and scrubbing down with water complete as specified and directed. All debris to be removed from MOD land completely.Rate of removal outside side from MoD land deemed to be included in the same item. |
| 16 | M&L for 10mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as spfd and directed. |
| 17 | M&L for 15mm thick rendering in CM 1:4 on other than fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as spfd and directed. |
| 18 | M & L for rendering 5 mm thick on ceiling on fair faces of brick or concrete surface in CM (1:3) finished even and smooth without using extra cement all as specified |
| 19 | S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminate PVC sheet, reinforced with MS square tube fixed in opening with smooth finish complete as per manufacturer's specifications and as directed by Engineer-in-Charge |
| 20 | S & F Factory Made Solid PVC Moulded Door Shutter with particle board, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing specified in SSR and as directed by Engineer-inCharge |
| 21 | S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21 |
| 22 | S&F 150 mm size aluminium handles, cast type anodised and fixed. |
| 23 | S&F 150 mm long aluminum, anodised,barrel tower bolts of extruded section and fixed. |
| 24 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 25 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 26 | M & L for PCC 1:2:4 type B1 in lintels upto 1.5m clearspan, cills, steps; seismicand other similar bands,plinth courses, string courses,lacing courses, parapets andrailings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and |
| 27 | S&F 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture roof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 28 | S&F 35mm thick factory made single extruded WPC (Wood Polymer Composite) sekelton shutters, open rebated and with SS wire gauze dia 0.63mm and average width of aperature 1.4mm in both side decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture roof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 29 | S & F 200 mm mild steel barrel tower bolts stove enamelled black with bright bolt and fixed |
| 30 | S & F 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed |
| 31 | S & F 100 mm size mild steel butt hinges medium weight cold rolled and fixed with screws or welding where required |
| 32 | S & F mild steel presssed handle 150 mm long oval types stove enamelled black |
| 33 | S&F floor door stopper of alluminium alloy body and tongue anodised with hard drawn steel spring over all length 140mm complete all as specified and as directed. |
| 34 | S&F factory made white colour casement UPVC windows(openable) are made of UPVC extruded profile with wall thickness of (2.3mm to 2.5mm), window profile with hollow section with multi chamber, Frame (50mmx30mm), sash (74mmx34mm), mullion profile (one vertical length in between frame and shutter 72mm x32mm), glazed through 5mm thick frosted glass with glazing bead (28mmx26mm) will be metered cut and fusion welded at all corners, including provision of suitable opening/cut-out for fixing exhaust fan of approved size, providing and fixing stainless steel mosquito wire mesh,driling of holes for fixing hardware with handle (150mmx17mm), suitable hinges(75mm) and drainage of water etc making arragement of fixing of hardware, EPDM gasket(1.mm to 3mm) thick, GI of (1.2mm tto 1.5mm) thick to be inserted in required profile , fame will be fixed by wall with 8mmx100mm long fasteners complete including taking down old window/ventilator any size and making good disturbed portion complete as per manufacture's specification and direction of Engr-in-Charge |
| 35 | S&F factory-made white colour uPVC window with convertible Window-AC provision, made from uPVC extruded profiles having wall thickness 2.3–2.5 mm with hollow multi-chamber sections, comprising uPVC frame 91 mm × 47 mm, divided into upper openable portion and lower sliding AC compartment; upper portion consisting of uPVC openable shutters (60 mm × 34 mm) with one shutter glazed with 5 mm thick tinted glass and one shutter fitted with SS wire mesh, fixed with glazing bead (18 mm × 16 mm) and provided with approved handles, locking arrangement and hinges; lower portion comprising sliding uPVC shutter/panel suitably reinforced with GI reinforcement 1.2–1.5 mm thick, arranged to slide open for installation of Window AC and to close fully when AC is not provided, ensuring rigidity and weather tightness. All profiles to be meter-cut and fusion-welded at all corners, including drilling of holes for fixing hardware, complete with EPDM gasket (1.2–3 mm thick), touch lock where required, roller wheels, water drainage arrangement and all necessary fittings. Frame to be fixed to wall with 8 mm × 100 mm long fasteners, including taking down existing window/ventilator of any size and making good disturbed portions, complete all as per manufacturer’s specifications and directions of Engineer-in-Charge. |
| 36 | Note:- The above item includes S&F mild steel safety grill fabricated from approved MS flats/bars, cut to size, welded, ground smooth and finished, fixed to masonry/RCC or window frame with approved holdfasts/clamps/anchor fasteners, painted with one coat of red oxide zinc chrome primer and two coats of synthetic enamel paint, without affecting smooth operation of UPVC shutters, mesh sash, locking or drainage system, including making good disturbed surfaces, complete all as specified and directed by Engr-in-Charge. No extra claim by the contractor for the same |
| 37 | M&L 20 mm granite stone slabs of approved shade,external edges moulded half rounded,bedded in cement screed 15 mm thick in CM 1:6 and jointed with grey cement slurry and pointed with white cement with admixtures of pigment to match the shade of the stone including grinding,polishing, dismantling floor and screeding etc complete all as specified and directed by Engr-in-charge.All debris must be removed outside from MoD land completely. |
| 38 | S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, also including waste coupling and waste pipe complete all as specified. |
| 39 | Note:-Fixing stainless steel kitchen sink of approved make and size, under-mount type, with top level flushed with granite platform, including cutting/making opening in granite stone to required shape and size, fixing sink in position properly embedded and secured using epoxy/approved adhesive and cement mortar, providing and fixing necessary clamps/brackets, sealing all around with approved silicone sealant to make the joint completely leak-proof, complete all as specified and as directed by Engineer-in-Charge. No extra claim for the same Please Enable Macros to View BoQ information |
| 40 | Note:-Fixing stainless steel kitchen sink of approved make and size, under-mount type, with top level flushed with granite platform, including cutting/making opening in granite stone to required shape and size, fixing sink in position properly embedded and secured using epoxy/approved adhesive and cement mortar, providing and fixing necessary clamps/brackets, sealing all around with approved silicone sealant to make the joint completely leak-proof, complete all as specified and as directed by Engineer-in-Charge. No extra claim for the same Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender