Tender For Addition/Alteration To Drainage For Otm Accn Of Mehdipatnam Inf Bn Under Ge Golconda
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
13 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Drainage For Otm Accn Of Mehdipatnam Inf Bn Under Ge Golconda
BOQ
| Sl. No. | Item Description |
| 1 | BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) File No 8164/E8 Tender Inviting Authority: GARRISON ENGINEER GOLCONDA Name of Work: ADDN / ALTN TO DRAINAGE FOR OTM ACCN OF MEHDIPATNAM INF BN UNDER GE GOLCONDA Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder including all TaxesRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | Excavation in trenches n.exc 1.50m wide and n.exc. 1.50 m depth and getting out in hard/dense soil complete all as specified and as directed. |
| 3 | Earth work in excavation of all kind of soil by mechanical means (Hydraulic excavator) means over areas (1.5 m in width as well as 10 sqm on plan) n.exc. 1.50 m depth including getting out and disposal of excavated earth lead up to 50 m complete all as specified and as directed. |
| 4 | Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm completely all as specified and as directed. |
| 5 | Removing excavated materials n'exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point in soils completely all as specified and as directed. |
| 6 | Demolition of brick work or stone masonry, built in cement mortar complete all as specified and as directed. |
| 7 | M&L for plain Cement Concrete Type C1 1:3:6 (using 40 mm graded stone aggregate) in foundation filling, mass concrete and similar works completely all as specified and as directed. |
| 8 | M & L brick work with fly ash bricks built in CM 1:6 straight or curved on plan exc 6 mtr mean radius old size bricks completely all as specified and as directed. |
| 9 | M&L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces of walls finished the surface even & smooth without extra cement, complete all as specified and directed. |
| 10 | M&L Walling of random rubble using Secunderabad stone, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed. |
| 11 | M&L for flush pointing with cement mortar 1:4 to random rubble masonry, uncoursed or brought up to courses complete all as specified and as directed. |
| 12 | Taking down cement plaster on brick or stone walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 13 | M&L Rendering, 15mm thick , in CM (1:4) mixed with water proofing compound as per manufacturer instruction on fair surfaces of brick or concrete walls, finished even and smooth without using extra cement complete all as specified and as directed.Note: WPC shall be measured and paid separately. |
| 14 | Supply only liquid water proofing compound of approved make complete all as specified and as directed. |
| 15 | M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on wall surfaces complete all as specified and as directed. |
| 16 | Material and labour for preparation of old decorated chequered tile, concrete surfaces etc and applying two coats of Colour wash (terra cotta ) complete all as specified and as directed. |
| 17 | M & L PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in copping, rounded chamfered, including necessary form work complete all as specified and as directed. |
| 18 | Demolition of cement concrete of any description in any position (Reinforced) complete all as specified and directed |
| 19 | S & F TMT bars 6mm dia and over up to and including 8mm dia as in reinforcement, including binding with and including tying with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed |
| 20 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 21 | M & L for PCC 1:2:4, type B1 (using 20 mm graded stone aggregate as in pre-cast cover slabs for manholes / drains etc including necessary form work set in CM 1:4 complete all as specified and as directed. (Reinforcement will be measured & paid separately) |
| 22 | Demolition of cement concrete in ground floor or paving of any description n.exc. 15cm thickness (Un re-enforced) below or above GL complete all as specified and directed. |
| 23 | M&L for 75 mm thick cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) for footpath / hard standing finished spike rolling to surface or making impression of expanded metal whilst while the concrete is green complete all as specified and directed. |
| 24 | M&L for plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in sub base/foundation filling concrete complete all as specified and directed. |
| 25 | Dismantling of stone slab and tiles of any description or thickness in floors, aprons laid , bedded and pointed any mortar complete all as specified and directed. |
| 26 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement and no pigment set and jointed as per manufacturers instructions, laid over sand cushioning, including dismantling the existing stone slabs/tiles of any description or thickness etc complete all as specified and directed. Note: (i) Rate quoted by the tenderer shall deemed to inclusive of filleting the sides of pavement with plain cement concrete (1:2:4) type B1, finished even and fair.(ii) Sand cushioning shall be measured and paid separately |
| 27 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed |
| 29 | M&L for chequered cement concrete, coloured tiles, textured finished of size 250 x 250 x 22 mm/300 x 300 x 22 mm thick set jointed in neat cement slurry and pointed with white cement and pigment in floors to match with colour of tiles, including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 30 | M & L for PCC (1:2:4), type B0 (using 12.5 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 31 | S& F RCC Hume pipe 450 mm bore, class NP2, laid and jointed complete with collars complete all as specified and as directed. |
| 32 | S & F for Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality-A,etc complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender