Defence Statutory Bodies & Commissions/Committees Closing in 15 days TDR #58522318

Tender For Addition/Alteration To Various Otm Accn At Af Stn Kalaikunda Under Ge (Af) Kalaikunda

Issued by Statutory Bodies & Commissions/Committees · Medinipur West, West Bengal
Tender Value
43.61 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
15 days left
EMD
87220
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur West → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Addition/Alteration To Various Otm Accn At Af Stn Kalaikunda Under Ge (Af) Kalaikunda

BOQ

Name of Work:- ADDN /ALTN TO VARIOUS OTM ACCN AT AF STN KALAIKUNDA UNDER GE (AF) KALAIKUNDA
Sl. No. Item Description
1Dismantling of plain or corrugated steel/ AC sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including translucent sheet at any height complete all as specified and as directed.
2M&L Pre- painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
3All as per Item No.02.00 above but in Plain steel sheet for Ridges complete all as specified and as directed.
4Dismantling of wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness including cover fillets of any description including all snap grids and hanging arrangements complete all as specified and as directed.
5S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting with butterfly fillet level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
6S&F Anodised aluminium snap/GI grid frame work for false ceiling Size of grid 605 x 605mm complete all as specified and directed.
7M&L 6mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed.
8Dismantling unframed timber scantlings 40 Sq cm and over in section and in any position.
9S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including distance pieces, cleats etc Fe-410-W (Gde-E-250)quality-A complete all as specified and as directed.
10M&L preparation of new or previously untreated steel or iron surfaces of any description over 10cm in girth or width not otherwise described and applying one coat of red oxide , zinc chrome primer and two coats of synthetic enamel paint.
11Demolition of Brickwork masonry, built in cement mortar at ordered portions including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.
12M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in old size bricks in 1:4 cement morter complete all as specified and as directed.
13M&L brick work with fly ash sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
14M&L rendering 10mm thick in CM 1:6 on fair face of brick work surfaces finished even and smooth with out using extra cement all as specified.
15M&L rendering 15mm thick in CM 1:4 on other tha fair face of brick work surfaces finished even and smooth with out using extra cement complete all as specified and as directed.
16M&L rendering 5 mm thick in CM 1:3 on fair face of concrete surfaces as in ceiling, chajja, shelves etc finished even and smooth with out using extra cement complete all as specified and as directed.
17M&L Preparation of new surfaces of ceiling including cornices, plasters applying three coat of white wash complete all as specified and as directed.
18M&L Preparation of old surfaces of ceiling including cornices, plasters applying two coat of white wash complete all as specified and as directed.
19M&L preparation of newly plastered surfaces of walls, and applying two coats acrylic distemper on wall ,over and including with a coat of 1 mm thick white wall care putty premium quality over and including a coat of primer on new plastered or unplastered surfaces on wall, complete all as specified and as directed.
20M&L preparation of old plastered surfaces of walls, and applying two coats acrylic distemper on wall ,over and including with a coat of 1 mm thick white wall care putty premium quality over and including a coat of primer new plastered or unplastered surfaces on wall, complete all as specified and as directed.
21M&L Preparation of New surface of walls, chajja, facia and applying two coat of Exterior emulsion paint (weather coat) over one coat of primer complete all as specifed and as directed.
22M&L Preparation of old surface of walls, chajja, facia and applying two coat of Exterior emulsion paint (weather coat) over one coat of primer complete all as specifed and as directed.
23M&L 75 mm thick cement Concrete Type C-2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and as directed.
24M&L Ready mix mortar ( Polymer Modified mortar of redispersible polymer powder type) by means of making good of any exposed reinforced surface of chajja, lintel, bend cill, reinforced beam or any other fallen surface by means of cleaning old rusted surface of reinforcement by applying (a) alkaline rust removing chemicals on exposed reinforces surface (b) epoxy based zinc rich primer over reinforced surface (c) epoxy bonding agent of Sika Top -122 HS or equivalant as per manufacturer direction complete all as per specified and as directed (Notes: Rate are deemed to be included with necessary formwork in repair upto G+3 storied building ) Make: Sika Top-122 HS or equivalent.
25M&L applying waterproofing treatment on Damp affected wall surface using two component acrylic polymer modified cementitious high performance coating of approved make in two coats including preparation of surface by cleaning of surface removal of plaster/putty etc complete all as specified and as directed. (Make: Asian paint Smartcare Damp BLOCK 2K)
26Complete removal of existing treatment on wall/roof /roof projection including facia, cornices etc by scrapping with mechanical sander (having mechnical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean, free, from dust, loose paint etc by skilled labour complete all as specified and directed.
27M&L providing plain cement concrete with Nano filter 1; cement 1; sand 2; aggregate 4; type B-1 using 20mm graded stone aggregate as in roof padding laid in slope as per requirement mixed withg integral water proofing liquid admixture as per manufacturer's instruction complete all as specified and as directed. Note : (i) Minimum thickness of PCC shall be 30 mm.(ii) Integral water proofing liquid admixture shall be measured and paid separately under appropriate item here in after(iii) PCC shall be laid to achieve true slope towards the drain/ weep holes.
28M&L applying a coat of Nano technology based water proofing compound (1 part powder : 1 part liquid) of desired consistency with nylon brush @ 5 sqm/ kg coverage over vertical/ horizontal surface of RCC roof and parapet complete all as specified and as directed.
29M&L water proofing :(a) Surface Preparation - Mild Chipping of the surface , clean the surface with Nano Bio wash. (b) If online leakage found seal with nano magic and apply nano bond open the cracks by making 'V' groove , filling cracks with Nano Crack Filler.(c) Apply Nano carbon based shorted chain Nano bond coat(d) Providing and applying Nano water Base water proof compound one coat with surface preparation using brush, not containing toxic materials like Pb, Cr, Zn; having defect free nano-particles with inhibiting characteristics having bacteria killing rate above 98% and anti fungal properties, with super-hydrophobic properties with contact angle of water more than 75 degree, permeable type with elongation (stretch ability) of more than 300% in a nano--structured self assembled dispersion system with VOC level of less than 1%, 60 micron DFT.e) If ant crack found open and fill the crack with nano carbon base filler and bond coat and use nano wall filler to reduce the undulation.(f) Apply Nano high penetration Bond coat two coat.(g) Providing and applying Nano Barrier coat paint/ Nano water base water proof paints 2 coats over screed concrete using brush , not containing toxic materials like Pb , Cr, An; having defect-free nano-particles with inhibiting characteristics having bacteria killing and anti-fungal properties, with superhydrophobic properties with contact angle of water more than 750, with elongation (stretch ability) of more than 300% in a nano-structured self assembled dispersion system with VOC level of less than 1% , 60 micron DFT per coat
30Removal of unserviceable material obtained from demolition to a distance of exc 250m but n. exc 1000m beyond the lead included in the rates, including loading, unloading and stacking at the destination, complete all as specified and as directed.
31Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
32S&F point wiring for one light point with 1.5 Sqmm FRLSH multi stranded copper conductor 1100 V grade,as per IS 694: 2010 , ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLSH cable drawn in & including PVC casing caping of 25 mm wide, with double locking type, including all accessories casing caping as approved by EIC, with PVC 1.5 mm multi stranded insulated unsheathed copper wire, ISI marked of green colour for continous earth, including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable duly painted with aluminium paint inside and anticorrosive paint out side with 2.8 mm thick bakelite hylam sheet cover, ISI marked with CM/L no. for mounting switch & sockets for the following:-
33All as per item No.32.00 here in before but for one Fan point controlled by one, one way switch and regulator
34All as per item No. 32.00 here in before but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .
35All as per item No 32.00 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point
36S&F in modular switch 1 way 6A, 1 Module complete all as specified and as directed.
37S&F in modular switch 1 way 16A, 1 Module complete all as specified and directed
38S&F in modular socket 6A 2/3 Pin combined -2 module including repairing/replacement of whole modular fittings and frame with new one as per existing fittings complete all as specified and as directed.
39S&F in modular switch socket combination 16A , 6 Pin combined -3 module including repairing/replacement of whole modular fittings and frame with new one as per existing fittings complete all as specified and directed.
40S&F in Modular metal flush box of 1/2 module with white cover plate including make good to match with existing surface complete all as specified and directed.
41S&F in Modular metal flush box of 3 module with white cover plate including make good to match with existing surface complete all as specified and directed.
42S&F in Modular metal flush box of 4 module with white cover plate including taking out u/s including make good to match with existing surface complete all as specified and directed.
43S&F in Modular metal flush box of 6 module with white cover plate including taking out u/s including make good to match with existing surface complete all as specified and directed.
44S&F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and directed.
45S&F in repair of stepped type Modular electronic fan regulator 1- module , 100 watt flush type , on the existing hylam laminated sheet etc as required.complete all as specified and directed by EIC . including taking down old unserviceable.Make: Anchor (Roma) cat No :- 289510 or equivalent of make : Legrand/ Havells (Crabtree)
46Taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.
47S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 100 Amps rated busbar, Confirming to IS as per IEC 61439-3, 8 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 , IK 09 including fixing the DB box flush in wall of any type and making good the distrubed surface to match as the existing with complete all as specified and as directed.
48S&F MCB SPN, 32 - 63 Amps , 230 volts 10 KA, C Series suitable for fixing on MCB DB incl taking down old unservieable complete all as specified and as directed.
49S&F MCB SP 6 to 30 Amps 240 volts C Series for fixing on MCB DB's incl taking down old unserviceable complete all as specified and as directed.
50Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.
51S&F Sub main wiring with Two run of single core (1 phase) PVC insulated unsheathed cable 1100 volts grade, 6.0 Sqmm size with multistranded copper conductor, FRLSH cable drawn in with and including PVC casing capping not less than 32 mm ISI marked including all accessories of casing caping including one run of PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and directed by EIC. ( 2 x 6.0 sqmm + 1 x 6.0 Sqmm earth wire).
52All as per Item No 51.00 here in before but of size 1.5 Sqmm 3 core for single phase phase, Neutral and Earth. ( 2 x 1.5 sqmm + 1 x 1.5 Sqmm earth wire).
53S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 60 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete incl removal of old unserviceable fitting complete all as specified and as directed.
54S&F LED light fitting 20W, 4ft, 220 volt AC, having colour temperature day light (6500K), Decorative ultra slim square profile LED lighting fixture with extruded alumunium housing incl taking down old unserviceable complete all as specified and directed.
55Taking down existing panel light fitting any type and S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC, having colour temperature day light (6500K), Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong / Grid ceiling incl taking down old unserviceable light fitting complete all as specified and directed. Make : Havells/Crompton/Philips/Orient
56Taking down existing panel light fitting any type and reifixing the same LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC, complete all as specified and directed.
57Taking Down old unservieable LED high bay Light fitting and Supply and fix Round highway LED light 120 watt operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen efficacy of minimum 100 lumens per watt, isolated electronic LED driver incl taking down light fittings from any hight up to 18 mtrs complete all as specified and as directed. Make : Havells/ Crompton/ Philips/ Orient
58Taking down existing serviceable High bay light fitting any type and reifixing the same at same location complete all as specified and directed.
59S&F heavy duty exhaust fan 450 mm sweep MS body with antidust painting, 4 blade with heavy duty motor and double ball bearing, single phase 230/240 volts copper wounds complete with all accessories as bird guard/ louvers shutters etc incl making connections with 3 core flexible multistranded copper conductor of size 0.75 Sqmm run through flexible pipe all as specified and as directed including cutting holes and making good the disturbed surfaces of walls in CM(1:4) and finishing the surface as per existing color scheme complete all as specified and as drected. (Note - Old unserviceable fan should be deposited in MES Store.) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58522318
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 43.61 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Addition/Alteration To Various Otm Accn At Af Stn Kalaikunda Under Ge (Af) Kalaikunda
Basic Detail
Tender No C/8285/E8
Bidding Type Tender
Location
City Medinipur West
State West Bengal
Key Dates
Publish Date 13 Nov 2026
Submission Date 07 Dec 2026
Open Date 09 Dec 2026
Finance
Tender Value 43.61 Lakhs
Tender Fee 500
EMD 87220
Exemption Available
Document List
BOQ_895770.xls
d1321fe7-f7ea-49dc-b9d7-accd015812a3.html
TenderDocuments_8285.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 15 days
Dec 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 17 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_895770.xls

html

d1321fe7-f7ea-49dc-b9d7-accd015812a3.html

pdf

TenderDocuments_8285.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender