Defence Statutory Bodies & Commissions/Committees Closing in 13 days TDR #58522291

Tender For Providing Of 04 X Toilet Cum Bathroom Against Job No 08/Rev/Hq 2 Sect/Rr/2026-27 Under Age B/R (P) Ge 861 Ews.

Issued by Statutory Bodies & Commissions/Committees · Anantnag, Jammu and Kashmir
Tender Value
15.38 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
13 days left
EMD
30800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Providing Of 04 X Toilet Cum Bathroom Against Job No 08/Rev/Hq 2 Sect/Rr/2026-27 Under Age B/R (P) Ge 861 Ews.

BOQ

Name of Work:- PROVN OF 04 X TOILET CUM BATHROOM AGAINST JOB NO 08/REV/HQ 2 SECT/RR/2026-27 UNDER AGE B/R (P) GE 861 EWS.
Sl. No. Item Description
1Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in Soft/Loose soil complete all as specified and as directed by Engineer-in-Charge.
2Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, cable, pipes etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in Soft/ Loose soil complete all as specified and as directed by Engineer-in- charge.
3Excavating in trenches, not exceeding 1.5 m in depth and getting out in Hard/ Dense soil complete all as specified and as directed by Engineer-in- charge.
4Add to item No 3 above for each additional 1.5 mtr or part thereof in depth beyond the first 1.5 m in hard/ Dense soil complete all as specified and as directed by Engineer-in- charge.
5Material & Labour for Hardcore of broken stone or boulders ,gauge exc 63mm but not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge..
6Material & Labour for PCC 1:4:8 , Type - D2, using 40mm graded stone aggregates as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.
7Material & Labour for Reinforced cement concrete (Design Mix) M-25 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by Engineer-in-Charge.NOTE :- Form work and Steel reinforcement shall be measured and paid seperately under appropriate items of Schedule 'A' BoQ.seperate items.
8Material & Labour for Reinforced cement concrete (Design Mix) M-25 as in Columns, pillars, piers, posts and struts complete all as specified and directed by Engineer-in-Charge.NOTE :- Form work and Steel reinforcement shall be measured and paid seperately under appropriate items of Schedule 'A' BoQ.seperate items.
9Material & Labour for Reinforced cement concrete (Design Mix) M-25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in-Charge.NOTE :- Form work and Steel reinforcement shall be measured and paid seperately under appropriate items of Schedule 'A' BoQ.seperate items.
10Material & Labour for Reinforced cement concrete (Design Mix) M-25 as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like complete all as specified and directed by Engineer-in-Charge
11Material & Labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.
12Material & Labour for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.
13Material & Labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on rough finished flat surface of concrete complete all as specified and as directed by Engineer-in-Charge.
14Material & Labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions, in square, rectangular or polygonal on rough finished surface of concrete complete all as specified and as directed by Engineer-in-Charge.
15Material & Labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. on flat rough finished surface of concrete complete all as specified and as directed by Engineer-in-Charge.
16Material & Labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) on rough finished flat surface of concrete complete all as specified and as directed by Engineer-in-Charge.
17Material & Labour for Brickwork with sub class ‘B’ burnt clay old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.
18Material & Labour for Brickwork with sub class ‘B’ burnt clay old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.
19Material & Labour for 100 mm thick PCC 1:4:8 ,Type-C2 ,using 40mm graded stone aggregates as in sub base of flooring complete all as specified and directed by Engineer-in-Charge.
20Material & Labour for 75mm thick cement concrete 1:3:6 , Type - C2, using 40mm graded stone aggregates as in plinth protection/ sub base of floor finishes surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
21Material and labour for Rendering 15mm thick in Cement Mortar 1:4 using liquid waterproofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces of walls , finish even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
22Material and labour for Rendering 10mm thick in Cement Mortar 1:6 , on fair faces of brick work or concrete surfaces of walls , finish even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
23Material & Labour for Non skid ceramic coloured joint free tiles , thickness 7mm to 8mm thick (square/ rectangular), colour as approved by Engineer-in-charge area of each tiles exceeding 0.06 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
24Material & Labour for Gazed Coloured Ceramic tiles , size 300mm x 200mm / 450mm x 350mm x 7mm to 8mm thick, colour as approved by Engineer-in-charge as in vertical surfaces set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
25Material and labour for preparation of new surface of walls, with and including two coats of cement base paint ,over with and including one coat of alkali resistant priming paint complete all as specified and directed by Engineer-in-Charge.
26Material and labour for preparation of newly plastered surfaces of walls and applying three coats of white wash over a coat of primer complete all as specified and as directed by Engineer-in-charge.
27Supply & Fixing Mild steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe 410 -W (Gde- E- 250) quality-A including distance pieces, cleats etc. complete all as speicied and as directed by Engineer in charge.
28Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.
29Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.
30Material & Labour for preparation of newely steel surfaces of any description, over 10 cm in width or girth or otherwise described , with and including applying two coat of syntheic enamal paint over with and including one coat of red oxide zinc chrome primer complete all as spefied and as directed by Engineer-in-Charge.
31Material and labour for steel ventilator with top hung shutter including hinges, steel peg stay compete all as specified and as directed by Engineer-in-charge.
32Supply and Fixing 3mm thick sheet glass of ordinary quality and glazing with oil putty in square , not exceeding 0.50 Sqm each in pane complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information
33Supply and Fixing 3mm thick sheet glass of ordinary quality and glazing with oil putty in square , not exceeding 0.50 Sqm each in pane complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58522291
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 15.38 Lakhs
LAST DATE 05-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Providing Of 04 X Toilet Cum Bathroom Against Job No 08/Rev/Hq 2 Sect/Rr/2026-27 Under Age B/R (P) Ge 861 Ews.
Basic Detail
Tender No GE 861 EWS-79(T)/2026-27
Bidding Type Tender
Location
City Anantnag
State Jammu and Kashmir
Key Dates
Publish Date 13 Nov 2026
Submission Date 05 Dec 2026
Open Date 08 Dec 2026
Finance
Tender Value 15.38 Lakhs
Tender Fee 500
EMD 30800
Exemption Not Available
Document List
b4b4e769-8274-4dc8-bc75-a65b2059f9e3.html
BOQ_895695.xls
Tender79T.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Dec 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
html

b4b4e769-8274-4dc8-bc75-a65b2059f9e3.html

xls

BOQ_895695.xls

pdf

Tender79T.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender