Power Boards / Undertakings / PSU Closing in 2 days TDR #58518932

Tender For Tnpgcl - Nctpp-Iii (1X800 Mw) - Se/M-Ii Circle - Tm Division - Renewal Of Existing Worn-Out Plate Heat Exchanger Reducers (Acw-10 Nos) From Ms To Ss316 Including The Cost Of Materials During The Year 2026-2027

Issued by Boards / Undertakings / PSU · Thiruvallur, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Nov 2026
2 days left
EMD
23300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Tnpgcl - Nctpp-Iii (1X800 Mw) - Se/M-Ii Circle - Tm Division - Renewal Of Existing Worn-Out Plate Heat Exchanger Reducers (Acw-10 Nos) From Ms To Ss316 Including The Cost Of Materials During The Year 2026-2027

BOQ

Name of Work:- TNPGCL - NCTPP-III (1x800 MW) – SE/M-II Circle – TM Division – Renewal of Existing worn-out Plate Heat Exchanger Reducers (ACW-10 Nos) from MS to SS316 including the cost of materials during the year 2026-2027
Sl. No. Item Description
1Charges for Fabrication of SS316 Eccentric Reducer 500x350 NB with Flanges at both ends.Marking and development of eccentric reducer profile, cutting of SS316 plate, edge preparation and beveling, rolling/forming of 8mm thick SS316 plate, fabrication of 500 NB straight portion, fabrication of 350NB straight portion, fabrication of eccentric tapper portion, setting and maintainig of 76.2mm eccentricity, fitup and tack welding, longitudinal seam welding, fit up of end flanges, circumferencial welding of reducer of flanges, Alignment and dimensional correction, grinding and weld dressing, material handling and shifting during fabrication and Flange Facing, bore finishing, bolt-hole drilling/finishing, deburring, flange parallelism correction, Flange alignment, bolt-hole orientation checking, Phonographic/serrated flange face finishing and Final dimensional checking.
2Charges for Fabrication of SS316 Eccentric Reducer 300x250 NB with Flanges at both ends.Marking and development of eccentric reducer profile, cutting of SS316 plate, edge preparation and beveling, rolling/forming of 6.4mm thick SS316 plate, fabrication of 300 NB straight portion, fabrication of 250NB straight portion, fabrication of eccentric tapper portion, setting and maintaining of 25.4mm eccentricity, fitup and tack welding, longitudinal seam welding, fit up of end flanges, circumferential welding of reducer of flanges, Alignment and dimensional correction, grinding and weld dressing, material handling and shifting during fabrication and Flange Facing, bore finishing, bolt-hole drilling/finishing, deburring, flange parallelism correction, Flange alignment, bolt-hole orientation checking, Phonographic/serrated flange face finishing and Final dimensional checking.
3Charges for Pickling and passivation of SS316 fabricated eccentric reducer including surface preparation, chemical treatment, rinsing, and final cleaning.
4Charges for Dismantling of existing 500x350 NB reducer by isolation and removal of connected flange bolts, loosening/removal of the reducer from the existing piping arrangement, provision of 1 ton chain block for safe lowering and handling, shifting of the dismantled reducer to the designated location.
5Dismantling of existing 300x250 NB reducer by isolation and removal of connected flange bolts, loosening/removal of the reducer from the existing piping arrangement, provision of 1 ton chain block for safe lowering and handling, shifting of the dismantled reducer to the designated location.
6Erection of new 500x350 NB SS316 Eccentric reducer at the existing piping location, including positioning and lifting using 1 ton chain block, alignment of reducer with existing piping, matching and alignment of flange bolt holes, insertion and tightening of flange bolts, checking of alignment and correction as required
7Erection of new 300x250 NB SS316 Eccentric reducer at the existing piping location, including positioning and lifting using 1 ton chain block, alignment of reducer with existing piping, matching and alignment of flange bolt holes, insertion and tightening of flange bolts, checking of alignment and correction as required.
8Providing approach and working platform for the height of 3.5 mtr, Providing chain block arrangement for removal of reducer.
9Material PortionMaterial Cost to fabricate SS316 500x350 Eccentric Reducer with flanges at both ends. (166.90 Kg per Reducer including wastage)
10Material Cost to fabricate SS316 300x250 Eccentric Reducer with flanges at both ends. (61.92 Kg per reducer including wastage)
11M33x185 mm Bolt & Nut with 2 Nos washer SS316L
12M27x160 mm Bolt & Nut full threaded with 2 Nos washer SS316L
13New champion make style 54 Non metallic Gasket 2000x1500x3mm Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58518932
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 19-11-2026
Authority
Authority Name Tamil Nadu Generation And Distribution Corporation Limited
Work Description Tender for Tnpgcl - Nctpp-Iii (1X800 Mw) - Se/M-Ii Circle - Tm Division - Renewal Of Existing Worn-Out Plate Heat Exchanger Reducers (Acw-10 Nos) From Ms To Ss316 Including The Cost Of Materials During The Year 2026-2027
Basic Detail
Tender No CE/SE/M II/NCTPS III / 30 /2026-27
Bidding Type Tender
Location
City Thiruvallur
State Tamil Nadu
Key Dates
Publish Date 13 Nov 2026
Submission Date 19 Nov 2026
Open Date 20 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 23300
Exemption Available
Document List
1c1df80b-0615-4c84-a6a4-83a610aeabdd.html
BOQ_871909.xls
Spec30.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

1c1df80b-0615-4c84-a6a4-83a610aeabdd.html

xls

BOQ_871909.xls

pdf

Spec30.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender