Tender For Repairing Work Of Bituminous Road From Khitish Debsharma House To Utpal Paul House Via Masankura Market Under Bhawairthana Gram Panchayat Within Sitalkuchi Block In The District Of Coochbehar (Length 700.00 M , Width 3.50M )
Tender Value
47.86 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
13 days left
EMD
95723
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coochbehar → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Work Of Bituminous Road From Khitish Debsharma House To Utpal Paul House Via Masankura Market Under Bhawairthana Gram Panchayat Within Sitalkuchi Block In The District Of Coochbehar (Length 700.00 M , Width 3.50M )
BOQ
| Sl. No. | Item Description |
| 1 | By Mix in Place MethodConstruction of granular sub-base by providing graded materials such as natural sand/crushed gravel/crushed stone/combination depending upon the required grading , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator and compacting with vibratory roller to achieveat least 98%of themaximum dry density for the material determined as per IS:2720 (Part 8), complete as per clause 401 desired density, complete as per clause 401 ii) Rate per cum for grading-II Material |
| 2 | Water Bound Macadam Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniformthickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages toproper gradeand camber,applying and brooming requisite type of screening/binding Materials tofillup the interstices of coarse aggregate, watering and compacting to the required density (Reference to MoRT&H's specification 404).By Manual Means Grading-2 (Table 400-9) (ii)(b) Using Screening (Table 400-10) Type-B (11.2 mm aggregate) |
| 3 | Prime Coat Providing and applying primer coat with cationic bitumen emulsion SS1 grade conforming toIS:8887 on prepared porous granular surface including clearing of road surface and spraying primer using mechanical means (Reference to MORT&H's specification clause 502).i)On WMM/WBM surface @ 0.70-1.0kg/sqm. |
| 4 | Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complyingwith IS:8887using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).ii)On Granular surface treated with primer @ 0.25kg-0.30 /sqm. |
| 5 | Bituminous Macadam Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504).ii)for Grading 2 (19 mm nominal size) |
| 6 | Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complyingwith IS:8887using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).i)On bituminous surface @ 0.20kg-0.3kg /sqm. |
| 7 | Open - Graded Premix Surfacing Providing, laying and rolling of open-graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line,grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grade (Reference to MORT&H's specification clause 510)10.(1) Case-I:Mechanical method using approved grade Bitumen and HMPof appropriate capacity not less than 75 tonnes/hour . |
| 8 | Seal Coat (Type B) Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511). 12(ii)Case - II : Type B rovidingandlayingofpremixsandsealcoat withHMPusingapproved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. |
| 9 | Direction and Place Identification Signs with size more than0.9 sqm size Board. Providing and erecting direction and place identification retro reflectorised sign as per IRC :67 made of high intensity gradesheeting vide clause 801.3, fixed over aluminium sheeting, 2mm thick with area exceeding 0.9 sqm supported on a mildsteel angle iron post 75mmx75mmx6mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M15grade cement concrete 45cmx 45cmx60cm, 60cm below ground level as per approved drawing (Reference to MORT&H's specification 801). |
| 10 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area,thickness of 2.5mmis exclusiveof surface applied glass beads as per IRC:35 .The finished surface to belevel,uniformandfreefromstreaks and holes (Reference toMORT&H's specification 803). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender