Tender For Repairing Of 1475 Kw, 6.6 Kv Crompton Make H.T. Motor By Reinsulating Of Over Heated Coils & Replacing At Spc Iii
Tender Value
18.37 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
9 days left
EMD
37000
Bank guarantee accepted
Document Fee
2354
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of 1475 Kw, 6.6 Kv Crompton Make H.T. Motor By Reinsulating Of Over Heated Coils & Replacing At Spc Iii
BOQ
| Sl. No. | Item Description |
| 1 | Shifting of motor from foundation to working place dismantling by taking out rotor from stator, checking bearing cleaning stator with overhead brandings and drying it by heating up to completion |
| 2 | Taking out overheated/damaged 72 No. coil from stator safely in such manner that coil conductor may not damaged checking and testing of coils by high voltage testing machine and megger .Rate to include all labour material and T&P etc required for proper completion of work. |
| 3 | Repairing of damaged coil by removing damaged insulating with F class insulating material like cotton tape, Nomex tape, polyester mica tape, .Caption mica tape, Glass tape &Epoxy Resinas required for proper insulating (F class). |
| 4 | Supply and providing of copper strip conductor of suitable for 1475 KW Crompton make 6.6 kv 3phase motor with making H.T. coil as per design and sample of proper size with labour charge for extracting old burnt coil and replacing new one at the place properly i/c buyback of old and used dismanteled Copper strip(405 kg) taken out from the HT motor during |
| 5 | Rewinding of H.T. stator by inserting 72 nos. coil in stator wedging of coil by polyester chord of suitable size, connecting coil together with silver brazing rod and insulation over heated braiding. |
| 6 | Spray varnishing of H.T. Stator and Rotor with insulating varnish i.e. bectol Red /Gray Gel epoxy resin and reheating to required dryness &I.R. Value |
| 7 | Tightening of loose wedges by reweding with H.G.L. Packers o/s alongwith patch work with suitable insulating materials and laying of coil spacers by polyester chord of suitable size for loose wedges up to 21-40% |
| 8 | Taking out bearing cleaning degreasing making threads on shaft providing SS lock nut and washer, assembly, alignment etc.Driving End (DE) |
| 9 | Taking out bearing cleaning degreasing making threads on shaft providing SS lock nut and washer, assembly, alignment etc Non Driving End(NDE) |
| 10 | Reassembly of motor, Shifting from working place to foundation, installation and testing no load |
| 11 | Replacing motor service Connection lead (Copper) including end Connections. |
| 12 | Alignment of motor with pump Radially and axially both by using S.S. Shims, Rubber Coupling bushes etc as required and then testing on No load. Alignment of motor with pump Radially and axially both by using S.S. Shims, Rubber Coupling bushes etc as required and then testing on No load. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender