Tender For Repair / Maintenance To Flexible/Rigid Pavements, Road Furnitures Items, Area Drainage System, Culvert, Certain Connected Ways And Other Misc Items In Technical Area At Af Stn Sulur
Tender Value
84 Lakhs
Estimated cost
Bid Submission
12 Dec 2026
21 days left
EMD
1.51 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance To Flexible/Rigid Pavements, Road Furnitures Items, Area Drainage System, Culvert, Certain Connected Ways And Other Misc Items In Technical Area At Af Stn Sulur
BOQ
| Sl. No. | Item Description |
| 1 | M&L for scarifying or picking graveled, macadam or bituminous macadam surfaces in area n.exc 400 sqm, exc 50 mm and n.exc 100 mm deep, complete all as specified and as directed. |
| 2 | M&L Laying and compacting 75 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013 complete all as specified and as directed |
| 3 | M&L for repair to potholes any depth n.exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc., cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) and rolled with tandem vibratory roller to a uniform smooth surface complete all as specified and as directed. |
| 4 | All as per item Ser No. 3 here-in-before but making good by applying tack coat with bituminous primer @5 kg per 10 sqm, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cum of sand), again well rammed (including supply of premix binder and sand) depth of potholes n.exc 30 mm complete all as specified and as directed. |
| 5 | M&L for the repair of potholes of an additive or average thickness of not exceeding 50mm including sweeping the area free from dust, mud, and water, and scoring/tack-coating the sunken or deteriorated surfaces of roads and pathways and make good the surface applying a ready-mix, all-weather bituminous cold-mix paste formulated with liquid asphalt, performance-enhancing chemicals, and anti-stripping agents blended with graded aggregates, thoroughly rammed and compacted using a hand rammer or mechanical compactor until it is perfectly flush with the surrounding road surface. Note:- The weight of ready-mix, all-weather bituminous cold-mix paste shall be measured for payment purpose. |
| 6 | M&L for preparing unsurfaced \\"Water bound macadam/ Wet mix macadam surface\\" by brushing with wire brush for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags or with mechanical air compressor to remove all loose dirt etc. and applying evenly a priming/tack coat with bituminous primer (paving bitumen VG-10) @ 10 kg per 10 Sqm complete all as specified and as directed. |
| 7 | M&L for Premix Bituminous Macadam laid with mechanical paver and material transported in tipped (covered) vehicle and rolled and compacted to required gradient and camber with tandem vibratory roller (consolidated thickness 75 mm or less) using binder content of paving bitumen (VG-30) by 4 % weight of total mix, complete all as specified and as directed. |
| 8 | M&L for Preparing for \\"Bituminous macadam surfaces and existing black top surface\\" by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer of VG-10 @5 kg per 10 Sqm , complete all as specified and as directed. |
| 9 | M&L for Premix Semi-dense Asphaltic Concrete 40 mm (consolidated thickness) with 5.5 % binder content by weight of total mix (Paving bitumen VG-30) laid with mechanical paver and material transported in tipped (covered) vehicle and compacted to required camber and gradient with tandem vibratory roller complete all as specified and as directed. |
| 10 | Taking down existing Cat eyes of any size, any description complete all as specified and as directed. |
| 11 | S&F Cat's eye retro reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed. |
| 12 | S&F Solar cat's eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency monocrystalline solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and as directed. |
| 13 | Taking down existing metal delineator of any size, any description complete all as specified and as directed. |
| 14 | S&F Metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 15 | Demolition brick work or stone / boulder masonry built in cement mortar as in wall etc complete all as specified and directed. |
| 16 | M&L Brickwork with fly ash bricks using old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed. |
| 17 | Rendering 15mm thick as fair faces of bricks in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed. |
| 18 | M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkali resistant priming paint complete all as specified and as directed. |
| 19 | M&L Hot applied thermoplastic compound 10 CM or exc 10 CM width and 2.5 mm thick (excluding thickness of glass beads ) and providing selecting glass beads @ 250gm per sqm as per IRC-135, finished surface to be leveled uniform and free from streaks and holes including cleaning of surface to remove all loose dirt etc. complete all as specified and as directed. |
| 20 | S&F in repairs for Speed bump (SB-01) made out of plastic material so that it can bear maximum load on it. Two highly reflective reflectors moulded in PMMA material welded with ABS base plate through ultrasonic welding process and then fixed on speed bump so that dust and water cannot touch reflectors inside area. Metallic bolts are used for installation on road. size of size L=250mm, W=750mm, H=75mm) including taking down and removing rubbish material to outside MD land complete all as specified and as directed. |
| 21 | S&F in repairs Convex mirrors of size 100 cm for road safety made up of polycarbonate reflective mirror body made of ABS suitable for outdoor use complete fixed with MS pipe of 40 mm dia, length 2.4 mtr embedded in PCC 1:2:4 type B1 of size 450 mm x 450 mm including earth work complete all as specified and as directed. |
| 22 | S&F in repairs for Stainless Steel Sign board pattern (SS to SS-7), fully retro reflective sign board made of 3mm thick ACP (Aluminum composite panel) sheet framed with 40mm round SS pipe having front/back (both) side entire surface fully bonded with retro reflective sheeting of HIP (High Intensive Prismatic) grade having pressure sensitive adhesive. boarders and message as indicated cut out. Back ground in Blue and matter in white colour tape having two posts of 50mm round SS pipe 3.0 mtr long including excavating post holes of 30 x 30 x 30 cm and embedded in PCC 1:3:6 and including taking down and removing rubbish material to outside MD land complete all as specified and as directed. |
| 23 | M&L for cement concrete in copings, bands, etc. PCC 1:2:4 type B0 (12.50 mm graded stone aggregate) including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 24 | Excavating in trenches, n.exc1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil. |
| 25 | Returning filling in including spreading leveling watering & well ramming in layers n.exc 25cm each in soil. |
| 26 | Removal of excavated material in hard/dense soil exc 1.5km but n.exc 5 km and depositing where directed at a level n.exc 1.5 m above the starting point in soil concrete all as specified and as directed. |
| 27 | M&L for PCC type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified and as directed. |
| 28 | S&F for 300mm dia reinforcement concrete pipes NP3 , laid and jointed complete with collars and taking down damaged pipe of any size complete all as specified and as directed |
| 29 | Concrete bed to drain pipe including packing under haunching against the sides of pipe after they are laid and tested in, concrete all as specified and as directed. |
| 30 | Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for including cutting of reinforcement to facilitate the demolition and removing the rubbish off the premises complete all as specified and as directed. |
| 31 | M&L Reinforced cement concrete(Nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 32 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 33 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender