Tender For Augumentation Of Gwss Chopal In G.P.Chopal Tehsil Nerwa Distt. Shimla(H.P) (Sh :----Improvement Of Gravity Line With Circumferential Butt Welding Joints At Various Rds And Laying , Jointing With Built Welding To Various Dia. Of G.I. Pipes
Tender Overview
Project Description
Tender for Augumentation Of Gwss Chopal In G.P.Chopal Tehsil Nerwa Distt. Shimla(H.P) (Sh :----Improvement Of Gravity Line With Circumferential Butt Welding Joints At Various Rds And Laying , Jointing With Built Welding To Various Dia. Of G.I. Pipes Heavy/ Medium Class . And Fabrication Of Common Header ,C/O Reinforced Cement Concrete Intake Chamber , Reinforced Cement Concrete S/Tanks ,C/O Reinforced Cement Concrete Anchor Block At Various Rds And Repair Of S/Tanks Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge. |
| 2 | Providing and laying cement concrete 1:3:6 1cement:3sand: 6 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth. |
| 3 | Providing and laying cement concrete 1:11/2 :3 ( 1cement: 1 1/2 sand: 3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:- |
| 4 | foundation footing and bases of columns & like mass concrete. |
| 5 | Walls(any thickness but ot less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level. |
| 6 | Providing & laying CC 1:2:4 1cement:2 sand 4 graded aggregates 20mm nominal size curing complete excluding cost of form work & reinforcement for RCC work in:- with in all leads and lifts as per the directions of the Engineer in charge. |
| 7 | In suspended floor roofs landing shalves & their support balconies,beams, girders bressumers cantilevers upto floor two level |
| 8 | foundation footing and bases of columns & like mass concrete. |
| 9 | Providing form work with steel plates 3.15mm thick so as to give fair finish I/c centering shuttering propping etc. height of propping below supporting floor to ceiling not exceeding 4mt. Height & removal of same in situ reinforce ment concrete and plain concrete work in :- |
| 10 | Vertical surface such as walls(any thickness) partitions and the like including attached pillasters, butteresses, plinth and string courses and the like. |
| 11 | Flat surfaces such as soffits of suspended floor roofs landing & like floor etc.,upto 200mm thickness. |
| 12 | Edge of slab and break in floor 20 cm wide |
| 13 | Providing mild steel/tor steel reinforcement I/c bending binding and placing in position complete |
| 14 | Steel work welded in built up sections, trusses and framed work including cutting hoisting Fixing in position and applying a priming coat of red lead paint :- |
| 15 | In trusses and trussed purlings in buildings. |
| 16 | White washing with lime on undecorated wall surfaces (two coats) to give an even shade including thoroughly brooming the surface to remove all dirt dust mortor drops and other foreign matter. |
| 17 | Laying and jointing in trenches,galvanised mild steel tubes (Light grade) i/c tube fittings such as Tee, elbow, union & nipple.(earth work in trenches to be measured and paid for separately)i/c all leads and lifts complete. |
| 18 | 15 mm Dia (L) S/S |
| 19 | 20 mm Dia (L) S/S |
| 20 | 25 mm Dia (L) S/S |
| 21 | 32 mm Dia (L) S/S |
| 22 | 40 mm Dia (L) S/S |
| 23 | Painting two coats deco paint on RCC Work including cleaning all dirt, dust and other foreign matters other than white paint |
| 24 | 15 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering up to floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. in Cement mortar 1:3 (1cement :3sand). |
| 25 | Providing and fixing cast iron double flanged sluice valve of leader/ Behl Kirlsker/GIED/ Kilburn/Fouress make nsuction side as per the relevent IS code.PN 1.6 |
| 26 | 50mm Dia |
| 27 | 65 mm Dia |
| 28 | 80 mm Dia |
| 29 | 100 mm Dia |
| 30 | Fabrication and fixing Common Header of G.I. Pipe for distribution of water at various S/tanks, including the cost of jointing with butt welding confirming to IS 816-1969 or latest as appliable and with upto date ammendments (leak proof) in three layers at site of work with welding rods of Advani/Oerliken make/ISI marked(welding rods 3mm to 4mm) and all allied accessories whatever required for welding at site, tail pieces, tees bends & other specials manufactured from parent pipes as applicable to the particular reach & of approved specificatin as per site conditions and cutting of pipes (100 mm Dia Inlet Pipe and 15 mm Dia Out let Pipe ( 12-20 Nos out lets) as per drawing,wherever required as per site requirment i/c carriage in all leads & lifts and as directed by the Engineer-in-charge. |
| 31 | Providing and laying (pours) No fine concrete 1:4 (1Cement : 4 graded stone Agg. 40mm and above and curing complete with weep hole or pours etc. with in all leads and lifts as per the direction of the Engineer in Charge. |
| 32 | R/R masonary/polygone rubble masonry (uncoursed/brought to course) with hard stone of approved quality in foundation & plinth including levelling up with cement concrete 1:6:12 (1cement:6sand:12aggrigate 20mm nominal size)at plinth level in CM 1:6 (1cement:6sand) within all leads and lifts as per the directions of the Engineer in charge. |
| 33 | Laying, testing and commissioning at site in trenches bevelled ended BIS marked GI Heavy conforming to IS 1239 or it equivalent latest with uptodate ammendments of following dia of Heavy/ Medium class, having wall thickness and weight per Rmt. as mentioned below and capable of withstanding required test pressure as presscribed in BIS/IS)code, in random lengths of 5.5 to 6.5mtr. The pipes ends shall be bevelled suitable for butt welding, including the cost of ointing with butt welding confirming to IS 816-1969 or latest as appliable and with upto date ammendments (leak proof) in three layers at site of work with welding rods of Advani/Oerliken make/ISI marked(welding rods 3mm to 4mm) and all allied accessories whatever required for welding at site, tail pieces, tees bends & other specials manufactured from parent pipes as applicable to the particular reach & of approved specificatin as per site conditions and cutting of pipes wherever required as per site requirment i/c carriage in all leads & lifts and as directed by the Engineer-in-charge. |
| 34 | 50 mm Dia (L) S/S |
| 35 | 65mm Dia (L) S/S |
| 36 | Excavation in earth work and disposal of all excavated earth upto all leads and lifts. Disposing earth to be levelled and neatly dressed pick jumper work within all leads and lifts and as directed by the Engineer-in-charge. |
| 37 | Providing & Laying cement concrete 1:6:12(1ccement :6 sand: 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts as per the directions of the Engineer in charge. |
| 38 | Providing and laying cement concrete 1:4:8 (1cement:4sand:8graded stone agg. 40mm nominal size)and curing complete excluding cost of form work in :- a) Foundation and plinth. |
| 39 | Providing and fixing 19 mm thick commercial board water proof shutter for cup boards i/c fixing with nickel plated piano hinges with screws etc complate. |
| 40 | Providing and fixing 19 mm thick commercial board water proof shelves /box for cup boards i/c fixing with butt jointing and nails and screws etc complate. |
| 41 | Providing and fixing 1.00 mm thick coloured or plain laminated sheet ( sunmica ) on board / ply wood sheet with approved adhesive and nails etc complate. |
| 42 | Providing and fixing square edged cover fillets (beading) 19mmx6mm section, i/c mitring at junction with wood screws and nails complate. 1st class deodar wood. |
| 43 | Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1cement:4sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing and polishing complete (sub-base concrete floor to be paid for separately). 45mm thick block. |
| 44 | Providing and fixing 12 mm thick 1st class deodar wood wall panelling fixed over 12mm thick fly i/c fixing with fevicoli and anti moisture sheet with screws etc. complete. |
| 45 | Providing and fixing PVC wall / Ceiling panelling i/c fixing with fevicoli and with screws etc. complete. |
| 46 | Providing and fixing 0.45mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. |
| 47 | Providing and fixing ridges or hips 60 cm overall with 0.45 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. |
| 48 | Brick burnt using in comman burnt clay building bricks in foundation & plinth in C.M. 1:6 conventiohal brick first class |
| 49 | Supplying and Fixing woven plains G.I wire fencing of mesh 50mm to 150 mm to any type of standard rails ,strainging bolts etc. including provision of binding wire, staples etc. |
| 50 | Providing and fixing prepainted steel sheet ceiling with 0.30mm thick in panets of steel channels base frame in ceiling with screws complete (steel channels base frame to be measured and paid for separately complete with all accesoriees as required as per the direction of Engineer-in-charge. |
| 51 | Providing and fixing 10mm thick antiskid water proof stain and impect resitent resistent heavy duty vetrified tiles Nitco or equivalent 600x600mmx10mm manufactured or approved shade and colour in flooring and landings laid over (12mm thick cement mortar 1:3)(1Cement:3Sand)jointed with cement slurry mixed with pigment to match the shade of tiles as required complete within all leads and lifts and as directed by the Engineer-in- charge.. |
| 52 | Providing and fixing vitreous China wash down water closet (European type. W.C. Pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1Cement : 1 Sand) (Seat and cover to be measured and paid for separately) |
| 53 | Providing and fixing Stainless steel kitchen sink with drain board with in all leads and lifts as per the directions of the Engineer in charge. 470X 420X 178MM |
| 54 | Prorviding and fixing vitreous china wash basin with single hole for piller tap with C.I. or M.S. brackets painted white Flat back 630mmx450mm .including cutting holes and making good the same but excluding fittings:-with in all leads and lifts as per the directions of the Engineer in charge. |
| 55 | Providing and fixing PTMT Coloured / white high density polyethlylene / poly propylene 10 liters cap. full flush European standard control low level flushing Cistern with fitting and within all leads and lifts and as directed by the Engin |
| 56 | P/F C.P. brass waste for wash basin or sink (i)32mm diawith in all leads and lifts as per the directions of the Engineer in charge. |
| 57 | P/F C.P. Soap dish with C.P. brass brackets fixed to wooden cleats With C.P. brass screws with in all leads and lifts as per the directions of the Engineer in charge. |
| 58 | P/F C.P. Tap with capstan head(15mm dia) with in all leads and lifts as per the directions of the Engineer in charge. |
| 59 | P/F PVC Ball valve (15mm dia)within all leads and lifts and as directed by the Engineer-in-charge, |
| 60 | P/F C.P. Angle cock 15mm dia within all leads and lifts as per the directions of the Engineer-in-charge, |
| 61 | P/F of PVC Elbow15mm with in all leads and lifts as per the directions of the Engineer in charge. |
| 62 | P/F of PVC Tee 15mm with in all leads and lifts as per the directions of the Engineer in charge. |
| 63 | P/F of PVC Union 15mm with in all leads and lifts as per the directions of the Engineer in charge. |
| 64 | Providing and laying PVC (heavy class) in wall. Ceiling including with in all leads and lifts as per the directions of the Engineer in charge .15mm dia(fiifteen milimetres)nominal size. |
| 65 | Providing and fixing 600mmx450mm bevelled edge miror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. within all leads and lifts and as directed by the Engineer-in-charge. |
| 66 | Providing and Fixing C P Brass towel Rail coplete with CP Brass Bracket fixed I/C Brass Screw 600 mm X 20 mm size. |
| 67 | Providing and Fixing 600x 120 mm glass shelf with CP Brass Bracket and guard rail complete fixed to wooden plug with C.P. brass Screws. |
| 68 | Providing and fixing toilet paper holder (i) C.P. Brass |
| 69 | Providing & fixing C.I. gratings (100x100) |
| 70 | Providing and fixing in trenches 10 Kg.f/cum2 working pressure unplasticized P.V.C. pipe (Conforming to IS: 4985-1968) complete fittings (earth work in trenches to be measured and paid for separately):- |
| 71 | 110 mm out side diameter. |
| 72 | Elbow 110 mm dia. |
| 73 | Clamps 110mm dia. |
| 74 | Door Bends |
| 75 | Plain bends |
| 76 | Collar |
| 77 | Floor Traps Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender