Tender For Providing & Fixing Glow Sign Board With Acp, Iron Frame And Fixing Of Acp Led Letter Signage And Fixing Of Nonlit Photo Frame In Power House Of Omkareshwar Power Station - Phase-Ii
Tender Value
14.78 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
16 days left
EMD
30000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Nimar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing & Fixing Glow Sign Board With Acp, Iron Frame And Fixing Of Acp Led Letter Signage And Fixing Of Nonlit Photo Frame In Power House Of Omkareshwar Power Station - Phase-Ii
BOQ
| Sl. No. | Item Description |
| 1 | Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washersetc. complete.Hot finished welded type tubes |
| 2 | Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 3 | Providing and fixing aluminium composite panel with 3 mm thick ACP sheet in required pattern colour and panel size including opening /folding panels,duly fixed extruded aluminium section frame duly fixed with screws etc. including fixing of ACP sheet with sealant compound wherever required as per direction of Engineer-in-charge work up to 5.0 m above the ground level |
| 4 | Providing & Fixing Glow Sign Board with Backlit Flex Media 600x600 dpi, high quality print on HP Latex machine with 100 Micron over matt lamination – 1”x1” square MS frame (5 kg+ pipe) 8” depth with 2 coat enamel paint for protection from rust & corrosion, Aluminium angle fitting for edge glow. Box – back side premium GI sheet , Side panel – Half white coated GI sheet. Lighting technologies: Ultra glow LED module (2 year warranty) High brightness & reliable, Energy saving, Environment friendly.High performance water proof LED Driver – IP68 (3 year warranty) Protections: overload/ over voltage/ short circuit. |
| 5 | Providing and fixing Plain precoatedgalvanised iron profile sheets (size, shape and pitch of Plain as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thicknesswith zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 6 | Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded6.8 grade (yield strength 480 N/mm2), counter sunk head, comprisingof 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge.10x160mm |
| 7 | Providing & Fixing ACP – LED LETTER SIGNAGE with Front Facia: 3 mm thick Aluminium Composite Panel (ACP) 1”x1” square MS frame (5kg+ pipe) 8” depth with 2 coat enamel paint for protection from rust & corrosion, 3 mm cast Acrylic Laser cut 2.5” Embossed Letter. Vinyl cut & paste (if required).Lighting technologies: Any reputed make LED module (3 year warranty) LED design for humid & waterproof: IP67, power dissipation: 1.08W, Input : DC 12V Energy saving, Environment friendly. 3 mm ACP Back for LED module mounting. High performance water proof LED Driver – IP68 (3 year warranty) Protections: overload/ over voltage/ short circuit. |
| 8 | Providing &Fixing Nonlit Photo Frame with high quality print with 100 Micron over Glossy/matt lamination & mounting on 6mm high density Sun board/ WPC sheet with fancy PVC frame & hook fitting for hanging. |
| 9 | Providing & Fixing Mural Art of Wall : Material 6 mm MDF & ply 12 mm with colours with artist work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender