Tender For Emergency Repair Of Various Structures Inside Red Fort Complex, Delhi
Tender Value
54.48 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
6 days left
EMD
1.08 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Emergency Repair Of Various Structures Inside Red Fort Complex, Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Material and Work |
| 2 | Provision for Recessed Pointing the Open Joints of Lakhori Brick Masonry in Lime Surkhi Mortar in 1:1:1 (1 Lime: 1 Surkhi: 1 Coarse Sand) mixed with adhesive materials such as belgiri, gur, gum & san with racking, cleaning & washing the joints including carriage of water & material etc complete. |
| 3 | Providing 40 to 50 MM Thick Plain lime plaster in lime Surkhi mortar 1:1:1 (1 lime : 1 surkhi : 1 coarse sand) mixed with adhesive materials such as Gur, Belgiri, Gum & San including carriage of water & materials etc complete. |
| 4 | Taking Out of Damages/weathered Red stone pannels vineering stone/Ornamental stone with pan patti work/ Dab Gola Stone/ Base Moulded dab Stone bit by bit very carefully by manual means without disturbing an adjoining structure disposal of unseviciable materials away from site as per direction of Engineer in-charge . |
| 5 | Providing and fixing highly ornamental design/moulded flowered red sand stone in dab stone, architrave very carefully strictly in accordance similar to the original in lime mortar 1:1:1(1 U.Lime katni, 1 Surkhi, 1ghaghar sand) mixed with adhesive material including carriage of water and material with in 100mtr lead & lift 3mtr app. etc complete |
| 6 | Providing and fixing highly moulded sand stone in gola galta, architrave very carefully strictly in accordance similar to the original in lime mortar 1:1:1(1 U.Lime katni, 1 Surkhi, 1ghaghar sand) mixed with adhesive material including carriage of water and material with in 100mtr lead & lift 3mtr app. etc complete. |
| 7 | Providing and fixing of 100mm thick Red sand Veneering stone including fix new stone as per existing orignal with composite lime mortar 1:1:1( 1 Lime :1 Surkhi : 1 C. sand) mixed with natural adhesive material including all lead from stacking yard to working site etc complete |
| 8 | Supply and fixing of Red sand Base dab compressive Stone including fix new stone as per existing orignal with composite lime mortar 1:1:1( 1 Lime :1 Surkhi : 1 C. sand) mixed with natural adhesive material including all lead from stacking yard to working site etc complete. |
| 9 | Providing & fixing chisel dressed six side facing marble Railing having Lattu/Mudakka at Top as per existing at site, fixing in position by making of male female grove and using steel/copper dowel, pin etc as per requirement complete |
| 10 | Taking out of damaged and pulverized sand stone chajja 50 to 100 mm thick bit by bit very carefully to avoid any damage to the stone including scooping out the dead mortar for fixing of new stone for chajja and disposal of rubbish with in a lead upt 200 m and left 6.00 m approx |
| 11 | Providing and fixing red sand stone fine chisseled dressed slopping Chajja of 50 to 100 mm thick having butt joint to join with adjacent chajja stone and set in Lime mortar of ratio 1:1:1 (1u/lime , 1surkhi, 1c.sand) mixed with adhesive material and ss dowel including pointing with same mortar etc complete. |
| 12 | Taking out of half inner core existing bracket after fallen down of north side bracket very carefully to avoid any damage to side gardana stone and uperside structure including removal of rubbish with in lead 200 to 300 mtr (At Diwan-i-Aam to T-House dumping ground and lift 15 to 20 mtr (approx) |
| 13 | Providing and fixing Red sand stone brackets Lime mortar of ratio 1:1:1 (1u/lime , 1surkhi, 1c.sand) mixed with adhesive material and ss dowel including pointing with same mortar etc complete.as per original existing designs including cutting of grooves for fixing of Gardana and Chajja upto a distance of lead 200 to 300mt and lift 15 to 20mt approximately etc complete. |
| 14 | Providing and fixing red sand stone gardana below Chajja stone in lime motar 1:1:1 ( 1U/S lime Katni, 1 Surkhi, 1 C. Sand Ghagar River) mixed with adhesive materials such as Gur, Belgiri, Gum & San including carriage of water & materials etc complete shape is as per exitiing site carfully without damaging adjecent stone lead upto 250 mt and lift upto 18 mt hight approx |
| 15 | Providing and laying gola in lime with 10 to 20mm nominal size brick aggregate and 50% lime mortar in 1:1:1 ratio (1 (Unslakaed lime katni : 1 C. sand : 1 surkhi.) adding adhesive material like gur, gam and belgiri compete with in lead approx 500mtr. and upto the hight of 18 mt approx |
| 16 | Random rubble masonry with hard stone in superstructure above plinth level and upto wall level, including leveling up with lime concrete 1:1:1 (1 U/S lime: 1 coarse sand : 1 surkhi) at wall level and the like |
| 17 | Provision for providing and fixing of XPM wire mesh jali to protect and stop the entry of birds through the upper structures of terrace |
| 18 | providion of providing and placing of half earthen of dia0.80 m and 0.25 mm thick port over the ventiator at roof of rang mahal as per existing design upto the hieght of 12 mt and lead approx upto 250m manualy including transportaion charges etc complete |
| 19 | Ply wood 5 ply, 9 mm thick Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type |
| 20 | \\"Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/ structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose.(2) The payment will be made once only for execution ofall items for such works.\\" |
| 21 | Disposal of building rubish/malba/ similar unservisable, dismentaleted or waste materials by mechanical menas uncluding loading, transporting , unloading to dumping ground or as approved by Engineer-in charge beyond 50m intial lead for all leads including all lifts involved lead 10 to 20 km aprox |
| 22 | Providing & fixing chisel dressed six side facing resand stone Railing having Lattu/Mudakka at Top as per existing at site, fixing in position by making of male female grove and using steel/copper dowel, pin etc as per requirement complete. |
| 23 | Providing and fixing of 50mm thick Red sand railing panel stone including fix new stone as per existing orignal having ornamental carving over the moat wall edge fixied with composite lime mortar 1:1:1( 1 Lime :1 Surkhi : 1 C. sand) mixed with natural adhesive material including all lead from stacking yard to working site etc complete |
| 24 | Pointing in Red sand stone joints with lime mortar 1:1:1( 1 lime: 1 brick jeera:1 c sand) mixed with composite material including matching with coloring pigment etc complete. |
| 25 | Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per direction of Engineer-inCharge.Sal wood battens |
| 26 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 27 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 9.111.1 50x50 mm (base and height) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender