Public Administrative Department Trust & NGO Closing in 25 days TDR #58517389

Tender For Construction Of New (1)Virundhu Mandapam (2)Goat Skin Removing Room (3)Toilet Block For Men & Women-4 Nos (4)Women Dress Changing Room - 2 Nos(5)Nizhal Mandapam (6)Devotees Rest Room At Arulmigu Muthumariyamman Temple, Thayamangalam Villag

Issued by Trust & NGO · Sivaganga, Tamil Nadu
Tender Value
5.70 Crore
Estimated cost
Bid Submission
16 Dec 2026
25 days left
EMD
2.96 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sivaganga → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of New (1)Virundhu Mandapam (2)Goat Skin Removing Room (3)Toilet Block For Men & Women-4 Nos (4)Women Dress Changing Room - 2 Nos(5)Nizhal Mandapam (6)Devotees Rest Room At Arulmigu Muthumariyamman Temple, Thayamangalam Village In Ilaiyangudi Taluk, Sivagangai District .

BOQ

Name of Work:- Construction of new (1)Virundhu Mandapam (2)Goat skin removing room (3)Toilet Block for Men & Women-4 Nos (4)Women Dress changing room – 2 Nos(5)Nizhal Mandapam (6)Devotees rest room at Arulmigu Muthumariyamman Temple, Thayamangalam Village in Ilaiyangudi Taluk, Sivagangai District .
Sl. No. Item Description
1Name of Work : Construction of new (1)Virundhu Mandapam (2)Goat skin removing room (3)Toilet Block for Men & Women-4 Nos (4)Women Dress changing room – 2 Nos(5)Nizhal Mandapam (6)Devotees rest room at Arulmigu Muthumariyamman Temple, Thayamangalam Village in Ilaiyangudi Taluk, Sivagangai District .
2Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.
3Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.
4Supplying and filling in foundation, basement, etc with filling M Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
5Supplying and FILLING GRAVEL Supplying and filling in 'foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.
6Supplying and filling with quarry dust with gravel in layers of not more than 15 cm thick including watering , consolidation etc, complete as directed by the Engineer incharge of works and as per the technical specifications
7Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification (Missionary)
8Refilling with excavated earth other than crushed stone sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification
9Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
10Foundation & Basement
11Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
12For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
13For plane surfaces such as rectangular or square RCC columns sunshades, top and bottom slab of RCC boxing etc
14curved surface
15Ground Floor
16Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
17Foundation & Basement
18Ground Floor
19Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
20Brick work in Cement Mortar1:5 using best quality III class Country bricks of size 8-3/4\\" x 4-1/4\\" x 2-3/4\\" for foundation and basement including curing, etc., complete complying with standard specifiction.
21Foundation & Basement
22Brick work in Cement Mortar1:5 using best quality III class Country bricks of size 8-3/4\\" x 4-1/4\\" x 2-3/4\\" for foundation and basement including curing, etc., complete complying with standard specifiction.
23Foundation and Basement
24Above Basement
25Brick work using using Country Bricks of size 8-3/4\\" x 4-1/4\\" X2-3/4\\" in Cement Mortar 1:5(One cement and five sand) including curing neat finishing, etc., complete complying with standard specifiction.
26Ground Floor
27Brick partition walls of 10.80cm thickness using best quality country bricks of size 8-3/4\\" x 4-1/4\\" x 2-1/4\\" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
28Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
29Plastering with cement mortar 1:3,12mm thick (one cement and three sand) mixed with approved quality water proofing compound conforming to Indian standard specification as speci fled by the departmental officers at 2% by weight of cement used etc complete complying with standard specification.
30Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
31Painting One Coat with White Cement for priming Coat complete.complying with Standard specification in all floors including all cost of materials brushes, scaffolding charges etc., complete complying with standard specification.
32Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
33Painting two coats with apporved water based Interior emulsion paint over cement plasterd wall surface priming coat including thorough scrapping, clean removal of dirt etc., and coveyance of all matierials all labour charges brushes,clening,preparing the surface scaffolding and curing charges etc.,complete.
34Painting Two Coat with White emulsion paint for Celling Plastering complying with Standard specification in all floors including all cost of materials brushes, scaffolding charges ect., complete complying with standard specification
35Painting New iron work such as steel doors, windows, ventilators windows bars balustrades etc.,with two coats of best approved quality Synthetic enamel paint over a primring coat with ready mixed primer of approved quality Excluding cost of priming coat etc., complete complying with standard specification ( The make, quality and collour of paint should be got approved by the Executive Enginneer before use on works)
36Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
37Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. 300x450x8mm
38Weathering course Concrete using best Quality brocken jelly of size 20mm uniform gange in pure slacked line (no sand to be used) the proportion of brick jelly to lime being 32:12 1/2 by volume and laid over the RCC roof slab in a single layer and consolidated to the required and designed finished thickness by beating the concrete by wooden beaters of approved pattren keeping the surface constantly wet by sprinkling lime jaggery water etc.complete complying with standard..
39Paving the floor with concrete anti-skid tiles(Eurocon) to Required shape and design of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
40Finishing the floor with new Ceramic Tiles 305 x 305 x 8mm of approved colour and make over a base layer of C.M.1: 3 - 20mm thick and pointing with same mortar etc., including cost and conveyance of all materials labour for mixing laying Complete etc as directed bu the Engineer in charge.Jointfree,
41Suppliy and Fixing Cubboard with Cuddapah slabs (Super fine polished with machine cut edges) of sizes 4'x2' and above 20/30mm thick.
42Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc.,
43Fabricating, Supplying and fixng in position of steel sheeted windows ( Two Leaves) with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion 'J' section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly.
44(M-0674) Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
45(M-0674) Fabricating, Supplying and fixng in position of steel sheeted windows (Two Leaves) with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion 'J' section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly.
46(M-0673) Supplying and fixing Solid core partical board flush door shutters with both sides 3mm thick commercial ply of 35mm thick with T.W internal lipping (internal alround) with necessary adheshive and C.P.screws ,including fixing of aldrops tower bolts hinges and lock strike plates,putty,fevical,varnish for T.W. lipping with thinner colouring agent etc.,The rate includes cost of materials and cost for aluminium furniture fittings such as 3 nos Alu.hinges 125mm 1 no alu.aldrop 200 x 16mm, 1 no Alu, tower bolt of 150 x 12mm and 1 no Alu, 100mm D type Handle 1 no door stopper with rupper bush incase of single leaf door inclusive of labour charges for fixing in position etc.,complete all Aluminium furniture fittings are to be anodised with matt finish under electrically controlled condition in accordance with ISI Specfication 1868/1968 for anodic flim thickness of not less than 15 microns, the rate is inclusive cost of fevical and fixing charges transportation loading unloading and all other incidential charges handling charges etc.,complete complying with standard specification.
47Supplying and fixing solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames 15mm MS Square tubes for top lock and bottom rails.the steel tubes shall be covered with 5mm thick solid PVC sheets.shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings.the over all size of styles shall be 50mm x 30mm. The over all size of top rail and bottom rail shall be 75mm x 30mm.The over all size of frames shall be 50mm x 45mm, with sutiable rabate for housing the shutter including sliding arrangements. M-0678
48Providing fixed lowen of gap 100 mm Aerocon panel of Thickness of 50mm including cutting the panel to the size and fixing etc., complete.,
49Supplying and Fixing of Weld mesh of size 25mm x 25 mm (1\\"x1\\") of 18 gauge fitted with M.S Flat of size 25x6mm and fixing with screws in the wall for opening and finishing etc.,complete.
50Finishing the top of roof with one course of approved best quality machine pressed square tiles of size 23X23X2cm laid in cement mortar 1:3 (one cement and three sand) 12mm thick mixed with water proofing compound conforrning.to 1.5.5. at by weight of cement used and joints pointed neatly to full depth of tiles with same mortar mixed with water proofing compound and red oxide etc complete complying with standard specification.TNBP No: 55 44, 44 H
51Finishing the top of slopped roof, with Mangaloor Tiles of approved quality laid in cement mortar 1:3 20mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same red oxide mixed mortar etc complete, complying with standard specifications
52Finishing the top of slopped roof with Machine Pressed Ornamental Tiles of approved quality laid in cement mortar 1:3 20mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same red oxide mixed mortar etc complete, complying with standard specifications
53Providing and fixing PVC rain water down fall pipes of 110mm dia meter with working pressure at 4 kglm2 with necessary shoes, beads, other special clamps, screws rails, teak wood plugs etc complete including cost of all materials. The rate is to include cost of removable iron grating of appropriate size. The size of teak wood plug to be used shall be I SOrnmx25mm infront and 200x75nnn in all other sides with a depth of I 00mm, The pipe is to be fixed by means of U clamps screwed to the plugs as directed by the departments I officers complying with standard specification.TNBP No : SS 107.
54Supplying and fixing in position of RCC Jolly of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing, centering etc complete complying with standard specification
55Supplying and fixing mild steel grill Gate including cost conveyance of all materials and fixing in position including priming coad etc.,complete with standard specifications.
56Providing Cutstone (Single Line Dressed) flooring laid over the CC1;5;10 bed and pointing with C.M1:3 to the full depth of Cutstone complete
57(M-0390) Supplying and fixing solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames 15mm MS Square tubes for top lock and bottom rails.the steel tubes shall be covered with 5mm thick solid PVC sheets.shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings.the over all size of styles shall be 50mm x 30mm. The over all size of top rail and bottom rail shall be 75mm x 30mm.The over all size of frames shall be 50mm x 45mm, with sutiable rabate for housing the shutter including sliding arrangements. M-0390
58Supplying laying and jointing PVC pipes (having working pressure 10Kg/Sq.cm) of approved quality and best veriety conforming to BIS of the following dia including cutting threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plug, PVC clamps and screws making holes on the wall or drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work/ cement concrete and plastering neatly whever necessary scaffolding charges etc., complete complying with standard specification
5932mm dia pipe below ground level
6032mm dia pipe above ground level
6125mm dia pipe above ground level
62Supplying PVC specials (with working pressure 10Kg/sq.cm) in water supply arrangements (both in internal & external water supply arrangements). Note: Since the labour for cutting threading / plastering sundries have already been included under pipe line item of works, no separate provisions for fixing PVC specials need to be allowed.
63Coupler
6415 mm dia
6520mm dia
6625mm dia
6732mm dia
68Elbow
6915 mm dia
7020mm dia
7125mm dia
7232mm dia
7315 mm dia
7420mm dia
7525mm dia
7632mm dia
7715 mm dia
7820mm dia
7925mm dia
8032mm dia
81Reducer
8220mm X 15 mm
8325mm X 20mm
8432mm X 25mm
85Reducer Elbow
8620mm X 15 mm
8725mm X 20mm
8832mm X 25mm
89Supplying and fixing in position first quality and approved variety of Gun metal gate valve / with BIS make of the following dia including cost of shellac, thread balls etc., complete complying with standard specification ( for both internal and external water supply arrangements)
90Fixing gate valve of dia 25mm
91Fixing gate valve of dia 32mm
92Supplying and fixing in position 15mm dia brass CP screw down tap/ pillar tap (heavy duty) of approved make conforming to BIS specification and quality including cost of shellac, thread etc., complete complying with standard specification and including cutting and threading wherever necessary.
93Pillar Tap
94Swan Neck Tap
95Supply and delivery and fixing of HDPE tank 1000 litres capacity as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges as directed by departmental officers etc.,
96Water tank
97Supplying and fixing in position best quality and approved make indian made white / colour glazed earthernware wash hand basin of size 550 X 400mm (with pedestal / without pedestal)
98Supplying and fixing in position of Indian make Water Closet Oriyya Type (Colour) of size 580mm X 440mm of approved uality with 'p' or 's' trap.
99Supplying and fixing in positon European Water Closet with \\"P\\" or \\"S\\" Trap with Double falpped seat and seat cover with Brass Hinges and 10 litre capacity low level flushing tank with all internal fittings etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
100Supplying and fixing in position Indian make white glazed earthenware squating type urinal of best quality and approved make including dismantling masonry, if necessary and re-doing the same to original condition, etc., complete complying with standard specification. (The squatting urinal should be got approved by the Executive Engineer before use on works).
101Supplying and fixing in position of P V C Nahini Trap of size 100 x 75mm with best stainless Steel Gratings of approved make and quality, fixed over a bed of of brick jelly concrete 1:2:5 (One part of Lime, Two parts of Sand and Five parts of 40mm size brick jelly) and finished with cement mortar 1:3 ( One part of Cement and Three parts of Sand) including cost and conveyance of all materials and labour charges including dismantling the masonry works wherever necessary and making good etc complete
102Supplying and fixing in position of PVC Ventilating shaft 110mm dia and 3m height including cost and conveyance of all materials and all labour charges for cutting fixing in position etc., complete.
103Supplying and filling 40mm HBG stone jelly in filter bed / Dispersion trench including cost and conveyance of all materials and labour charges for fixing in position etc., complete.
104Supplying and fixing in position of bewelled edge mirror of size 600x450 mm quality including cost of rawal plugs brass screws and conveyance of all materials and labour charges for fixing in position etc., complete.
105Supplying and fixing in position of c.p towel rail of size 60cm quality 20mm with brackets for best quality including cost of rawal plugs brass screws and conveyance of all materials and labour charges for, fixing in position etc., complete.
106Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6kg/sq.cm pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws etc., and making connection to all sanitary fitting, dismantled portion to the original condition, including testing for any leakages etc., complete complying with standard specifications. ( The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid seperately in the cases where the pipe lines are proposed to laid.
107Above Ground Level
108110mm dia PVC Pipe
109Above Ground level 90mm PVC pipe
11075mm dia Pipe
111Bath room drainage
112(M-0872) Below Ground level 110mm PVC pipe M-0872
113(M-0870) Below Ground level 90mm PVC pipe M-0870
114(M-0869) 75mm dia Pipe M-0869
115Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the wall and giving connection of PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. ( The PVC specials should be got approved by the Executive Engineer before use on works).
116PVC specials of 160mm dia
117160mm dia PVC Plain bend
118160mm dia PVCElbow with door
119160mm dia PVC Tee
120160mm dia PVC Plain Bend
121110mm dia PVC Elbow
122110mm dia PVC Door Elbow
123110mm dia PVC Tee
124110mm dia PVC Tee with Single Door
125110mm dia PVC Plain Bend
12675 mm dia PVC Elbow
12775mm dia PVC Door Elbow
12875mm dia PVC Tee
12975mm PVC Tee with Single Door
13075mm dia PVC Plain Bend
131Supplying and fixing in psition PVC cowls of the following dia of approved quality confirming to BIS, etc., complete complying with standard specifications. ( The PVC cowls should be got approved by the Executive Engineer before use on works).
132110mm dia PVC Cowl (including w.c top level pipe)
13390mm dia PVC Cowl trap top level
134Supplying and filling 20mm HB Jelly in Dispersion trench etc complete complying with standard specification
135Supplying and fixing stone ware pipe 100mm dia tight joints etc cuplying with standard specifications
136Supplying and fixing stone ware pipe 100mmdia Loose joints etc complying with standard specifications.
137ELECTRICAL ARRANGEMENTS
138Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Lower End (DATA A1)
139Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Lower End (DATA A2)
140LIGHT FIXTURES
141Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blockson wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting(SD 443)
142Supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . (SD 456)
143Supply and fixing of WT BH fitting with Guard Suitable for 15W LED bulb (SD 83)
144Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . (SD 457)
145Supply and fixing of 1200mm (48\\") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp (SD 110 )
146Supply and fixing of 300mm (12\\") sweep (Heavy duty) AC exhaust fan complete without provision of holes in the wall (DATA A3)
147Supply and fixing of louvers shutters arrangements for 300mm (12\\") sweep (light duty) AC exhaust fan (SD 120)
148Supply and fixing of 375mm (15\\") sweep (heavy duty) AC exhaust fan complete without provision of holes in the wall (DATA A4)
149Supply and fixing of louvers shutters arrangements for 375mm (15\\") sweep (light duty) AC exhaust fan (SD 121)
150WALL SOCKETS
151Supply and fixing of 2 nos.6A two module 3 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections. Lower End (SD 385)
152Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections. Lower End (SD 391)
153Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD 402)
154RUN OF MAINS
155Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion (SD 334)
156Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour (SD 57)
157Supply and run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour (SD 61)
158OVER HEAD SERVICE
159Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains (SD 65)
160Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD 70)
161Supply and run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade on 7 / 20 GI bearer wire for service connection mains (SD 67)
162Supply and run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains (SD 72)
163DISTRIBUTION BOARDS
164Supply and fixing of 4 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 4 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. (DATA A5)
165Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door metal with 1 no.32A DP MCB swtich as incoming and 10 nos .6A to 32A SP MCB as outgoing on wall with earth connection only. Lower End (SD 528)
166Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Lower End (SD 549)
167Supply and fixing of Douple pole sheet steel enclosure with 1 no 40 A DP MCB on wall and necessary connection for street light control (DATA A6 )
168UG CABLES
169Supply and clarnping of 2*6 sq.mm PVC LTUG aluminium armoured cable on post or on wall with MS clamps (SD 198)
170Supply and fixing of brass gland for 2*6 sq.mm PVC armoured LTUG aluminium cable with earth connection (SD 159)
171Supply and laying 2*16 sq.mm. PVC armoured LTUG alu.cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good (DATA A7)
172Supply and clarnping of 2*16 sq.mm PVC LTUG aluminium armoured cable on post or on wall with MS clamps (SD 200)
173Supply and fixing of brass gland for 2*16 sq.mm PVC armoured LTUG aluminium cable with earth connection. (SD 161)
174METER BOARDS
175Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2\\" x 1-1/2\\" x 1/4\\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1\\" x 1/4\\" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with 1 No 63 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection with earth connection complete (SD 131)
176Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1 No 40 Amp 30MA Double Pole RCD / RCCB (Lower End) with suitable necessary connection.(SD 126)
177EARTHING
178Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry . (SD 221)
179Supply and Run of 1 of No.8 SWG copper wire for earth connection (SD 371)
180GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58517389
AUTHORITY Trust & NGO
TENDER VALUE 5.70 Crore
LAST DATE 16-12-2026
Authority
Authority Name Hindu Religious And Charitable Endowments Department
Work Description Tender for Construction Of New (1)Virundhu Mandapam (2)Goat Skin Removing Room (3)Toilet Block For Men & Women-4 Nos (4)Women Dress Changing Room - 2 Nos(5)Nizhal Mandapam (6)Devotees Rest Room At Arulmigu Muthumariyamman Temple, Thayamangalam Village In Ilaiyangudi Taluk, Sivagangai District .
Basic Detail
Tender No MASTER PLAN of basic amenities and infrastructure
Bidding Type Tender
Location
City Sivaganga
State Tamil Nadu
Key Dates
Publish Date 13 Nov 2026
Submission Date 16 Dec 2026
Open Date 16 Dec 2026
Finance
Tender Value 5.70 Crore
Tender Fee Ref. Documents
EMD 2.96 Lakhs
Exemption Available
Document List
401b2cec-7ddf-496e-ba8e-3f6e084f004f.html
BOQ_871478.xls
Tendernotice_1.pdf
Thayamangalamtenderdocume_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 13, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 16, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 25 days
Dec 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 25 days

Tender Documents

Download All (ZIP) ↓
html

401b2cec-7ddf-496e-ba8e-3f6e084f004f.html

xls

BOQ_871478.xls

pdf

Tendernotice_1.pdf

pdf

Thayamangalamtenderdocume_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender