Tender For Maintanence Of Toilet Athanoor Salai, Keppar Patinam, Gandhi Silai Back Side, New Bus Stand, New Bus Stand(Handicaped), Pattari Street(Weekly Market) At Manamadurai Municipality.
Tender Value
3.15 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
13 days left
EMD
3150
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sivaganga → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintanence Of Toilet Athanoor Salai, Keppar Patinam, Gandhi Silai Back Side, New Bus Stand, New Bus Stand(Handicaped), Pattari Street(Weekly Market) At Manamadurai Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs |
| 2 | Dismantling the Plain Cement Concrete cleaning away and carefully stacking materials useful for re use etc complete. |
| 3 | Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 4 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means |
| 5 | Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification |
| 6 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement |
| 7 | Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles,plates,sheets,fabrication charges,cost of hold fast and transportation charges etc.complete.. |
| 8 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications |
| 9 | Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting |
| 10 | Supply and fixing of 7W / 9W LED Bulb of using 9w including all cost material,labour charges etc..,complete. |
| 11 | Supply and fixing of PVC Pipe and specials including cost and conveyance of material charges etc..,complete as per standard specification |
| 12 | 25mm PVC pipe |
| 13 | 25mm PVC Elbow |
| 14 | 20mm Tap |
| 15 | 25X 20mm PVC Reducer Elbow |
| 16 | 25mm PVC Tank Nipple |
| 17 | 25mm PVC Tee |
| 18 | 75mm PVC pipe |
| 19 | 75mm PVC Elbow |
| 20 | 75mm PVC Tee |
| 21 | 110mm PVC pipe |
| 22 | 110mm PVC Elbow |
| 23 | 110mm PVC Tee Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender